IFM PA9020 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM PA9020 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Installation Instructions
Electronic pressure sensor
PA30xx / PA90xx UK
704753 / 03 06 / 2019
2
1 Symbols used
â–ºInstruction
Important note
Non-compliance can result in malfunction or interference.
Information
Supplementary note.
2 Safety instructions
• The device described is a subcomponent for integration into a system.
- The manufacturer of the system is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the opera-
tor, the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions.
• Only use the product for its intended purpose (→ Functions and features).
• Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator.
• Protect units and cables against damage.
3
UK
3 Function and features
The pressure sensor detects the system pressure and converts it into an analog
output signal.
• 4 ... 20 mA (PA30xx) / 0 ... 10 V (PA90xx)
3.1 Applications
• Type of pressure: relative pressure
Order no. Measuring range Permissible
overload pressure
Bursting
pressure
bar PSI bar PSI bar PSI
PAxx20 0...400 0...5 800 600 8 700 1 000 14 500
PAxx21* 0...250 0...3 625 400 5 800 850 12 300
PAxx22 0...100 0...1 450 300 4 350 650 9 400
PAxx23 0...25 0...363 150 2 175 350 5 075
PAxx24 0...10 0...145 75 1 087 150 2 175
PAxx26 0..2.5 0...36.3 20 290 50 725
PAxx27 0...1 0...14.5 10 145 30 450
PAxx28 0...0.25 0...3.63 6 84 30 450
PAxx29 -1...0 -14.5...0 10 145 30 450
PAxx60 0...600 0...8 700 800 11 600 1 200 17 400
MPa = bar ÷ 10 / kPa = bar × 100
*Values for PA3221:
Permissible overload pressure = 600 bar; bursting pressure = 1000 bar.
Static and dynamic overpressures exceeding the indicated overload pres-
sure are to be avoided by taking appropriate measures.
The indicated bursting pressure must not be exceeded. Even if the bur-
sting pressure is exceeded only for a short time, the unit can be destroyed.
NOTE: Risk of injury!
Use in gases at pressures > 25 bar only after contacting the manufacturer ifm.
The versions 250 bar and 400 bar are supplied with a pressure relief
mechanism and an integrated damping device to avoid any risk of injury in
case of bursting when the bursting pressure is exceeded.


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: PA9020

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM PA9020 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-