IGet HGNVK68004 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IGet HGNVK68004 (18 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/18
Made in China
Helpdesk / Technical Support
www.iget.eu/cs/helpdesk-centrum-cs
https://helpdesk.intelek.cz/
SMART HD
SECURITY SYSTEM
Quick Installation Guide - EN
Model: HGNVK-68002 / 68004 / 68006
NVR
Setup
Contents
Package Contents
STEP 1: Initial Setup
STEP 2: Setting Up the NVR
STEP 3: Connecting with Homeguardsafe
STEP 4: Installing the Cameras
Pairing the Camera
Charging the Power Pack
Troubleshooting
2
3
4
5
7
11
12
13
1
Package Contents
Rechargeable Power Packs
5V 2A Adapter Power Pack( )
User Manuals
1080p Wireless NVR
USB Mouse
1m Network Cable
Camera Antennas
Mounting Kit
Warning Stickers
Wire-Free Cameras
12V 2A Adapter (Recorder)
CD with Software
2
Before you begin, you will need to prepare the wire-free cameras and power packs.
Peel off the label covering the contacts on each Power PLEASE REMOVE
Pack. Insert the charged Power Packs into each camera base. Push up until
the Power Pack ‘clicks’ into place.
Note: Power packs come fully charged with no need for initial charging.
Twist the adjustment ring near the camera base counterclockwise to loosen
and reposition each camera as shown to the below. Connect one of the
white antennas to each camera.
STEP 1 Initial Setup
Adjustment ring
1 2
3
Setting Up the NVR
Next, you must set up the NVR and connect it to your network.
Connect the NVR to your router using the included
Ethernet cable.
Connect the included power adapter to the NVR.
Wait a few minutes for the system to start up.
This guide describes basic setup of the NVR only. This installation
is intended for users who wish to monitor their system using the
free Homeguardsafe app on their smartphone or tablet.
You may choose to use the NVR interface to control your wire-free
security system. Connect the included USB mouse to one of the
USB ports labelled Mouse/Backup, and connect a monitor using
a HDMI cable (not included). See the included Quick Connection
Guide for details.
Optional: Full NVR Setup
1 2
STEP 2
4
Connecting with Homeguardsafe
Tap the icon to launch the app.Homeguardsafe Tap to open the menu.
Tap “Device List +
Scan the QR code on the back of your NVR using the camera on your
smartphone or tablet.
1 2
3
For the best experience, download the Homeguardsafe app for
your smartphone by scanning the QR code below or searching
for Homeguardsafe in the App Store or Google play.
iOS - iPhone & iPad Android - Phone & Pad
STEP 3
5
Your system will appear on the homescreen of the app. Tap each channel
with a camera connected then tap the play button to stream live video.
Note: If you do not see video from one or more cameras, ensure you have removed the PLEASE
REMOVE label from the power pack. If the issue persists, see the Troubleshooting” section on the back
of this document.
Enter your NVR’s user name (default: admin) and password (default: empty).
Tap .“Save”
Note: Please remember to change the password, refer to Quick Connection Guide for details. If you
have change the device password, you should also change the password on app and connect again.
4 5
6
Installing the Cameras
Installation Tips
The wire-free cameras use a Passive InfraRed sensor to ensure video is only recorded when motion is detected.(PIR)
Follow the tips below for more accurate motion detection and to optimize battery life:
See images to the right for ideal setup. It is recommended to place your camera at least 7ft/2.1m above the
ground and angle it slightly downward toward the monitoring area, excluding any busy areas (e.g., sidewalks or
roadways).
Ensure the camera image is free of obstructions i.e., tree branches .( )
Position the camera no more than 20ft/6.1m away from the area you wish to monitor.
See the “Optimizing Motion Detection” section in Quick Connection Guide to customize motion settings for each
camera on your system.
Ensure you have configured the active area for motion detection so that only areas of interest are selected. See
the “Optimizing Motion Detection” section for details.
For best performance, position the camera so that objects of interest will move from side-to-side across the
camera image, rather than moving towards or away from the camera.
Install the camera within range of the recorder.
This camera is weather resistant for outdoor use IP66 . Installation in a sheltered location is recommended.( )
Battery life will vary based on temperature, settings and number of events.
STEP 4
7
To install your cameras:
Follow the instructions below to secure the cameras. It is recommended that you refer to the “ ” section to help you select good mounting locations.Installation Tips
Set the mounting bracket in the desired mounting position. Mark holes through
the mounting bracket (shown as orange Xs on the below).
Note:
To make camera installation easier, you can adhere included bracket location stickers to the place you
would like to install your cameras.
Secure the bracket to the mounting surface with the included mounting
screws ×4 . Make sure all screws are fastened tightly.( )
Note:
Insert the included drywall anchors if you are mounting the camera onto drywall.
The hole at the top of the mounting bracket will be used in step , once the camera is attached
to the mounting plate.
1
Drill holes where marked for the mounting screws using the included drill bit.
2
3
5
8
Lower the camera base onto the mounting bracket so the 2 tabs in the
mounting bracket lock into the 2 slots in the camera base.
Insert the security screw through the fasteners on the top of the camera
base and mounting bracket to secure the camera to the mounting bracket.
Tighten using the included screwdriver.
4 5
9
Twist the adjustment ring near the camera base counterclockwise to loosen
and reposition the camera. Hold the camera in the desired angle and tighten
the adjustment ring completely to secure the camera in place.
OPTIONAL: Tighten the pre-installed locking screw on the base of the
Power Pack using the included screwdriver.
Note: You will need to loosen the locking screw to remove the Power Pack in the future.
67
Attention: This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal,
and indicates that the camera filter is working.
10
1 2
Pairing the Camera
Your cameras should be paired to the recorder and ready to use out of the package. If a camera becomes unpaired, or if you have purchased a wire-free add-on camera
( )max. 6 cameras per system , follow the instructions below.
From Live view, tap any free channel you would like to pair a camera to
( )marked with a icon . Tap “PAIR”. A timer for 30 seconds appears.
Press and hold the pair button on the back of the camera for 3 seconds.
Note: A Pairing successful message should appear on screen. If you do not see this message, repeat
the steps above.
Press 3S
11
Charging the Power Pack
Use the included power adapter to charge the power pack. Connect the power adapter to the micro USB port on the power pack. The LED indicator on the power pack
shows you the charging status must be plugged in .( )
Note: The Power Pack LED flashes red while outside the safe charging temperature of 32-113°F . In this state, the camera remains powered up, but the Power Pack will not charge outside the safe temperature range.(0-45°C)
Power Pack Charge Time
2-cell
3-cell
Approx. 6 hours
Approx. 8 hours
LED Color Meaning
Fully charged
Currently charging
Green
Red
12
Troubleshooting
Problem Solution
No picture / signal
Battery life is too short
Picture is dropping
Ensure the camera is connected to a compatible NVR.
Ensure the Power Pack is properly inserted into the camera base.
Ensure you have removed the PLEASE REMOVE label from the Power Pack.
Connect the power adapter to your Power Pack to ensure the Power Pack is charged. The LED indicator on the
power pack glows green for full charge, red for less than full charge.
Remove obstructions between the NVR and camera. Materials such as brick, concrete and wood can significantly
impact the wireless signal strength.
Try repositioning the camera, NVR, or both to improve the reception.
Ensure the camera is not pointing at a high-traffic area. Position the camera so it only captures areas of interest with
no high-traffic areas e.g., a busy sidewalk or roadway visible in the image.( )
Live video is being viewed too frequently. Viewing live video often will impact battery performance.
Ensure you have set an active area and distance setting for motion detection to reduce false alarms. See Optimizing
Motion Detection” in Quick Connection Guide for details.
Battery life will vary based on temperature, settings and number of events.
Move the camera closer to the NVR.
Try repositioning the camera, NVR, or both to improve the reception.
13
Problem Solution
Picture is or has become choppy
Camera is not detecting motion
Picture is too bright
Night vision is not working
Picture is not clear
Bright spot in video when
viewing at night
The picture may become choppy when experiencing a lower frame rate e.g., 6 frames per second vs. a higher(
15 frames per second . This may be related to signal strength or the camera’s resolution.)
Ensure the camera resolution is set to 720p using the Homeguardsafe app or the NVR.
Move the camera closer to the NVR.
Remove obstructions between the NVR and camera.
Your camera may be too far away from the area of interest. Try to keep the camera within 20ft/6.1 of the area
you want to monitor.
Review the “Installation Tips” and “Optimizing Motion Detection” sections to ensure your camera is installed in
an optimal location and motion detection is properly configured.
Ensure your camera isn’t pointed directly at a source of light e.g., sun or spot light .( )
Move your camera to a different location.
The night vision activates when light levels drop. The area may have too much light.
Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean cloth.
Too much environmental interference will affect picture clarity. Move your camera to a different location.
Night vision reflects when pointing a camera through a window. Move the camera to a different location.
14
Warranty & Support
All the products sold are covered by 24 months warranty from the date of invoice. Warranty instructions:
1. Please contact us when the product is caused by its own fault within 2 year warranty.
2. Please mail us your written warranty card as soon as possible after purchasing our products so that we can repair or replace this product to its original operation
condition. Or the company will not deal with it.
3. Please write the truth on the warranty card.
4. Paid for repairing as follows:
A. Equipment failure caused by human operation
B. Equipment failure caused by not conforming to the using environment
C. No warranty card
D. Warranty expired
Note: Please keep the warranty card for the better service.
For technical support, please contact us support@homeguardworld.com or https://helpdesk.intelek.cz
24
Product model:
Product serial number:
Purchase date:
User name:
Contact person:
Telephone:


Produktspezifikationen

Marke: IGet
Kategorie: Überwachungskamera
Modell: HGNVK68004

Brauchst du Hilfe?

Wenn Sie Hilfe mit IGet HGNVK68004 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Überwachungskamera IGet

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-