IFM EVC192 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM EVC192 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Owners manual
Free 5 year guarantee
Register your guarantee at
www.dysonairblade.com
2
THANK YOU FOR CHOOSING TO BUY A
DYSON AIRBLADE TAP HAND DRYER
DYSON CUSTOMER CARE
Your hand dryer is covered for 5 years from the date of purchase, subject to the terms of
the limited guarantee.
Register your guarantee now at www.dysonairblade.com
If you have any questions about your hand dryer, call the Dyson Helpline with your serial
number and details of where and when you bought the unit.
Note your serial number here for future reference.
Your serial number can be found on the bot tom right hand corner of the backplate of the
hand dr yer. It is also on the large information sticker which can be found around the tap
when the unit is unpacked.
This illustration is for example purposes only.
WARNING
A comprehensive installation guide is enclosed with the hand dryer packaging. This
contains detailed information on the correct installation of the appliance, which MUST
be adhered to completely, including routing of electrical cables. Damage caused by
incorrect installation is not covered by your guarantee. Installation and servicing MUST be
by a qualified electrician and plumber.
The instructions in this manual and the installation guide must be followed completely, as
failure to do so may result in incorrect operation, damage to propert y and/or personal
injury. It is recommended that an isolation valve is fitted with this produc t during
installation.
Dyson will not be held liable for any damage to property or personal injury, or any loss
of business or revenue, if you, your staff, your installer or ser vice engineers have not
followed the instructions given in this manual and the installation guide.
IMPORTANT SAFETY INSTRUCTIONS
BEFORE INSTALLING OR USING THIS UNIT READ ALL INSTRUCTIONS
AND CAUTIONARY MARKINGS IN THIS MANUAL AND THE
INSTALLATION GUIDE
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
1. This unit is not intended for use by persons (including children) with reduced
physical, sensor y or reasoning capabilities, or lack of experience and knowledge,
unless they have been given super vision or instruction concerning use of the unit
by a person responsible for their safety.
2. Do not allow the hand dryer to be used for any purpose other than washing
and drying hands. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3. Before servicing, switch the power off at the service panel. Ensure the switch is
locked to prevent the power from being switched on accidentally. If the means of
switching off the power cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
4. Children should be super vised to ensure that they do not play with the unit.
5. Do not use any jetwash equipment for cleaning on or near this unit.
CAUTION
Your hand dryer should be located indoors. Operating temperature range 0°C
(32°F) to 40°C (104°F). To reduce the risk of fire or electric shock, do not expose
the internal mechanisms/components of this unit to moisture.
READ AND SAVE THESE INSTRUCTIONS
3
LOOKING AFTER YOUR HAND DRYER
WARNING
This product is not to be used in sinks where a plug is fitted. Before engaging
the water flow ensure that the plughole is clear of any obstructions and that
water can drain freely.
HOW TO USE
1. Place your hands beneath the centre of the tap and it will start the water flow
automatically for as long as the hands remain in place.
2. Place your hands to either side of the centre tap to activate the hand dryer,
creating sheets of air to scrape water from your hands.
3. Move your hands backwards and forwards slowly through the air, turning them
over so both back and front are exposed to the airflow.
TROUBLESHOOTING GUIDE
Problem Action
The hand dryer fails to start. Check fuse/circuit breaker is working and that
the power and water supply are connected.
Ensure the cleaning cap is removed and that the
sensors are clean and unobstructed.
Turn the machine on and off.
The hand dryer is turning on and off erratically. Ensure sensors are clean.
Check that the sensor cable from the tap is
securely connected.
The hand dryer sometimes cuts out when in use
but resumes operation after a period of time.
Check the air inlet is clean and free of dust.
If the air inlet is dusty simply remove dust.
Ensure that the air inlet is free from obstructions
and has sufficient clearance (see installation
instructions).
The dry time of the hand dryer has increased.
The air flow from the hand dryer is running
hotter than usual.
Inspect the inlet grill for dust and remove.
Inspect filter and change if required.
Ensure that the hose is securely attached to the
base of the tap and no leaks are present.
Air is continuously running from the hand dryer. Ensure sensors are clean and free from any
obstructions
Problem Action
There is no air coming from the hand dryer. Check fuse/circuit breaker is working and that
the power is connected.
Ensure that the air hose is securely attached to
the base of the tap and no leaks are present.
Check that the sensor cable from the tap is
securely connected.
TAP
Problem Action
Water is continuously coming from the tap. Ensure sensors are clean and free from any
obstructions.
There is no water coming from the tap. Ensure that the power and water supplies are
turned on and that the isolation valve is open.
Ensure that the aerator is free from debris,
remove and clean / replace if necessary.
The water coming from the tap is overly hot
or cold.
Contact the Dyson Helpline.
If you have any further questions please contact the Dyson Helpline.
CLEANING
The hand dryer should be cleaned daily.
Follow these 2 simple steps to ensure the unit performs to its best and remains
hygienic. Using the wrong cleaning method or product may invalidate your
guarantee.
1. Fit the cleaning cap, and wipe all surfaces with a soft cloth and
non-abrasive cleaner.
2. Clean the air inlets on the base of the motor bucket REGULARLY.
GENERAL ADVICE
All cleaning chemicals should be used exactly as indicated by the
manufacturer’s instructions (including appropriate dilution).
If a cleaning product is left on the machine for too long, a film will form.
Any chemicals intended for use should first be tested on an inconspicuous area to
confirm suitability.


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: EVC192

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM EVC192 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-