IFM CR0200 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IFM CR0200 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Mounting and installation
instructions
ExtendedController R 360
CR0200
ENGLISH
R
Sachnr. 7390427 / 02 09 / 2015
E CXTENDED ONTROLLER CR0200
PAGE 2
Safety instructions
This description is part of the unit. It contains texts and drawings
concerning the correct handling of the controller and must be
read before installation or use.
Observe the information of the description. Non-observance of the notes,
operation which is not in accordance with use as prescribed below, wrong
installation or handling can result in serious harm concerning the safety of
persons and plant.
The instructions are for authorised persons according to the EMC and low
voltage guidelines. The controllers must be installed and commissioned by a
skilled electrician (programmer or service technician).
If the unit is not supplied by the mobile on-board system (12/24 V battery
operation) it must be ensured that the external voltage is generated and sup-
plied according to the criteria for safety extra-low voltage (SELV) as this is sup-
plied without further measures to the connected controller, the sensors, and
the actuators.
The wiring of all signals in connection with the SELV circuit of the unit must
also comply with the SELV criteria (safe extra-low voltage, safe electrical sepa-
ration from other electric circuits).
If the supplied SELV voltage has an external connection to ground (SELV
becomes PELV) the responsibility lies with the user and the respective national
regulations for installation must be complied with. All statements in these
operating instructions refer to the unit the SELV voltage of which is not
grounded.
The terminals may only be supplied with the signals indicated in the technical
data or on the unit label and only the approved accessories of ifm electronic
gmbh may be connected.
The unit can be operated within a wide temperature range according to the
technical specification indicated below. Due to the additional self-heating the
housing walls can have high perceptible temperatures when touched in hot
environments.
In case of malfunctions or uncertainties please contact the manufacturer.
Tampering with the unit can lead to considerable risks for the safety of per-
sons and plant. It is not permitted and leads to the exclusion of any liability
and warranty claims.
Contents
1. Function and features page 3
2. Programming page 3
Programming choices page 4
3. Mounting page 6
4. Electrical connection page 8
5. Maintenance, repair and disposal page 10
6. Declaration of conformity page 10
Technical data (data sheets 1...6)
Dimensions, mechanics, electronics page 11
Operating status (status LED) page 12
Test standards and regulations page 12
Characteristics of the inputs/outputs page 13
Wiring page 15
1. Function and features
The freely programmable controllers of the "ExtendedController R 360" series are
rated for use under difficult conditions (e.g. extended temperature range, strong
vibration, intensive EMC interference).
They are thus suited for direct mounting into machines in mobile and rugged
applications. Due to their specification the inputs and outputs are especially rated
for this use. Integrated hardware and software functions (operating system) offer
high protection of the machine.
The controllers can be used as CANopen master.
The controllers "ExtendedController R 360" are not approved for safety-rel-
evant tasks in the field of safety of persons.
2. Programming
The application software can be easily created by the user with the ifm program-
ming system CODESYS according to IEC 61131-3.
In addition to the programming system the complete system manual is required
to program the controller.
If this manual is not available, please contact one of the ifm branch offices over-
leaf for your free copy. The system manual (pdf format) can also be downloaded
from the web.
www.ifm.com ➔Data sheet direct Additional data➔CR0200 ➔
The user is responsible for the safe functioning of the application programs
which he creates himself. If necessary, he must additionally obtain an
approval according to the corresponding national regulations by the corre-
sponding testing and supervisory organisations.
ENGLISH
E CXTENDED ONTROLLER CR0200
PAGE 3


Produktspezifikationen

Marke: IFM
Kategorie: Nicht kategorisiert
Modell: CR0200

Brauchst du Hilfe?

Wenn Sie Hilfe mit IFM CR0200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert IFM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-