Ignis AKS 338/IX Kookplaat Bedienungsanleitung
Ignis
Kochfelder
AKS 338/IX Kookplaat
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Ignis AKS 338/IX Kookplaat (4 Seiten) in der Kategorie Kochfelder. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
YOUR SAFETY AND THE SAFETY OF OTHERS ARE VERY IMPORTANT
This manual and the appliance itself provide important safety messages, to be read and observed at all times.
All Safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what
can happen if the instructions are not followed.
- The appliance must be disconnected from the power supply before carrying out any installation work.
- Installation and maintenance must be carried out by a qualified technician, in compliance with the manufacturer’s
instructions and local safety regulations. Do not repair or replace any part of the appliance unless specifically stated in
the user manual.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance.
The electrical and gas connections must comply with local regulations.
- When the hob is installed, provide a multi-pole circuit breaker with a contact
separation of at least 3 mm, that provides full disconnection.
- Regulations require that the appliance is grounded.
- The power cable must be long enough for connecting the appliance, once fitted in
its housing, to the power supply
- Use only flexible or rigid metal hose for gas connection.
- If necessary, the electrical power cable must be replaced exclusively with a power
cable having identical characteristics to the original supplied by manufacturer. This
operation must be performed by a qualified electrician.
- The manufacturer cannot be held responsible for any injury to persons or animals
or damage to property arising from failure to comply with these requirements.
- Do not use multiple plug adapters or extension cords.
- Do not pull the power cable to disconnect it from the electrical supply.
- The electrical components must not be accessible to the user after installation.
- Do not touch the appliance with any wet part of the body and do not operate it
when barefoot.
- This hob (class 3) is designed solely for private household use for cooking food. Do not
use this appliance as a space heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the hob. The Manufacturer declines all
responsibility for inappropriate use or incorrect setting of the controls.
- The appliance and its accessible parts become hot during use. Care should be taken
to avoid touching heating elements. Children less than 8 years of age shall be kept
away unless continuously supervised. This appliance can be used by children aged
from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. They shall not play with the appliance. Cleaning
and user maintenance shall not be made by children supervision.
- The use of a gas appliance produces heat and humidity in the room. Make sure the
room is well-ventilated, or install an extractor hood with exhaust duct.
- Domestic animals should be kept away from the appliance.
- In case of prolonged use, additional ventilation may be necessary (by opening a
window or increasing the hood extraction speed).
- After use, make sure the knobs are in off position and close the main gas supply
cock or the gas cylinder valve.
- Overheated oils and fats catch fire easily. Always remain vigilant when cooking
foods rich in fat, oil or alcohol (e.g. rum, cognac, wine).
- Keep the packaging materials out of the reach of children.
- Before cleaning or maintenance wait for hob to cool down.
- Unattended cooking on a hob with fat or oil can be dangerous and may result in
fire. NEVER try to extinguish a fire with water, but switch off the appliance and then
cover flame e.g. with a lid or a fire blanket.
- Danger of fire: do not store items on the cooking surfaces.
After unpacking the hob, make sure that it has not been damaged during transport. In the event of problems, contact the
dealer or your nearest After-sales Service.
These instructions are only valid for the countries whose symbols is given on the data plate (under the hob).
TECHNICAL INFORMATION FOR THE INSTALLER
• This product can be embedded in a worktop 20 to 50 mm thick.
• If there is no oven beneath the hob, insert a separator panel that has a surface at least equal to the opening in the
work surface. This panel, that has to close completely the cutout in order to avoid any contact with the bottom
part of the hob, must be positioned at a maximum distance of 150 mm below the upper surface of the work
surface but, in no case less than 20 mm from the bottom of the hob. In the case that you intend to install an oven
beneath the hob, make sure that it is manufactured by Whirlpool and equipped with a cooling system. The
manufacturer declines all liability if another brand oven is installed beneath the hob.
• Before installation, make sure that:
- the local gas delivery conditions (nature and pressure) are compatible with the settings of the hob (see the
rating plate and injector table);
- the outer surfaces of the furniture or appliances adjacent to the hob are heat resistant according to local regulations;
- this appliance is not connected to a fume exhaust device. It shall be installed in accordance with current installation
regulations. Particular attention shall be given to the relevant requirements regarding ventilation;
- combustion products are discharged outdoors through specific hoods or wall and/or window mounted electrical fans.
IMPORTANT SAFETY INSTRUCTIONS
This is the safety alert symbol, pertaining to safety, which alerts users to potential hazards to themselves and others.
All safety messages will follow the safety alert symbol and either the terms:
DANGER Indicates a hazardous situation which, if not avoided, will cause serious injury.
WARNING Indicates a hazardous situation which, if not avoided, could cause serious injury.
WARNING If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage or injury.
What to do if you smell gas:
- Do not try to light any appliance.
- Do not touch any electrical switch.
- Do not use any phone in your building.
- Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
- If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency or the gas supplier.
- Use appliance in well ventilated rooms only.
SAVE THESE INSTRUCTIONS
INSTALLATION
5019 619 01568 Manufacturer: Whirlpool Europe S.r.l. Viale G. Borghi, 27 21025 Comerio (VA) ITALY
EN BUILT-IN GAS HOB INSTRUCTIONS
FR
BE
(Apply the label from warranty here)
NL
GAS CONNECTION
ELECTRICAL CONNECTION
IMPORTANT: the data relevant to the voltage and power absorption are indicated on the rating plate.
ASSEMBLY
ADJUSTMENT TO DIFFERENT TYPES OF GAS
If the appliance is intended to operate with a different gas from the gas type stated on the rating plate and information label
on the top of the hob, change the injectors.
Remove the information label and keep it with the instructions booklet.
Use pressure regulators suitable for the gas pressure indicated in the Instruction.
• The gas nozzles must be changed by After Sales Service or a qualified technician.
• Nozzles not supplied with the appliance must be ordered from After Sales Service.
• Adjust the minimum setting of the taps.
NOTE: when liquid petroleum gas is used (G30/G31), the minimum gas setting screw must be tightened as far as it will
go.
IMPORTANT: should you experience difficulty in turning the burners knobs, please contact the After Sales Service for
the replacement of the burner tap if found to be faulty.
REPLACING THE INJECTORS (see the injector table in the Instruction)
ADJUSTING MINIMUM GAS SETTING OF TAPS
WARNING This operation must be performed by a qualified technician.
• The gas supply system must comply with local regulations.
• You can find specific local regulations for some countries in the paragraph
“Reference to Local Regulations”. If no information concerning your Country
is given, please ask details to your Installer.
• The connection of the hob to the gas pipe network or gas cylinder must be
made by means of a rigid copper or steel pipe with fittings complying with
local regulations, or by means of a continuous-surface stainless steel hose
complying with local regulations. Interpose gasket (B) in the elbow
connection.The maximum length of the hose is 2 m.
• FOR BELGIUM ONLY: It is necessary to replace the elbow connection (A) on
the appliance, with the one supplied (if present).
IMPORTANT: if a stainless steel hose is used, it must be installed so as not to
touch any mobile part of the furniture. It must pass through an area where
there are no obstructions and where it is possible to inspect it on all its
length.
• After connection to the gas supply, check for leaks with soapy water. Light
up the burners and turn the knobs from max position to minimum
position to check flame stability.
WARNING This operation must be performed by a qualified technician.
WARNING • The electrical connections must comply
with local regulations.
• The earthing of this appliance is
compulsory by law.
• Do not use an extension cord.
After having cleaned the perimeter surface,
apply the supplied gasket to the hob as shown
in the figure.
Position the hob in the worktop opening made respecting the dimensions indicated in the Instruction.
NOTE: the power supply cable must be long enough to permit its upward extraction.
To secure the hob, use the brackets (A) provided with it. Fit the brackets into the relevant bores shown by the arrow and
fasten them by means of their screws in accordance with the thickness of the worktop (see the following figures).
L
N
Earth
(yellow/green)
WARNING This operation must be performed by a qualified technician.
• Remove grids (A).
• Extract burners (B).
• Using a socket spanner of the appropriate size unscrew
the injector (C), unscrew the injector to be replaced.
• Replace it with the injector suitable for the new type of
gas.
• Re-assemble the injector in (D).
• If you have a multiple crown burner use side spanner to
replace the injector (E).
Before installing the hob, remember to affix the gas
calibration plate supplied with the injectors in such a way
that it covers the existing information relating to gas
calibration.
To ensure that the minimum setting is correctly adjusted, remove the knob and
proceed as follows:
• tighten screw to reduce the flame height (-);
• loosen screw to increase the flame height (+).
The adjustment must be performed with the tap in minimum gas setting position (small
flame) .
• The primary air of the burners does not need to be adjusted.
• At this stage, light up the burners and turn the knobs from max position to
minimum position to check flame stability.
Upon completion of adjustment, reseal using sealing wax or an equivalent material.
Top 20 mm
Top 30-50 mm
REFERENCE TO LOCAL REGULATIONS
The installation and maintenance of the appliance must be carried out by a qualified skilled technician in accordance with the
regulations in force, and in particular:
• Decree of 2 August 1977
Technical and Safety Rules applicable to fuel gas and liquefied hydrocarbon installations located within residential buildings
and outbuildings.
• Standard DTU P 45 - 204
Gas installations (formerly DTU no. 61-1 - Gas installations April 1982 + supplement no. 1 of July 1984).
• Departmental Health Regulations
For appliances connected to the mains electricity supply.
• Standard NF C 15-100
Low-voltage electrical installations - Standards.
REFERENCE TO LOCAL REGULATIONS
The appliance is supplied with a 1/2” threaded conical end to be connected to the gas supply (according to
ISO regulations ISO 7/1 RP 1/2).
The connection must be effected in accordance with standard NBN D 51-003 using rigid piping or in accordance with
specifications sheet A.R.G.B./03 using flexible tubing.
The appliance must be installed complete with an AGB-approved stop valve.
AFTER-SALES SERVICE
TROUBLESHOOTING GUIDE
If the hob will not operate correctly, before calling the After-Sales Service, refer to the Troubleshooting Guide to determine
the problem.
1. The burner fails to ignite or the flame is not even
Check that:
• The gas or electrical supplies are not shut off and especially that the gas supply tap is open.
• The gas cylinder (liquid gas) is not empty.
• The burner openings are not clogged.
• The plug end is not dirty.
• All the burner parts have been positioned correctly.
• There are no draughts near the hob.
2. The burner does not stay lit
Check that:
• When lighting the burner, the knob has been pressed for enough time to activate the protection device.
• The burner openings are not clogged near the thermocouple.
• The end of the safety device is not dirty.
• The minimum gas setting is correct (see relevant paragraph).
3. The containers are not stable
Check that:
• The bottom of the container is perfectly flat
• The container is centered on the burner.
• The grids have not been exchanged or positioned incorrectly.
If after the above checks the fault still occurs, get in touch with the nearest After Sales Service.
CLEANING THE HOB SURFACE
• All the enamelled and glass parts should be cleaned with warm water and neutral solution.
• Stainless steel surfaces may be stained by calcareous water or aggressive detergents if left in contact for too long. Any
food spills (water, sauce, coffee, etc.) should be wiped away before they dry.
• Clean with warm water and neutral detergent, and then dry with a soft cloth or chamois. Remove baked-on dirt with
specific cleaners for stainless steel surfaces.
NOTE: clean stainless steel only with soft cloth or sponge.
• Do not use abrasive or corrosive products, chlorine-based cleaners or pan scourers.
• Do not use steam cleaning appliances.
• Do not use flammable products.
• Do not leave acid or alkaline substances, such as vinegar, mustard, salt, sugar or lemon juice on the hob.
CLEANING THE HOB PARTS
• Grids, burner caps and burners can be removed to be cleaned.
• Clean them by hand with warm water and non-abrasive detergent, removing any food residues and checking that none
of the burner openings is clogged.
• Rinse and dry
• Refit burners and burner caps correctly in the respective housings.
• When replacing the grids, make sure that the panstand area is aligned with the burner.
• Models equipped with electrical ignition plugs and safety device require thorough cleaning of the plug end in order to
ensure correct operation. Check these items frequently, and if necessary, clean them with a damp cloth. Any baked-on
food should be removed with a toothpick or needle.
NOTE: to avoid damaging the electric ignition device, do not use it when the burners are not in their housing.
• This hob has been designed, constructed and marketed in compliance with:
- safety requirements of “Gas” Directive 2009/142/EC (ex: EEC 90/396);
- safety objectives of the “Low Voltage” Directive 2006/95/CE (which replaces 73/23/CEE and subsequent
amendments);
- protection requirements of EEC Directive “EMC” 2004/108/EC;
• This hob is suitable for contact with foodstuffs and complies with EEC (CE) Regulation n. 1935/2004.
Disposal of packing material
The packing material is 100% recyclable and is marked with the recycle symbol ( ). The various parts of the packing must
therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.
Scrapping the product
- This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment
(WEEE).
- By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
- The symbol on the product or on the accompanying documentation indicates that it should not be treated as
domestic waste but must be taken to an appropriate collection centre for the recycling of electrical and electronic
equipment.
Before calling the After-Sales Service, make sure you can give the following information:
- type of fault or problem;
- exact model (written on the label affixed to the instruction/warranty);
- service number that follows the word SERVICE on the rating plate under the hob and
on the label affixed to instruction/warranty;
- your complete address and phone number.
If any repairs are required, please contact an authorised After-Sales Service, as indicated in
the warranty.
WARNING Disconnect power before servicing.
FR
NL
DECLARATION OF CONFORMITY
SAFEGUARDING THE ENVIRONMENT
PRODUCT DESCRIPTION
Produktspezifikationen
| Marke: | Ignis |
| Kategorie: | Kochfelder |
| Modell: | AKS 338/IX Kookplaat |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ignis AKS 338/IX Kookplaat benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kochfelder Ignis
5 Juli 2024
5 Juli 2024
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Kochfelder
- Kochfelder Samsung
- Kochfelder Infiniton
- Kochfelder Emerio
- Kochfelder Nedis
- Kochfelder Philips
- Kochfelder SilverCrest
- Kochfelder Hanseatic
- Kochfelder Panasonic
- Kochfelder Bestron
- Kochfelder Guzzanti
- Kochfelder Princess
- Kochfelder Trisa
- Kochfelder Bosch
- Kochfelder AEG
- Kochfelder Ardes
- Kochfelder Siemens
- Kochfelder ATAG
- Kochfelder Bauknecht
- Kochfelder Bifinett
- Kochfelder Concept
- Kochfelder Electrolux
- Kochfelder Ellrona
- Kochfelder Fulgor
- Kochfelder Gaggenau
- Kochfelder Gorenje
- Kochfelder Jata
- Kochfelder Klarstein
- Kochfelder Koenic
- Kochfelder KĂĽppersbusch
- Kochfelder Miele
- Kochfelder Rommelsbacher
- Kochfelder Severin
- Kochfelder Teka
- Kochfelder Unold
- Kochfelder Whirlpool
- Kochfelder Bomann
- Kochfelder First Austria
- Kochfelder Korona
- Kochfelder Listo
- Kochfelder IKEA
- Kochfelder Mesko
- Kochfelder Telefunken
- Kochfelder Mestic
- Kochfelder Amica
- Kochfelder BEKO
- Kochfelder Blaupunkt
- Kochfelder Boretti
- Kochfelder Grundig
- Kochfelder Inventum
- Kochfelder KitchenAid
- Kochfelder Palson
- Kochfelder Primo
- Kochfelder Sharp
- Kochfelder Smeg
- Kochfelder Tomado
- Kochfelder Wilfa
- Kochfelder Ardo
- Kochfelder Ariston
- Kochfelder Atlantic
- Kochfelder Balay
- Kochfelder Blomberg
- Kochfelder Scandomestic
- Kochfelder Brandt
- Kochfelder Candy
- Kochfelder Constructa
- Kochfelder CorberĂł
- Kochfelder Elektra Bregenz
- Kochfelder Exquisit
- Kochfelder GE
- Kochfelder Haier
- Kochfelder Hisense
- Kochfelder Hoover
- Kochfelder Hotpoint-Ariston
- Kochfelder Bartscher
- Kochfelder Indesit
- Kochfelder Juno
- Kochfelder Juno-Electrolux
- Kochfelder Kelvinator
- Kochfelder Bertazzoni
- Kochfelder Maytag
- Kochfelder Neff
- Kochfelder Nordmende
- Kochfelder PKM
- Kochfelder Privileg
- Kochfelder Progress
- Kochfelder Saivod
- Kochfelder ETNA
- Kochfelder Scholtès
- Kochfelder SIBIR
- Kochfelder Junker
- Kochfelder Zanker
- Kochfelder Zanussi
- Kochfelder KKT Kolbe
- Kochfelder Zerowatt
- Kochfelder Leonard
- Kochfelder Oranier
- Kochfelder Pelgrim
- Kochfelder Philco
- Kochfelder Rosières
- Kochfelder Valberg
- Kochfelder Viva
- Kochfelder Kernau
- Kochfelder Franke
- Kochfelder Novy
- Kochfelder Airforce
- Kochfelder Cata
- Kochfelder Cylinda
- Kochfelder De Dietrich
- Kochfelder Falmec
- Kochfelder Nodor
- Kochfelder Logik
- Kochfelder Amana
- Kochfelder Euromaid
- Kochfelder Omega
- Kochfelder Lamona
- Kochfelder Meireles
- Kochfelder Tricity Bendix
- Kochfelder BORA
- Kochfelder Jaksch
- Kochfelder Kitchen & Home
- Kochfelder Master Kitchen
- Kochfelder Bellini
- Kochfelder Orbegozo
- Kochfelder CDA
- Kochfelder Saturn
- Kochfelder Magic Chef
- Kochfelder Currys Essentials
- Kochfelder Summit
- Kochfelder John Lewis
- Kochfelder Malloca
- Kochfelder Montpellier
- Kochfelder Ramtons
- Kochfelder New World
- Kochfelder Modern Maid
- Kochfelder Igenix
Neueste Bedienungsanleitung fĂĽr -Kategorien-
14 Juli 2024
7 Juli 2024
7 Juli 2024
7 Juli 2024
7 Juli 2024
7 Juli 2024
7 Juli 2024
7 Juli 2024