IDance Cube Nano Bedienungsanleitung

IDance Ladestation/Dockingstation Cube Nano

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr IDance Cube Nano (7 Seiten) in der Kategorie Ladestation/Dockingstation. Dieser Bedienungsanleitung war fĂŒr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/7
User Manual
WHAT'S IN THE BOX
OVERVIEW
1. iDance CN2
2. Instruction Manual
The iDance CN2 is a Wireless all-in-one mini portable speaker with built-in
lighting, re-chargeable battery, AUX-input and stereo Bluetooth wireless audio
up to 10 meters. Only few simple steps to pair your device!!
The CN2 is perfect for bedroom, house / pool / yard party. Take your sound
with you on the go!!
Thank you, and congratulations on your choice of iDance’s CN2 !
Contents
WARNING WARNING: TO REDUC E THE RISK OF FIRE OR SHOCK,
DO NOT EXPOSE THIS PRODU CT TO RAIN OR MOISTURE
The exclamation mark inside an equilateral triangle is intended to alert user of the
presence of the important operating and maintenance (servicing) instructions in
the literature accompanying the product.
The lightning flash with arrowhead symbol inside an equilateral triangle is
intended to alert User of the presence of un-insulated “hazardous voltage” within
the product’s enclosure, which may be of sufficient magnitude to induce a risk of
electric shock to persons
NOTES:
Please do not attempt to open the back cover or power adapter as opening or removing
the covers may expose you to dangerous voltage or other hazards, and it will also cause
the restricted servicing to be disabled: There are no user servicing components inside.
NOTES:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the
Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
NOTES:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
4. Consult the dealer or an experienced radio/TV technician for assistance.
CAU TION: TO REDUCE THE RISK OF FIRE OR SHOCK, DO
NOT REMOVE COVER OR BAC K. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL
Class II equipment symbol
This symbol indicates that
the unit has a double system.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety of the polarized of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Portable Cart Warning
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture does not operate normally, or has been dropped.
15. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
16. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
17. The MAINS plugs used as the disconnect device, which shall remain readily operable.
FEATURES
Fig.1
CONTROL LOCATION
1. DISCO BALL
For different color LED light show.
2. Mic-IN 3.5mm Jack
Connect 3.5mm mini jack to this port to sing or make voice announcement with CN2.
3. AUX In (Line Input / Audio Input) 3.5MM Input Jack
Connect a music device (MP3 player etc.) to this socket with a 3.5mm mini jack audio
cable to play through CN2.
4. Battery Charging indicator:
Insert micro USB cable to this port and connect to USB port for charging, the indicator
will turn red. The indicator will be light OFF after fully charged.
5. MICRO USB JACK
Connect the micro USB cable to charging the built-in battery.
6. Power, LED ON / OFF
Slide this switch to ON for turning on the CN2,
Slide to LED to turn CN2 ON with activated LED light show
GENERAL OPERATIONS
Connect to external adapter or computer USB port
Connect micro USB plug of USB cable to main unit micro USB jack and plug the other to computer USB output port or external
adapter output port.
Charging Battery
1. Charging the built-in battery by connecting to USB power for 10-12 hours prior to first use.
2. When the built-in battery is being charged, the charging indicator light red.
3. If the charging indicator turn off when the built-in battery is fully charged.
4. Please charge to CN2 when battery power is low.
Battery Safety Notes:
1. To prolong the life of a rechargeable battery, it is recommended to completely discharge it before fully charging it again.
2. Do not dispose of built-in battery in fire, battery may be explode or leak.
3. Do not open the built-in battery may be explode.
Connecting Bluetooth to your Smartphone I Tablet
1. Slide the Power LED ON.OFF switch to ON to turn on CN2
2. On your smartphone / Tablet, turn on Bluetooth and enable device scanning.
3. When CN2 shows on the Bluetooth scan, select it to connect it to your device.
4. When both devices are successfully connected, you are ready to play music wirelessly from your device.
5. Press the PLAY button of external Bluetooth device to start music playback.
6. Press the NEXT / PREV (BLUETOOTH) of external Bluetooth device to switch between music tracks.
7. Hold the STAND BY button to reconnect other Bluetooth device.
SPECIFICATIONS
Bluetooth wireless stereo audio streaming
Support A2DP Proles for most smart phones / laptops
Aux In input (3.5 mm Stereo Mini Jack)
Microphone input (3.5 mm Stereo Mini Jack)
Disco ball with Disco light effect
Micro USB jack for battery charging
Built-in lithium-ion re-chargeable battery
1
2
3
4
6
5
Specifications are typical, individual units might vary. They are subject to continuous improvement without notice and without
incurring any obligation.
DC IN Power DC 5V , 1A
Built-In Battery 3.7V , 1200 mAh
SOUND SOURCE INPUT Bluetooth, Aux in,
Total Harmonic Distortion Below 10% at Standard Output
Signal to Noise Ratio Over 41dB
Master Power Output 5W
This product meets the essential requirements of Directive 1999/5/EC.
http://www.idanceaudio.com/documentation/declarationofconformity/ ENGLISH
CARACTÉRISTIQUES
Fig.1
EMPLACEMENT DES COMMANDES
1. BOULE DISCO
Pour jeu de lumiÚre LED de différentes couleurs.
2. Mic-IN (prise d'entrée micro 3,5 mm)
Branchez une mini fiche 3,5 mm dans cette prise pour chanter ou faire une annonce
vocale avec CN2.
3. EntrĂ©e Auxiliaire (entrĂ©e haut-niveau/entrĂ©e audio) prise d’entrĂ©e 3,5 mm
Connectez un appareil audio (lecteur MP3, etc.) Ă  cette prise avec un mini cĂąble audio
3,5 mm pour Ă©couter via CN2.
4. TĂ©moin de charge de la batterie Lorsqu’un cĂąble micro USB est branchĂ© dans ce port
de charge, le tĂ©moin devient rouge. Le tĂ©moin s’éteint une fois la charge terminĂ©e.
5. Port micro USB
Branchez un cùble micro USB dans ce port pour charger la batterie intégrée.
6. Commutateur alimentation-Allumer/Éteindre le jeu de lumiùre
Positionnez ce commutateur sur ON pour allumer CN2, le positionner sur LED pour
allumer CN2 avec le jeu de lumiĂšre.
UTILISATION GÉNÉRALE
Connecter l’enceinte à un adaptateur externe ou à un port USB d'ordinateur
Branchez le connecteur micro USB d’un cĂąble USB au port micro USB de l'unitĂ© et l'autre Ă  un port USB d’un ordinateur ou d’un
adaptateur externe.
Charge de la batterie
1. Chargez la batterie intĂ©grĂ©e en branchant l’alimentation au port USB pendant 10-12 heures avant la premiĂšre utilisation.
2. Lorsque la batterie est en cours de charge, le témoin s'allume en rouge.
3. Le témoin s'éteint dÚs que la batterie est complÚtement chargée.
4. Il faut recharge l’enceinte CN2 dùs que la batterie devient faible.
Informations de sécurité concernant la batterie :
1. Pour prolonger la durĂ©e de vie d’une batterie rechargeable, il est recommandĂ© de la dĂ©charger Ă  fond avant de la recharger
complĂštement.
2. Ne jetez pas la batterie intégrée au feu, elle pourrait exploser ou présenter des fuites.
3. N'ouvrez pas la batterie intégrée, elle pourrait exploser.
Connexion Bluetooth Ă  votre smartphone/Tablette
1. Positionnez le commutateur alimentation-Allumer/Éteindre le jeu de lumiùre sur ON pour allumer CN2.
2. Activez la fonction Bluetooth de votre smartphone/tablette, et activez la recherche d'appareils.
3. SĂ©lectionnez CN2 lorsqu’il apparaĂźt dans les rĂ©sultats de recherche Bluetooth et le connecter Ă  votre appareil.
4. Lorsque les deux appareils sont connectés correctement, vous pouvez écouter de la musique sans fil à partir de votre appareil.
5. Appuyez sur le bouton LIRE de l’appareil Bluetooth externe pour lancer la lecture de musique.
6. Appuyez sur le bouton SUIVANT/PRÉCÉDENT (BLUETOOTH) de l’appareil Bluetooth externe pour basculer entre les morceaux.
7. Maintenez appuyée la touche VEILLE pour connecter un autre appareil Bluetooth.
SPECIFICATIONS
Diffusion audio Bluetooth stéréo sans l
Prise en charge des prols A2DP pour la plupart des smartphones/ordinateurs portables
Entrée auxiliaire (Mini prise stéréo 3,5 mm)
Entrée micro (mini prise stéréo 3,5 mm)
Boule disco avec jeu de lumiĂšres
Connecteur micro-USB pour recharger la batterie
Batterie au lithium-ion rechargeable intégrée
1
23
4
6
5
Les spĂ©cications sont typiques, les unitĂ©s individuelles peuvent varier. Elles sont soumises Ă  l’amĂ©lioration continue sans prĂ©avis et sans
aucune obligation.
Alimentation DC 5V , 1A
Batterie intégrée 3.7V , 1200 mAh
Entrée audio Bluetooth, Aux in,
Total distorsion harmonique Au dessous de 10% en sortie standard
Puissance de sortie MASTER 5W
FRANÇAIS

Produktspezifikationen

Marke: IDance
Kategorie: Ladestation/Dockingstation
Modell: Cube Nano

Brauchst du Hilfe?

Wenn Sie Hilfe mit IDance Cube Nano benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladestation/Dockingstation IDance

IDance

IDance Mini Blaster 2L Bedienungsanleitung

7 Oktober 2024
IDance

IDance Groove 216 Bedienungsanleitung

13 September 2024
IDance

IDance Sing Cube 100 Bedienungsanleitung

9 September 2024
IDance

IDance TNT-1 Bedienungsanleitung

2 September 2024
IDance

IDance Groove 980 Bedienungsanleitung

2 September 2024
IDance

IDance ACDC CLASSIC 3 Bedienungsanleitung

4 August 2024
IDance

IDance Party Ball 2 BB-10K Bedienungsanleitung

4 August 2024
IDance

IDance BT-1 Bedienungsanleitung

4 August 2024
IDance

IDance Cuty CA10 Bedienungsanleitung

3 August 2024
IDance

IDance Groove 320MK3 Bedienungsanleitung

3 August 2024

Bedienungsanleitung Ladestation/Dockingstation

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Polk

Polk BOOM Bit Bedienungsanleitung

16 Oktober 2024
Vorago

Vorago KSP-600 Bedienungsanleitung

8 Oktober 2024
Jam

Jam Splash Bedienungsanleitung

5 Oktober 2024
Jam

Jam Thrill HX-P320 Bedienungsanleitung

4 Oktober 2024
Aukey

Aukey SK-S1 Bedienungsanleitung

3 Oktober 2024
Rapoo

Rapoo A500 Bedienungsanleitung

2 Oktober 2024
Gembird

Gembird DD-U3M2 Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS02UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS01UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS04UF Bedienungsanleitung

1 Oktober 2024