IFM E2M261 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM E2M261 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Installation instructions
E2M261
11313037 / 00 04 / 2020
UK
2
Items supplied
– 1 bag with connector parts
– 1 x shrinkable sleeve, black
– 5 x shrinkable sleeve, red
Overview of the supplied connector parts
1
2
3
4
6
5
7
1. Front seal
2. Connector housing / coupling ring
3. Female insert with solder connections
4. Cable clamp
5. Assembled O-ring
6. Seal for cable gland in 2 sizes (1 x
4-6 mm, 1 x 6-8 mm)
7. Pressing screw
i
The outer diameter of the cable must match the inner diameter of the seal.
â–º Only use 1 seal for the assembly.
UK
3
Assembly
â–º Strip 20 mm from the cable
20 mm
â–º Strip 5 mm from the screening.
5 15 mm
â–º Fold back the screening and thread on the pressure screw, seal and cable
clamp.
20 mm
â–º Fold the screening back over the cable
clamp.
Cable insulation:
1. Strip coax cable.
2. Loosen the screening from the coax cable
and roll it together.
3. Slide the black shrinkable sleeve over the
screening and shrink it.
4. Slide the red shrinkable sleeve of the
screening and the coax cable and shrink
it.
â–º Solder the cable ends to the female insert.
â–º Cover the soldering points with 4 shrinkable sleeves and shrink them.
â–º Press the connector together.
Using the shrinkable sleeves is necessary in order to insulate the cables and
to avoid short circuits.


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: E2M261

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM E2M261 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-