Ibiza Sound SA500 Bedienungsanleitung

Ibiza Sound Empfänger SA500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ibiza Sound SA500 (13 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/13
1
P
PO
OW
WE
ER
R
A
AM
MP
PL
LI
IF
FI
IE
ER
RS
S
SA500 SA1000 SA2000– –
INSTRUCTION MANUAL
MANUEL D’UTILISATION
BEDIENUNGSANLEITUNG
H ANDLEIDING
Imported from China by
LOTRONIC S.A.
Avenue Zénobe Gramme 9
B-1480 Saintes
2
IMPORTANT SAFETY INSTRUCTIONS
1) Read the manual prior to using this unit and keep it for future reference.
2) Adhere to all warnings and instructions marked on the unit and . contained in the manual
3) Don’t place the unit close to water, e.g. in a bathroom, near a wash tub, a swimming pool, etc.
4) The unit must match carriage and rack recommended by the manufacturer.
Sudden stops, great power and rough surface may cause combination turns over.
5) Keep away from heat sources such as radiator, stove and amplifier etc.
6) Operate the unit only with the rated power supply. Please ask your dealer or local power supply
company if you are not sure about your type of power supply. If the unit is operated with batteries or
other power supplies, please refer to this booklet.
7) Do not walk on or squeeze the power cord.
8) Clean this unit with a soft cloth. Prevent water and/or other liquids the housingto enter into .
9) Unplug the power cord if the unit is not used for a long time or during a thunderstorm to prevent
voltage surges to damage the inner circuitry.
10) Prevent objects s and liquid to enter into unit.
11) If one of the following happens, refer to qualified service personnel:
A) Power cord or plug a damaged; or
B) An object or liquid has entered into the unit; or
C) The unit has been exposed to rain ; or
D) do The unit esn’ t work; or
E) The unit has fallen or doesn’t work normally.
12) Repair ---Do not attempt to repair the unit yourself. All repairs must be carried out by a qualified
technician. The user is only allowed to perform manipulations, settings and controls specified in this
manual.
13) Ventilation --- Do not cover the ventilation openings to prevent overheating of the unit. Do not place
the unit on bed, blanket, sofa or similar soft surface. Do not place unit inside a bookcase, a closed
cupboard, etc.
14) Accessories---Not use parts that hare not recommended by the manufacturer in order to avoid
damage.
15) Auxiliary equipment ---Do not place this unit on unstable vehicle, shelf, tripod or table. It will cause
serious harm to child or adult if the unit falls down use the vehicle, shelf, tripod or table. Please
recommended by the manufacturer.
16) Spare parts---If the unit requires sspare part , use only spares recommended by the manufacturer and
that are in all aspects identical to the original parts. .
17) Safety check---After repairing, repairer must test the unit for security.
GB
3
CONTROLS
1. Power: Press this button to power ON/OFF the unit.
2. L Volume: Use this knob to adjust the volume of left channel of main speaker output
3. R Volume: Use this knob to adjust the volume of right channel of main speaker output.
SA500 & SA1000
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. 1/4” Line input: Use suitable jacks to connect the line signal source to the 1/4” line input of the amplifier.
4. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
5. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance
of each speaker must be 8ohms at least to protect the amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.
SA2000
1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.
2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.
3. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.
4. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.
Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance
of each speaker must be 8ohms at least to protect the amplifier.
5. LINK output: Connect the XLR input signal to another amplifier.
6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.

Produktspezifikationen

Marke: Ibiza Sound
Kategorie: Empfänger
Modell: SA500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ibiza Sound SA500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Ibiza Sound

Ibiza Sound

Ibiza Sound SA500 Bedienungsanleitung

19 Juli 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024