Ibm eServer BladeCenter HS22V Bedienungsanleitung

Ibm Server eServer BladeCenter HS22V

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ibm eServer BladeCenter HS22V (22 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/22
High-performance blade server optimized for virtualization
Please see the Legal Information section for important notices and information. 1.
Product Guide
February 2011
IBM BladeCenter HS22V
Product Overview
CONTENTS
Product Overview 1
Selling Features 2
Key Features 4
Key Options 15
HS22V Images 16
HS22V Specifications 17
The Bottom Line 20
Server Comparison 21
For More Information 22
Legal Information 22
High density, high performance 2-socket blade server optimized for
virtualization
Suggested uses: Mainstream virtualization and memory-intensive HPC applications requiring
high memory density, outstanding performance, and enhanced power efficiency.
Today’s data center environment is tougher than ever. You’re looking to reduce IT cost,
complexity, space requirements, energy consumption and heat output, while increasing flexibility,
utilization and manageability through virtualization. Incorporating IBM X-Architecture
features,
the IBM® BladeCenter® HS22V blade server, combined with the various BladeCenter chassis,
can help you accomplish all of these goals.
Reducing an entire server into as little as .5U of rack space (i.e., up to 14 servers in 7U) does not
mean trading away features and capabilities for smaller size. Each HS22V blade server offers
features comparable to many 1U rack-optimized full-featured servers: The HS22V supports up to
two of the latest high-performance Intel6-core/4-core/2-core ® Xeon® 5600 series and 5500
series processors. The Xeon processors are designed with up to of shared cache and 12MB
leading-edge memory performance (up to , depending on processor model) to help 1333MHz
provide the computing power you require to match your business needs and growth The HS22V .
supports up to of double data rate III (288GB registered DDR3 ECC) (Error Checking and
Correcting) memory in DIMM slots, with optional 18 Chipkill
protection1, for high performance
and reliability. Selected models are planned for . NEBS-3/ETSI-compliance
The HS22V supports VMware vSphere Hypervisor (formerly ESXi) preloaded on a standard
USB flash drive. It operates in a diskless configuration, offers a smaller memory footprint,
extremely high performance, and stronger security, making getting a system up and running in a
virtualized environment faster and easier than ever before. The HS22V supports approximately
50% more average virtual machines (VMs) than the HS22. With up to 288GB of memory, the
HS22V is an outstanding choice for virtualization, in-memory databases, and memory-intensive
enterprise applications.
An integrated dual-port Gigabit Ethernet2 controller is standard, providing high-speed data
transfers and offering (TCP Offload Engine) support, and TOE load-balancing failover
capabilities. Via optional expansion cards, each blade can also connect to additional Ethernet,
10Gb Ethernet, Converged Network Adapter ( ), , ,CNA SAS Fibre Channel iSCSI, InfiniBand
™,
and other high-speed communication switches housed in the chassis. This blade is designed with
power management capability to provide the maximum uptime possible for your systems. In
extended thermal conditions or power brownouts, rather than shut down completely, or fail, the
HS22V automatically reduces the processor frequency to maintain acceptable thermal and power
levels.
All HS22V models offer impressive features at an equally impressive price, including up to two
1.8-inch fixed solid-state drives (SSDs) RAID-0/1 internal USB flash with support, and one
drive (for embedded hypervisor]. Additional direct-attach storage is available via the BladeCenter
S chassis. Moreover, the HS22V is for diskless operation, offering each blade server optimized
access to essentially unlimited external storage capacity via Fibre Channel, SAS, or iSCSI.
A single BladeCenter E BladeCenter H 14 hot-swappable or chassis supports up to 30mm-
wide HS22V blades in only (BladeCenter E) or (BladeCenter H) of rack space or up to 7U 9U 12
in the high-speed telecommunications chassis. In addition to the blade 12U BladeCenter HT
servers, these chassis also hold up to (BladeCenter E) or up to (BladeCenter H) 4 switches 10
or (BladeCenter HT) internally. The , designed for SMB and 8 switches/bridges BladeCenter S
mid-market customers, takes integration and affordability to a new level, combining up to hot-12
swap HDDs (with optional SAS card) and up to and . Not SAS/SATA 6 blade servers 4 switches
only can this save significant data center space (and therefore the cost of floor space and rack
hardware) compared to 1U servers, it also consolidates switches/bridges and cables for reduced
1 Chipkill protection on the HS22V requires x4 DIMMs; Chipkill protection is not available with x8 DIMMs.
2 Actual data transfer speed will vary and is often less than the maximum possible. Gigabit Ethernet transfer speed requires support on both
system and server, and appropriate network infrastructure.
®
High-performance blade server optimized for virtualization
Please see the Legal Information section for important notices and information. 2.
complexity and lower cabling costs, and it allows clients to manage everything in the solution as
one. Using a BladeCenter E chassis, up to HS22V servers ( processors) can be installed 84 168
in one rack; but the value of BladeCenter extends far beyond high industry-standard 42U
density data center environments.
The various BladeCenter chassis are designed to monitor environmental conditions in the chassis
and each blade and send alerts to the administrator Advanced standard features, such as . Active
Memory, , Predictive Failure Analysis, light path diagnostics hot-swap redundant hard
disk drives power supplies and blower modules Calibrated Vectored Cooling, with ; IPMI
2.0 highly secure remote power control text-console redirect over LAN support, including ; ,
next-generation BIOS ( ), an (upgradeable with a UEFI Advanced Management Module
redundant AMM), management software including IBM Systems Director IBM Systems
Director Active Energy Manager™ Remote Deployment Manager IBM ServerGuide. and
help maintain system availability with increased uptime.
If you need highly manageable, high-performance virtualization in a space- or power-constrained
environment, the HS22V is the ideal system.
Selling Features Price/Performance
There is an HS22V model to fit all budgets. The HS22V offers a choice of high-performance 6-core/4-
core/2-core Xeon processors with integrated memory controllers, clock rates from 1.6GHz to
3.6GHz, and from 3MB to 12MB of shared cache (processor-specific) of integrated Level 3 cache.
Xeon 5600 series processors offer up to 60% better performance
3 than the previous-generation 5500
series processors and up to 1,500% better performance than the single-core processors of a few
years ago that you may still be using.
Low-voltage processors draw less energy and produce less waste heat than higher-voltage
processors, thus helping to reduce data center energy costs. On a per-core basis, the standard 80W
processors are extremely economical, consuming as little as 13.33W per core. Some low-voltage
Xeon processors consume only10W per core (4-core 40W or 6-core 60W).
Up to 288GB of registered DDR3 ECC memory operates at 800MHz to 1333MHz (depending on
the system configuration), for high performance and wide memory bandwidth.
Run two DIMMs per memory channel (2DPC) at 1333MHz in specific 5600 series processor
configurations
Embedded virtualization (optional on all models) offers extremely high performance, enhanced
security, and a zero-gigabyte HDD footprint. (In other words, no mechanical HDD to fail.)
Solid state drives (SDDs) use only 2W of energy per drive, vs. 7-10W for 2.5-inch HDDs. This is as
much as 80% less energy than a HDD would use (with a corresponding reduction in heat output).
Low -voltage 1.35 volt memory draws up to 19% less power than 1.5V DIMMs.
Selected HS22V blade servers are planned for NEBS3/ETSI-compliance and feature long-life
availability. These blades are ideal for telecom or Next Generation Network (NGN) applications such
as IPTV, IP Multimedia Subsystem (IMS) and security.
The extremely high degree of integration in the various BladeCenter chassis reduces the need for
server components, replacing numerous fans, KVM and Ethernet cables, power supplies, external
switches and other components with fewer shared hot-swap/redundant components in the
BladeCenter chassis itself. This integration also can greatly reduce the amount of power consumed
and heat produced, relative to an equivalent number of 1U servers. This can significantly reduce a
data center power bill. The reduced data center footprint can also save on infrastructure cost.
The midplanes used in all chassis provide high-speed blade-to-blade, blade-to-switch-module
and module-to-module communications internally as well as externally. The midplanes used in
the BladeCenter H and BladeCenter HT chassis provide four 10Gb data channels to each blade,
and supports high-speed switch modules, including 4X InfiniBand and 10Gb Ethernet.
The various BladeCenter chassis use ultrahigh efficiency power supplies . Many industry-standard
servers use power supplies that are only 70-80% efficient at converting power from AC wall current
to the DC power used inside servers. BladeCenter power modules are up to 94% efficient (and meet
the 80 Plus® Platinum Standard). This helps save even more money, as more of the power input
you are paying for is used for processing, rather than released into the data center as waste heat that
requires even more energy to cool.
BladeCenter also reduces the number of parts required to run the system. Sharing fans, systems
management, floppy devices and media means fewer parts to buy and maintain, and fewer items that
can fail and bring the overall solution down.
Flexibility
The has the ability to grow with your application requirements, thanks to: HS22V
3 Based on Intel measurements.
High-performance blade server optimized for virtualization
Please see the Legal Information section for important notices and information. 3.
Up to two multi-core Xeon processors (up to twelve cores per server).
A choice of processor speeds from 1.6 to 3.6GHz, up to 12MB of shared cache, and a choice of
power draw from 40W to 130W.
A choice of memory speeds from 800MHz to 1066MHz or 1333MHz.
Up to 288GB of system memory in 18 DIMM slots.
Up to two internal hot-swap 1.8 -inch solid state drives, and access to terabytes of external storage
via the BladeCenter S chassis or IBM System Storage
® SAN and NAS storage devices. SSDs
consume only 10-20% of the energy required by 2.5-inch HDDs.
Two Gigabit Ethernet ports standard, plus optional 2-port or 4-port expansion cards or a
BladeCenter PCI Express I/O Expansion Unit 3 . In addition, the various BladeCenter chassis
offer a high degree of flexibility:
A 30mm HS22V blade server can be upgraded, via the PCI Express I/O Expansion Unit 3. This
expandability allows configurations that are 30mm or 60mm wide, with a variety of I/O options,
depending on need.
When installed in a BladeCenter H high-speed switch bay, the optional Multi-Switch Interconnect
Module doubles the number of Gigabit Ethernet and Fibre Channel connections to every blade in
the chassis (up to 8 or 12 ports, depending on the blade server).
Xeon processor-based HS22V blades can be used in the same chassis as Intel processor-based
HC10, HS12, HS20, HS21, HS21 XM HS22, , HS40, and HX5 blades; AMD Opteron processor-
based LS20, LS21, LS22, LS41 and LS42 blades; IBM PowerPC® processor-based JS20, JS21,
and JS22 blades; POWER6® processor-based JS12, JS23, and JS43 Express blades; POWER7®
processor-based PS700, PS701, and PS702 blades; Cell Broadband Engine™ processor-based
QS21; and IBM PowerXCell processor-based QS22 blades. Depending on the blade servers used,
the various BladeCenter chassis support Microsoft® Windows®, Linux®, Novell Netware, IBM AIX
®
IBM i, and Sun Solaris 10 operating systems in the same chassis.
Most HS/LS/JS/PS/QS blade servers ever released by IBM are supported in every BladeCenter
chassis ever released, going back to 20024. Every switch module released by IBM is equally
compatible. (Ask HP and Dell how far back their compatibility goes.)
A blade server has access to as many as 10 communication switches/bridges in a BladeCenter
H or 8 in a BladeCenter HT chassis. (Up to switches in a BladeCenter E, S, or T chassis.) And the 4
switches can be Ethernet, iSCSI, SAS, InfiniBand, Fibre Channel, or anything else designed and
ServerProven® for BladeCenter use. Switches, bridges and interface cards are currently available
from such vendors as Brocade, Cisco , Intel, QLogic, Voltaire, and others, in addition to IBM/BNT.
Manageability
The HS22V blade server includes an Integrated Management Module (IMM) to monitor server
availability, perform Predictive Failure Analysis, etc., and trigger IBM Systems Director alerts. The
IMM performs the functions of both the Baseboard Management Controller (BMC) of earlier systems,
and the Remote Supervisor Adapter II, as well as remote presence/cKVM.
Each BladeCenter chassis includes an Advanced Management Module to provide additional
systems management capabilities, including Web-based out-of-band control; virtual floppy and CD-
ROM support; latest OS failure screen capture; LDAP and SSL support; and remote redirection of
video, text, keyboard and mouse.
Integrated industry-standard Unified Extensible Firmware Interface (UEFI) next-generation BIOS.
New capabilities include:
Human readable event logs; no more beep codes
Complete setup solution by allowing adapter configuration function to be moved into UEFI
Complete out-of-band coverage by the Advance Settings Utility to simplify remote setup
Integrated industry-standard IPMI 2.0 support works with the IMM to alert IBM Systems Director to
anomalous environmental factors, such as voltage and thermal conditions. It also supports highly
secure remote power control.
Integrated Trusted Platform Module (TPM) 1.2 support.
IBM Systems Director Active Energy Manager, an IBM-exclusive, is designed to take
advantage of new system power management features, by monitoring actual power usage and
providing power consumption capping features. More accurate power usage data helps with data
center construction planning and the sizing of power and cooling needs, as well as allowing you to
use available power more efficiently.
The HS22V supports remote presence/concurrent KVM (cKVM) and concurrent media (cMedia)
4 Some older chassis may require power module and management module upgrades. But the chassis itself, as well as fan/blower modules
and other components, are fully compatible.


Produktspezifikationen

Marke: Ibm
Kategorie: Server
Modell: eServer BladeCenter HS22V

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ibm eServer BladeCenter HS22V benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Server Ibm

Bedienungsanleitung Server

Neueste Bedienungsanleitung für -Kategorien-