IFM IG5952 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM IG5952 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Installation Instructions
Inductive sensor
with optical setting aid
701228 / 03 11 / 2007
UK
UK
UK
UK
UK
2
Function and features
This inductive sensor detects metals without contact and indicates their presence by
providing a switched signal.
The nominal sensing range (Sn) can be seen in the type designation on the type
label on the unit; operating distance (Sa) 0 ... 0,81 x Sn; (values based on standard
measurement with mild steel; a shorter sensing range for other metals).
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the indications
on the type label. The unit can be used as normally open ( ) or as normally
closed ( ).
Installation
Mounting by means of a mounting device.
Adjust the unit. Adjustment is correct
when the red LED light. Secure does not
by means of the nuts provided so that it
cannot work loose.
Non-flush installation.
21
c
LED yellow / red
d
Target
Open space around the sensing face when mounted in metal:
3 x Sn
D
D
D
2 x Sn
3
UK
Minimum distance when several sensors of the same type are mounted:
2 x DD D
8 x Sn
Operation
Check the safe functioning of the sensor. Display by LEDs:
The yellow LED is lit when the output is switched.
The red LED is lit in case of faulty adjustment.
output function
LED yellow
No object in the detection range.
LED red
LED yellow
Safe detection of the object.
LED red
LED yellow Unsafe detection of the object
(readjust the unit).
LED red
LED yellow Uncertain function: predamping of the
unit by metal deposits or insufficient
open space around the active face;
(clean the active face or readjust the unit).
LED red
The operation of the sensor is maintenance-free.
For perfect functioning make sure that:
the sensing face and the open space are kept free of metal deposits and foreign
bodies, particularly for installation with the sensing face facing upwards;
EMC: The unit conforms to the requirements of EN 60947-5-2.
•
•
•
•


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: IG5952

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM IG5952 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-