IGS Audio Rubber Bands Bedienungsanleitung
IGS Audio
Effektmaschine
Rubber Bands
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IGS Audio Rubber Bands (8 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/8
RUBBER BANDS
USER'S MANUAL
IGS Audio Igor Sobczyk
3 Maja 76d, 41-400 Mysłowice, Poland
e-mail: igs@o2.pl ph: +48 601 597 592
www.igsaudio.com
Please read all of the following instructions and save them
for later reference before attempting to connect the unit to the mains.
EARTH
This unit is connected via its power cord to the mains safety earth.
NEVER OPERATE THE UNIT WITH THIS EARTH CONNECTION REMOVED.
COVERS
DO NOT remove the covers. Refer servicing to qualified personnel only.
VOLTAGE
Unit is set to operate only at the voltage indicated on the PSU unit
CHECK that the correct voltage is selected before connecting the AC mains supply.
FUSES
CHECK that the fuse fitted is the correct type for the local mains voltage.
ALWAYS replace fuse with the correct type.
MOISTURE
DO NOT expose the unit to rain or moisture. If the unit
should become so exposed REMOVE the mains power immediately.
CABLES
PROTECT the mains power cord from damage though impact or abrasion.
HEAT
ALWAYS site the unit away from sources of heat including direct sunlight and ensure
adequate ventilation around the unit.
Copyright 2014. All rights reserved.
The information in this document is subject to change without notice.
IGS Audio makes no warranty of any kind with respect to the material in this document
and shall not be liable for errors contained herein or for incidental or consequential
damages related to the use of the material.
Manual revision: 1.0 (December 2014)
Thank you for buying this IGS Audio product.
Please read the information provided below very carefully before using your IGS unit.
Unpacking
Your RUBBER BANDS has been carefully and meticulously tested and inspected before
dispatch. Please check for any signs of transit damage. If any signs of mishandling are found
please notify the carrier and your dealer immediately.
Your RUBBER BANDS packing should contain an RUBBER BANDS with IGS Audio tag, an
RUBBER BANDS POWER SUPPLY unit and this manual with the Warranty and
RoHS/CE/WEEE Declaration attached.
Compatibility and Power
The RUBBER BANDS uses dedicated external POWER SUPPLY unit and can't operate without
it.
Never attempt to replace the external PSU with the third party one or one made by yourself.
There is a fuse socket near the power cable connector on the PSU. Ensure that the correct fuse
is being used before plugging the TUBECORE to the power outlet.
➔For US area (115V) use 2A Slow Blow (Type T).
➔For Europe and rest of the world area (230V) use 1A Slow Blow (Type T).
Always check the voltage selector on the PSU to ensure that it is set to the proper voltage
available in your country.
Connecting the PSU to the RUBBER BANDS is fairly easy, thanks to industrial standard 7-pin
metal connector and long, heavy duty cable.
Always power up the PSU first and then use power switch at the front of the RUBBER
BANDS. Follow the reverse order when switching off.
Produktspezifikationen
| Marke: | IGS Audio |
| Kategorie: | Effektmaschine |
| Modell: | Rubber Bands |
Brauchst du Hilfe?
Wenn Sie Hilfe mit IGS Audio Rubber Bands benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine IGS Audio
2 August 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine König
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine BeamZ
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine HQ Power
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
25 September 2024