IFM VSE953 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM VSE953 (21 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
Operating instructions
Diagnostic electronics
with Modbus TCP interface for vibration sensors
VSE953
11371835 / 0003 / 2021
GB
VSE953 Diagnostic electronics
2
Contents
1 Safety instructions............................................................ 3
2 Preliminary note.............................................................. 4
2.1 Symbols used........................................................... 4
2.2 Warnings used.......................................................... 4
3 Intended use ................................................................ 5
4 Device functions.............................................................. 6
4.1 Function description...................................................... 7
4.2 Firmware .............................................................. 7
5 Mounting ................................................................... 8
5.1 Emission .............................................................. 8
5.2 Sources of interference ................................................... 8
5.3 Cable routing........................................................... 8
5.4 Installation instructions.................................................... 8
6 Electrical connection .......................................................... 9
6.1 Wiring................................................................. 9
6.2 Connection of the sensors................................................. 10
7 Modbus TCP ................................................................ 11
7.1 Properties.............................................................. 11
7.2 Data model............................................................. 11
7.3 Register............................................................... 14
7.3.1 Device identification register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.3.2 Register mapping input (FC4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.4 Input function code....................................................... 14
7.5 Register mapping output (FC3, FC6 and FC16). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7.6 Output function code ..................................................... 15
7.7 Exception response...................................................... 15
7.8 Factory setting VSE953 - Modbus TCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7.9 General factory setting.................................................... 15
7.10 Note for programmers .................................................... 15
7.11 Parameter setting........................................................ 16
8 Operating and display elements.................................................. 17
8.1 Operating states of the network (NET) and mode (MOD) status LED . . . . . . . . . . . . . . . . 17
9 Maintenance, repair and disposal ................................................ 18
Diagnostic electronics VSE953
3
1 Safety instructions
• The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system creator undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
• Read this document before setting up the product and keep it during the entire service life.
• The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
• Only use the product for its intended purpose ( Intended use).Ò
• If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
• The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
• Protect units and cables against damage.
GB


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: VSE953

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM VSE953 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-