Iiyama ProLite LE4262S Bedienungsanleitung
Iiyama
LCD-Monitore
ProLite LE4262S
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Iiyama ProLite LE4262S (46 Seiten) in der Kategorie LCD-Monitore. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/46

ENGLISH
Thank you very much for choosing the iiyama
LCD display.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the display.
Please keep this manual in a safe place for
your future reference.
USER MANUAL


ENGLISH
We reserve the right to change specifi cations without notice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the
address: http://www.iiyama.com
You can access the Web page of diff erent countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD display complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL3240/PL4340/PL4840/PL5540

ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................5
CLEANING ......................................................................................5
BEFORE YOU OPERATE THE DISPLAY ............................................6
FEATURES......................................................................................6
CHECKING THE CONTENTS OF THE PACKAGE ........................ 6
UNPACKING : ProLite LE5540S .....................................................7
CONTROLS AND CONNECTORS : DISPLAY ................................8
INSTALLATION .............................................................................10
CONTROLS AND CONNECTORS : REMOTE CONTROL ........... 11
PREPARING THE REMOTE CONTROL.......................................12
BASIC OPERATION ......................................................................13
CONNECTING YOUR THE DISPLAY ...........................................16
COMPUTER SETTING .................................................................18
OPERATING THE DISPLAY ...............................................................19
ADJUSTMENT MENU CONTENTS ..............................................21
POWER MANAGEMENT FEATURE .............................................33
TROUBLE SHOOTING ......................................................................34
RECYCLING INFORMATION .............................................................35
APPENDIX ........................................................................................36
SPECIFICATIONS : ProLite LE3240S ..........................................36
SPECIFICATIONS : ProLite LE4340S ..........................................37
SPECIFICATIONS : ProLite LE4840S ..........................................38
SPECIFICATIONS : ProLite LE5540S ..........................................39
DIMENSIONS : ProLite LE3240S .................................................40
DIMENSIONS : ProLite LE4340S .................................................40
DIMENSIONS : ProLite LE4840S .................................................41
DIMENSIONS : ProLite LE5540S .................................................41
COMPLIANT TIMING ....................................................................42

ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE DISPLAY WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the display
and contact your dealer or iiyama service center immediately. Further use may be dangerous and
can cause fi re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the display. Removing the cabinet may expose you to the danger of
fi re or electric shock.
DO NOT PUT ANY OBJECT INTO THE DISPLAY
Do not put any solid objects or liquids such as water into the display. In case of an accident, unplug
your display immediately and contact your dealer or iiyama service center. Using the display with
any object inside may cause fi re, electric shock or damage.
INSTALL THE DISPLAY ON A FLAT, STABLE SURFACE
The display may cause an injury if it falls or is dropped.
DO NOT USE THE DISPLAY NEAR WATER
Do not use where water may be splashed or spilt onto the display as it may cause fi re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the display only with the specifi ed power supply. Use of an incorrect voltage will
cause malfunction and may cause fi re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the display or any other heavy
objects on the cables. If damaged, the cables may cause fi re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the display during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS

ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the display where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause fi re, electric shock or damage. You should also avoid areas where the
sun shines directly on the display.
DO NOT PLACE THE DISPLAY IN A HAZARDOUS POSITION
The display may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the display, and that all cables are routed such that children may not pull
the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the display from overheating. Covering the slots may cause
fi re. To allow adequate air circulation, place the display at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the display. Ventilation slots on the back of the
cabinet will be blocked and the display may overheat if the stand is removed. This may cause fi re
or damage. Operating the display on its back, side, upside down or on a carpet or any other soft
material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE DISPLAY
When you move the display, turn off the power switch, unplug the display and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause fi re or electric shock.
UNPLUG THE DISPLAY
If the display is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause fi re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE DISPLAY ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the display, otherwise, you may
damage your computer.
REMARK FOR USAGE 24/7
This product is not specifi cally designed for 24/7 usage. (Recommended operating time is 12 hours/
Day.)
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the display against a bright background or in a dark room.
For optimal viewing comfort, the display should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the display over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS

ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE - When you fi rst turn on the LCD monitor, the picture may not fi t in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.
- You may fi nd slightly uneven brightness on the screen depending on the desktop
pattern you use.
- Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the Power Switch for
hours.
SPECIAL NOTES ON LCD MONITORS
This LCD cannot be used outdoors.
If you use a cable longer than the supplied one, the picture quality is not guaranteed. Touch
function can be disrupted if the USB cable length exceeds 3m.

ENGLISH
4 FOR YOUR SAFETY
USAGE CONFIRMATION
This product is designed for optimum usage at 12hours per day.
The display is compatible for usage in Landscape applications.
IMAGE PERSISTENCE / IMAGE STICKING
Please be aware that all LCD screens can experience Image Persistence or Image Sticking. This
occurs when a residual image remains tatic images are displayed for long visible on a screen when s
periods of time. LCD Image Persistence is not permanent but constant images being displayed for a
long period of time should be avoided.
To counteract Image Persistence, turn off the monitor for as long as the previous image was
displayed, so if an image was on the monitor for 1 hour and there is evidence of a residual or “ghost”
image, you should turn off the monitor for 1 hour in order to clear the residual image.
For all LFD products, iiyama recommends displaying moving images and utilising a moving screen
saver at regular intervals whenever the screen is idle. You could also turn off the monitor when not
in use to assist the prevention.
Other ways to reduce the risk of Image Persistence will be to utilise the FAN-on function (if
available), Low Backlight and Low Brightness settings.
FOR EXTENDED USE AS A PUBLIC DISPLAY
Image Sticking on LCD Panel
When a static image is displayed for hours, an electric charge trace remains near the electrode
inside the LCD producing a “ghost” image. (Image Persistence).
Image Persistence is not a permanent feature.
Recommendations
To prevent Image Sticking and promote longer life expectancy of display, we recommend the
following:
1. Avoid static images displayed for long periods – change static images on continuous loop.
2. Turn off monitor when not in use, either by remote control or use Power Management or Schedule
functions.
3. When monitor is installed in high ambient temperature environment(s) or in an enclosed position,
utilise the Cooling Fan, Screen Saver and Low Brightness functions.
4. Suitable ventilation for any monitor is an expectation of any installation – climate control systems
may need to be employed.
5. We strongly recommend utilisation of active cooling with fans for long operation times or high
ambient temperature environments.

ENGLISH
FOR YOUR SAFETY 5
NOTE
If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
WARNING
If you drop any materials or liquids such as water into the
display
when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
For safety reasons, turn off the power switch and unplug the display before you
clean it.
NOTE
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and
the LCD screen.
Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
Thinner Benzine Abrasive cleaner
Spray-type cleaner Wax Acid or Alkaline solvent
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
LCD
SCREEN
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
CUSTOMER SERVICE
CLEANING

ENGLISH
6 BEFORE YOU OPERATE THE DISPLAY
The following accessories are included in your package. Check to see if they are enclosed with
the display. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama offi ce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any
problems or damage caused by a power cable not supplied by iiyama.
Power Cable* VGA(D-sub) Signal Cable DVI-D Signal Cable
RS-232C Cable Remote Control Battery (2pcs)
POP Label iiyama Logo Sticker EU Energy Label
Safety Guide Quick Start Guide
BEFORE YOU OPERATE THE DISPLAY
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1400:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE3240S
High Contrast 3000:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE4340S
High Contrast 4000:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE4840S
High Contrast 1200:1 (Typical) / Brightness 350cd/m
2
(Typical) : ProLite LE5540S
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 10W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® XP/Vista/7/8/8.1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm, 200mm×200mm) Compliant :
ProLite LE3240S
VESA Mounting Standard (200mm×200mm, 400mm×400mm) Compliant :
ProLite LE4340S / ProLite LE4840S
VESA Mounting Standard (400mm×200mm, 400mm×400mm) Compliant :
ProLite LE5540S

ENGLISH
BEFORE YOU OPERATE THE DISPLAY 7
UNPACKING : ProLite LE5540S
Before unpacking your display, prepare a stable, level, and clean surface near a wall outlet.
Set the LCD display box in an upright position and open from the top of the box before removing
the top cushions.
Remove the carton holders.
Remove the top cushion and take
the accessories box and the display out.
CAUTION
Moving the display requires at least two people. If not, it may drop
and could result in a serious injury.
When moving/shipping the display, please hold by the carton holders.
Pinch and Pull the Knob.

ENGLISH
8 BEFORE YOU OPERATE THE DISPLAY
CONTROLS AND CONNECTORS : DISPLAY
<Back Controller>
<Front>
Power Button
MUTE Mute Button
INPUT Enter / Input
Select Button
+ + Button
- - Button
Up Button
Down Button
MENU Menu Button
Power Indicator
Green
Lighting : Normal Operation
Flash : Power Management (
ECO Mode
:
Normal
)
* If there is no input signal from the computer and passes
for 10 minutes.
Orange
If turn off the Power Button on the Remote Control and the
Back Controller. Power Management (ECO Mode : Normal)
Red
If turn off the Power Button on the Remote Control and
the Back Controller. Power Management (ECO Mode :
Low power standby)
Off Power Off
Remote Sensor Remote Sensor
MUTE INPUT MENU
<Remote sensor and power indicator - location>
1. Pull down the lens to improve remote control performance and ensure good visibility of the power
status diode.
2. Push up the lens before mounting the display for video wall application.
3. Pull/Push the lens until hearing the click sound.
Push right to hide the lens Push left to extend the lens

ENGLISH
BEFORE YOU OPERATE THE DISPLAY 9
<Back>
AC IN AC-INLET AC Connector( : Alternating current) (AC-IN)
AC SWITCH
(ON) / (OFF)
MAIN
POWER Main Power Switch
PC AUDIO IN Mini Jack Audio Connector
HDMI IN HDMI HDMI Connector
DVI IN DVI-D
24pin DVI-D 24pin Connector
VGA IN D-SUB mini
15pin VGA(D-sub) mini 15pin Connector
COMPONENT
VIDEO
(VIDEO IN)
RCA G/B/R Component Video Connector
AUDIO IN RCA L/R Audio Connector
AUDIO OUT RCA L/R Audio output Connector
IR OUT IR IR Connector
IR IN IR IR Connector
LAN RJ45 RJ45 Connector
RS232C OUT Mini Jack RS232C Connector
RS232C IN Mini Jack RS232C Connector
USB USB USB Connector
Keyhole for
Security Lock Keyhole for Security Lock
SPEAKERS Speakers
Y Pb Pr
LRL R INOUTRJ45IN USBOUT

ENGLISH
10 BEFORE YOU OPERATE THE DISPLAY
INSTALLATION
CAUTION
Follow the manual instructions for the type of mount you have selected. Refer all servicing to
qualifi ed service personnel.
Moving the display requires at least two people.
Before installing, please make sure the wall is strong enough to hold the necessary weight of the
display and the mount.
[WALL MOUNTING]
When using the wall mounting, consideration of thickness of the mounting stage needs to be taken.
Tighten the M4/M6* Screw with washer which “L” length is 10mm to fasten the display. Using
a screw longer than this may cause electric shock or damage because it may contact with the
electrical parts inside the display.
CAUTION
L
Mounting Stage Screw
Chassis
* M4 Screw : ProLite LE3240S
M6 Screw : ProLite LE4340S / ProLite LE4840S / ProLite LE5540S
[ROTATING THE DISPLAY]
A
A
Not Available
It is designed to be compatible in landscape mode.
A
A
Landscape
Available
Power indicator

ENGLISH
BEFORE YOU OPERATE THE DISPLAY 11
CONTROLS AND CONNECTORS : REMOTE CONTROL
Turns the display ON and OFF.
[PLAY]
Control playback of media fi les.
: Play
: Stop
:
Pause
: Quick-Return
: Fast-Forward
INPUT
Selects the source.
Press or button to select from
USB, Network, HDMI, DVI, YPbPr,
AV or VGA. Press [OK] button to
confi rm and exit.
TV
LIST
CH - / +
Not available on this model.
HOME Opens the display’s on-screen
menu systems.
Navigates through submenus and
settings.
: Up Button
: Down Button
: Left Button
:
Right Button
OK
Confi rms your selection or save changes.
ADJUST
Selects the direct menu.
PC mode : Sound style, Audio out,
Picture format, Picture shift
Video mode : Picture Style, Sound
style, Audio out, Picture format,
Picture shift
BACK Returns to a previous menu or
closes the OSD Menu.
VOLUME - / +
VOLUME-: Decreases the sound
volume.
VOLUME+: Increases the sound
volume.
MUTE Turns on or off the mute function
when the Menu is not displayed.
COLOR
Select tasks or options.
NUMERIC Enter text for network setting.
FORMAT Change picture format.
INFO Provides source and resolution
information.
OPTIONS Access currently available options,
picture and sound menus.

ENGLISH
12 BEFORE YOU OPERATE THE DISPLAY
To use the remote control, insert the two dry batteries.
PREPARING THE REMOTE CONTROL
CAUTION
Do not use any other batteries other than those specifi ed in this manual for the Remote Control. Do
not insert old and new batteries together in the Remote Control. Make sure that the terminals match
the "+" and "-" indications in the battery compartment. Burst batteries or the electrolyte from these
batteries may cause stains, fi re or injury.
Slide back and remove the battery cover in the direction of the arrow.
Align and insert two AAA batteries according to their plus and minus ports (as indicated in the
remote control).
Replace the battery cover in the direction of the arrow and snap it back into place.
NOTE Replace with new batteries when the Remote Control does not work close to the display.
Use AAA dry batteries.
Operate the Remote Control by pointing it toward the Remote Sensor on the display.
Other manufacturers remote control will not work with this display. Use the provided
Remote Control ONLY.
Used batteries needed to follow the local rules to be discarded. (Suggestion: to dispose
of used batteries please follow correct policy as per your local regulations.)
Battery x 2

ENGLISH
BEFORE YOU OPERATE THE DISPLAY 13
BASIC OPERATION
Turning the display ON
The display is turned On and the Power Indicator turns to
Green when you press the button on the display or POWER
the Remote Control. The display is turned Off and the Power
Indicator turns to Orange when you press the button POWER
on the display or the Remote Control. Press again to turn On
the display.
NOTE
Even when using the power management mode or turning OFF
the Power Switch, the display will consume a small amount of
electricity. Disconnect the Power Cable from the power supply
whenever the display is not in use or during the night, to avoid
unnecessary power consumption.
[Remote Control]
Display the adjustment menu page
The menu page appears on the screen when you press the
MENU button on the display or the HOME button on the
Remote Control.
The menu page disappears when you press the
BACK
button on the Remote Control again.
[Display]
[Remote Control]
[Display]
UT T MENU
MUTE INPUT MENU

ENGLISH
14 BEFORE YOU OPERATE THE DISPLAY
Move the cursor horizontally
Select menu or setting, or perform the adjustment by pressing
the + / - button on the display or the / button on the
remote control while the menu page is displayed on the
screen.
Move the cursor vertically
Select adjustment by pressing the / button on the display
or the / button on the remote control while the menu page
is displayed on the screen.
[Remote Control]
[Display]
[Remote Control]
MUTE INPUT MENU
[Display]
MU E INPUT MENU

ENGLISH
BEFORE YOU OPERATE THE DISPLAY 15
Adjust the volume of sound
Press the + / - button on the display or the remote control
to adjust the volume of sound when the menu page is not
displayed on the screen.
Switch the input signal
This is activated when you successively press the INPUT
button on the display or the Remote Control.
[Remote Control]
[Display]
[Remote Control]
[Display]
MU E INPUT MENU
MUTE P UT MENU

ENGLISH
16 BEFORE YOU OPERATE THE DISPLAY
CONNECTING YOUR THE DISPLAY
Ensure that both the computer and the display are switched off .
Connect the computer to the display with the signal cable.
Connect the computer to the display with the RS-232C Cable.
Connect the Power Cable to the display fi rst and then to the power supply.
Turn on your display (Main Power Switch and Power Switch) and computer.
The signal cables used for connecting the computer and display may vary with the
type of computer used. An incorrect connection may cause serious damage to both
the display and the computer. The cable supplied with the display is for a standard
connector. If a special cable is required please contact your local iiyama dealer or
regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the Signal Cable.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
NOTE
Computer
AV Equipment
VGA(D-sub)Signal
Cable(Accessory)
DVI-D Cable (Accessory)
HDMI Cable (Not Included)
Power Cable (Accessory)
RS-232C Cable
(Accessory)
Audio Cable
(Not Included)

ENGLISH
BEFORE YOU OPERATE THE DISPLAY 17
[ Connection example with the peripheral device ]
CAUTION
Turn off the power switch and unplug
the display and peripherals before
connection to avoid electric shock or
damage.
NOTE
R e f e r t o t h e u s e r m a n u a l o f
peripherals at the same time.
Ens ure you h av e th e nec es s a r y
cables as required.
LRL R INOUTRJ45IN USBOUT
Y Pb Pr
Red
Blue
Green
Red
White
Red
White
PC
[RJ-45]
[RJ-45] ROUTER
INTERNET
[ To setup the network ]
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press HOME button on the remote control, then select Setup.
4. Select "Connect to network", then press OK button.
5. Follow the on-screen instructions to install the network.
6. Wait for this display to fi nd the network connection.
7. If you are prompted, agree to the “End User Licence Agreement”.
Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
NOTE

ENGLISH
18 BEFORE YOU OPERATE THE DISPLAY
Procedure for turning ON the Power Switch
Turn ON the display fi rst, and then the computer.
Signal Timing
Change to the desired signal timing listed on page 42: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD display complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the display to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The display Information File for iiyama displays may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com
Display Drivers are not required in most cases for Macintosh or Unix operating
systems. For further information, please contact your computer dealer fi rst for advice.
COMPUTER SETTING
NOTE

ENGLISH
20 OPERATING THE DISPLAY
Direct
Press the ADJUST button when Menu is not displayed.
Direct menu below appears.
PC input and Video input (HDMI, DVI, YPbPr, AV, VGA)
Sound Mode:
Access predefi ned sound settings.
Audio out:
Adjust audio output volume.
Picture format:
Change the picture format.
Picture shift:
Move the position of the picture.
Video input only (HDMI(Video), YPbPr, AV)
Picture Mode:
Select a predefi ned picture settings.
* Available for Remote Control only.

ENGLISH
OPERATING THE DISPLAY 21
ADJUSTMENT MENU CONTENTS
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness*1
Contrast Too dull
Too intense
Picture Mode*
2
Custom
Vivid
Movie
Standard
Displays a picture on a screen set by Image Settings
adjustments.
For displaying outdoor scenery images.
For movie and video environment.
For general windows environment and the display
default setting.
Sharpness*2Too soft
Too sharp
Colour Too week
Too strong
Backlight Brightness of back light is reduced.
Picture
Hue
Off
LOW
MIDDLE
HIGH
Purplish
Greenish
Noise Reduction is turned off .
Electronic image noise caused by diff erent
media players is reduced.
Electronic image noise caused by diff erent
media players is reduced more than Low.
Electronic image noise caused by diff erent
media players is reduced more than Mid.
*1
Adjust the Brightness when you are using the display in a dark room and feel the screen is too bright.
*2 Only HDMI(Video), YPbPr and AV input.
Natural
Photo For photo environment.
Reset Picture setting will be restored to factory-preset data.
Advanced Noise
reduction*
2
Direct
Energy saving
Reset
Backlight
Contrast
Brightness
Hue
Colour
Sharpness
Advanced
Foramat and edges
Picture
Sound
General settings
Network settings
Picture Mode
Vivid
Natural
Standard
Movie
Photo
Energy saving
Custom
For displaying natural images.
To display the image while reducing power.
Yes
No Return to Menu.
Produktspezifikationen
Marke: | Iiyama |
Kategorie: | LCD-Monitore |
Modell: | ProLite LE4262S |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Iiyama ProLite LE4262S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung LCD-Monitore Iiyama

14 Oktober 2024

14 Oktober 2024

13 Oktober 2024

13 Oktober 2024

12 Oktober 2024

10 Oktober 2024

7 Oktober 2024

13 Juli 2024

13 Juli 2024

12 Juli 2024
Bedienungsanleitung LCD-Monitore
- LCD-Monitore Samsung
- LCD-Monitore Acer
- LCD-Monitore Asus
- LCD-Monitore BenQ
- LCD-Monitore Philips
- LCD-Monitore LG
- LCD-Monitore NEC
- LCD-Monitore Fujitsu
- LCD-Monitore AOC
- LCD-Monitore AG Neovo
- LCD-Monitore DGM
- LCD-Monitore Eizo
- LCD-Monitore LaCie
- LCD-Monitore Planar
- LCD-Monitore DoubleSight
- LCD-Monitore Gateway
Neueste Bedienungsanleitung für -Kategorien-

14 Oktober 2024

14 Oktober 2024

13 Oktober 2024

13 Oktober 2024

13 Oktober 2024

13 Oktober 2024

13 Oktober 2024

11 Oktober 2024

11 Oktober 2024

11 Oktober 2024