IFM UGR503 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM UGR503 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Operating instructions
Ultrasonic retro-reflective sensor without IO-Link
UGR502
UGR503
80237717 / 00 07 / 2018
UK
2
1 Preliminary note
1.1 Explanation of symbols
â–ºInstructions
> Reaction, result
→Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose (→ Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• Protect units and cables against damage.
3 Functions and features
Ultrasonic sensor for the detection of objects.
3
UK
4 Installation
3
4
21
5
â–ºSecure the unit to a bracket
1/2: Status LED (yellow), setting aid
and output indication
3: Echo LED (green), is on when
reector is detected
4: Teach button
5: Reector
The functional specifications refer to a mild steel reflector defined by ifm at
maximum range and with an edge length of 300 mm. The minimum size of
the reflector depends on the size of the object.
With ultrasonic retro-reflective sensors adhere to the minimum distances to
the reflector (→ Technical data sheet).
For units with metal housing (according to UL 508):
â–ºObserve a minimum distance of 12.7 mm between the sensor and non-
insulated live parts.
For further information please refer to www.ifm.com
→ General information about installation and operation.
5 Electrical connection
â–ºDisconnect power.
â–ºConnect the unit:
BK: Black
BN: Brown
BU: Blue
BN1
BK4
BU3
L+
L
OUT
OUT: Switching output
Colours to DIN EN 60947-5-2


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: UGR503

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM UGR503 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-