IFM EC1451 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM EC1451 (20 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/20
Mounting and
installation instructions
Process- and dialogue module
PDM 360
CR1050
CR1051
CR1060
7390564 / 00 11 / 2014
UK
F1
esc
F6F2 F3 F4 F5
Process- and dialogue module PDM 360
2
Contents
1 Safety instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
2 Function and features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
2�1 Features at a glance� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
3 Programming � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
3�1 Setup and online help� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
4 Mounting� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
4�1 Mounting accessories� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
4�2 Seal/vibration absorber � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
4�3 Control cabinet mounting with mounting brackets (fixing set EC1453) � � � 7
4�4 Panel mounting with clips (snap-in set EC1452) � � � � � � � � � � � � � � � � � � � � 8
4�4�1 Removing the unit from the panel � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
4�5 Surface mounting with RAM® mount system (EC1410���EC1414) � � � � � � � 9
5 Electrical connection� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
5�1 General� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
5�2 Ethernet � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
5�3 M23 round connector (central plug) � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
5�4 Service interfaces (only for service operation) � � � � � � � � � � � � � � � � � � � � � �11
6 Maintenance, repair and disposal� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11
7 Technical data� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �11
7�1 CR1050 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
7�2 CR1051 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
7�3 CR1060 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18
UK
Process- and dialogue module PDM 360
3
1 Safety instructions
This description is part of the unit. It contains texts and drawings con-
cerning the correct handling of the module and must be read before
installation or use.
Observe the information of the description� Non-observance of the notes,
operation which is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of persons
and plant�
The instructions are for authorised persons according to the EMC and low
voltage guidelines� The process and dialogue modules must be installed and
commissioned by a skilled electrician (programmer or service technician)�
If the unit is not supplied by the mobile on-board system (12/24 V battery
operation) it must be ensured that the external voltage is generated and supplied
according to the criteria for safety extra-low voltage (SELV) as this is supplied
without further measures to the connected controller, the sensors, and the
actuators�
The wiring of all signals in connection with the SELV circuit of the unit must also
comply with the SELV criteria (safe extra-low voltage, safe electrical separation
from other electric circuits)
If the supplied SELV voltage has an external connection to ground (SELV
becomes PELV) the responsibility lies with the user and the respective national
regulations for installation must be complied with� All statements in these operating
instructions refer to the unit the SELV voltage of which is not grounded�
The connectors may only be supplied with the signals indicated in the technical
data or on the unit label and only the approved accessories of ifm electronic gmbh
may be connected�
The unit can be operated within a wide temperature range according to the
technical specification indicated below� Due to the additional self-heating the
housing walls can have high perceptible temperatures when touched in hot
environments�
In case of malfunctions or uncertainties please contact the manufacturer
Tampering with the unit can lead to considerable risks for the safety of persons
and plant� It is not permitted and leads to the exclusion of any liability and warranty
claims�
Electromagnetic compatibility
This is a class A installation� It can cause radio interference in domestic areas� In
this case the operator is requested to take appropriate measures�

Produktspezifikationen

Marke: IFM
Kategorie: niet gecategoriseerd
Modell: EC1451

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM EC1451 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd IFM

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-