Hydra Kool KFM-SF-50-S Bedienungsanleitung

Hydra Kool Kühlschrank KFM-SF-50-S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hydra Kool KFM-SF-50-S (40 Seiten) in der Kategorie Kühlschrank. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
MVP GROUP CORPORATION
www.mvpgroupcorp.com
D
D
D
DO
O
O
OE
E
E
E
D O E
Compliant
KFM SERIES - INSTALLATION AND OPERATION MANUAL - V0
2 79
This page has been left blank intentionally.
5659 ROYALMOUNT AVE.
MONTREAL, QC H4P2P9
TEL: 514-737-9701 1-888-275-4538
FAX: 514-342-3854 1-877-453-8832
12000 BISCAYNE BLVD. STE 108
MIAMI, FL 33181
TEL: 786-600-4687 1-844-218-8477
FAX: 786-661-4100
sales@mvpgroupcorp.com www.mvpgroupcorp.com
78
8 Notes
3
INDEX
1 General information 5
1.1 Case description 5
2 Getting started with your KFM series 25
2.1 Location 25
2.2 Uncrating 25
2.2.1 Front and sides assemblies 27
2.3 Check for damage 29
2.4 Control panel and main features 30
2.5 Check serial, model numbers and requested options 32
2.6 Warning/Caution labels 34
2.7 Check your electrical installation 38
2.8 Electrical, drain and refrigeration connections (remotes only) 38
2.9 Joining 39
2.10 Plugging and start 47
3 Refrigeration 49
3.1 Self contained refrigeration equipment and defrost 49
3.2 Refrigeration loads (remotes only) 51
4 Electrical 52
4.1. Electrical specifications data 52
4.2 Electrical service receptacles (optional) 54
4.3 Electrical diagrams 55
4.4 Electronic controller 63
5 Maintenance 66
5.1 Exterior cleaning 66
5.2 Interior cleaning 67
5.3 Shelf removing 67
5.4 Sliding doors removal 68
5.5 Light substitution 69
5.6 Panels and protection grill removal 70
5.7 Condensator cleaning 70
5.8 Evaporator cleaning 71
5.9 Evap Pan cleaning 71
5.10 Fish Pans cleaning 72
5.11 Drain inspection 73
5.12 Glass type conversion model 73
6 Troubleshooting/Service 74
6.1 Troubleshooting 74
6.2 Service 75
7 Warranty 77
8 Notes 78
4
This page has been left blank intentionally.
77
7 Warranty
12 month warranty for all parts from the invoice date. A new part will be provided free
of charge. Defective part must be returned to the manufacturer.
Warranty claims: All claims must include model number, serial number, date of
purchase, date of installation and additional information about the supposed defect.
All service work must be authorized by MVP group.
MVP group reserves the right to select the service company.
Loss of food or other damages caused by faulty equipment aren’t covered by this
warranty.
Warranty does not cover damage when uncrating.
Work made necessary, by lack of maintenance or cleaning are not covered by this
warranty.
Warranty does not cover damage or malfunction result of improper use or installation.
Warranty does not cover negligence, misuse and operation on wrong voltage.
Warranty does not apply if the serial number is altered or defaced.
Failure to comply with the instructions in this manual shall avoid warranty.
76
Service by Type of
action Date
Serial
number and
model
Service by
5
1 General information
1.1 Case description
KFM series model (number) system.
KFM CG 40 S
AAA BB CC D
AAA
BB
CC
D
Model variation
CG-Curved glass tilt forward
FG-Flat glass tilt forward
OF-Open front
SC-Seafood curved glass tilt
forward
SF-Seafood flat glass tilt
forward
SO-Seafood open front
Length
40''
50''
60''
80''
100''
120''
Type of Unit.
S-Self Contained
R-Remote
D-Dry
Basic model |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6
KFM-CG-S(R)(D)
KFM SERIES
KFM-CG-S(R)(D)
75
Equipment runs constantly:
Condenser dirty.
Condenser fan malfunction.
Temperature and relative humidity too high.
Starting relay burns out:
Low voltage.
High voltage.
Compressor short cycles.
Incorrect running capacitor.
Incorrect relay.
Head pressure too high:
Unit overcharged.
Air or other non condensable gases in the system.
Clogged condenser.
Defective condenser fan motor.
Unit location too hot.
Restriction in charge line.
Head pressure too low:
Insufficient refrigerant charge.
Leak in the system.
Cold location.
Noisy unit:
Compressor oil charge low.
Fan blade causing vibrations.
Tube rattle.
Loose parts.
Case not leveled.
6.2 Service
This operation must be performed by a qualified technician.
For spare parts, contact your distributor.
74
6 Troubleshooting/Service
6.1 Troubleshooting
Service must be performed by a qualified technician.
Doors not closing:
Check for leveled floor.
Check for obstruction.
Remove doors and check the bearings.
Lights not working:
Check light switch position.
Check light connections.
Warm case temperature:
Check for air return grille obstruction.
Check for air drafts.
Check store temperature.
Check for condenser obstruction and cleaning.
Check for frozen evaporator.
Check set point.
Display area is over filled.
Fans not working:
Check electrical connections.
Check for any debris.
Case not aligning:
Check for leveled floor.
Check instructions for joining.
Display not working:
Check main power switch position..
Check electrical connections.
Compressor not starting:
Disconnect switch open.
Blown fuse.
Overload protective tripped.
Low charge of refrigerant.
Relay defective.
7
KFM-SC-S(R)
KFM-SC-S(R)
8
KFM-FG-S(R)(D)
KFM-FG-S(R)(D)
73
5.11 Drain inspection
Check for drain obstruction and correct position every month (Remotes only).
5.12 Glass type conversion model
This operation must be performed by a qualified technician.
Contact distributor for specific manual to assist in conversion.
72
To access the evap pan:
- Remove protection grille.
- Unplug the evap pan.
- Relieve the screws and take the evap pan off.
- Clean with soft detergent or warm water.
5.10 Fish Pans cleaning
This operation must be performed by a qualified technician.
All operations must be done with the unit disconnected.
To access the fish pan:
- Remove the front glass
- Empty the fish pan
- Clean the pan with adequate detergent and warm water
- Remove all particles from the drain
9
KFM-SF-S(R)
KFM-SF-S(R)
10
KFM-OF-S(R)(D)
KFM-OF-S(R)(D)
71
5.8 Evaporator cleaning
This operation must be performed by a qualified technician.
All operations must be done with the unit disconnected.
To access the evaporator:
- Open your unit
- Lift and remove exposition panels
- Use tool for the screws and clean
5.9 Evap Pan cleaning
This operation must be performed by a qualified technician.
All operations must be done with the unit disconnected.
Pan can be hot!
This operation must be done weekly.
70
5.6 Panels and protection grille removal
5.7 Condenser cleaning
This operation must be performed by a qualified technician.
All operations must be done with the unit disconnected.
Condenser must be regularly cleaned (every month). Use a brush or vacuum it.
To get to the condenser must remove frontal panel.
11
KFM-SO-S(R)
KFM-SO-S(R)
12
Front
Implantation
Drain outlet
Electrical board
Refrigeration piping
KFM-CG-xx-S
69
5.5 Light substitution
To replace lights follow the steps:
All operations must be done with the unit disconnected.
- Disconnect the light
- Unscrew the light holder and remove the light
- Insert a new light in the same place of the old one, screw the holder connect it
- Screw the light and connect it
- Plug and turn on the light
1
1
1
1
1
2
2
2
2
2
68
5.4. Back Sliding doors removal
Back sliding doors are easy to take off.
- Grab door push up and then tilt the bottom towards you.
To put the door back on, just reverse the previous step.
13
Front
KFM-CG-xx-R
66
5 Maintenance
5.1 Exterior cleaning
All operations must be done with the unit disconnected.
Clean surfaces (glass/metal/plastic) with soft detergents or warm water. Do not use
abrasive cleanser.
/3 Probe display response MSYF
MSYF
MSYF
SYF
SYF
SYF
SYF
MSYF
YF
MS
-
ºC/ºF
ºC/ºF
ºC/ºF
min
hours
min
ag
-
-
C
C
F
F
C
F
F
C
C
C
0
-20
rl
0,1
0
0
1
0
0
0
0
0,0
0,0
2,0
0
8
30
0
2
2
15
20
r2
20
15
250
250
1
4
4
/5
/A2
/c1
Select ºC or ºF
0: ºC
1: ºF
Con guration of probe 2 (S2)
0: Probe absent
1: Product probe (display only)
2: Defrost probe
3: Condenser probe
4: Antifreeze probe
Calibration of probe 1
Temperature set point
Control delta
Minimum compressor OFF time
Interval between defrosts
Maximum defrost duration, evaporator
St
rd
c2
dl
dP1
S
S
S
Sy
y
y
ym
m
m
mb
b
b
bo
o
o
ol
l
l
l
Symbol
C
C
C
Co
o
o
od
d
d
de
e
e
e
Code
P
P
P
Pa
a
a
ar
r
r
ra
a
a
am
m
m
met
et
et
ete
e
e
er
r
r
r
Parameter
M
M
M
Mod
od
od
ode
e
e
els
ls
ls
ls
Models
U
U
U
UOM
OM
OM
OM
UOM
T
T
T
Typ
yp
yp
ype
e
e
e
Type
M
M
M
Min
in
in
in
Min
M
M
M
Max
ax
ax
ax
Max
D
D
D
De
e
e
ef
f
f
f.
.
.
.
Def.
Ma
Ma
Ma
Main
in
in
in pa
pa
pa
param
ram
ram
ramet
et
et
eters
ers
ers
ers
Main parameters
15
Front
KFM-CG-xx-R
16
Front
KFM-OF-xx-S
Drain outlet
Electrical board
Refrigeration piping
65
Controller must be handled by a qualified technician.
Normal operation
Buttons on the keypad
· if pressed for more than
if pressed for more than
if pressed for more than
if pressed for more than
· if pressed for more than 5 s together
· if pressed for more than 5 s together with DOWN/DEF button, enables/disables
· if pressed for more than 5 s together with PRG/MUTE button, accesses the
· if pressed for more than 5 s together with UP/AUX button, enables/disables
· if pressed for more than 5 s with button, starts the procedure for printingSET
· if pressed for more than 1 s together with DOWN/DEF button, displays a
· if pressed for more than 1 s together with SET button, displays a submenu
Start-up : if Automatic address
pressed for assignment:
more than if pressed for 1 s enters
5 s at start-up, the automatic serial
starts the address assigning
default procedure
parameter
setting
· in the event of alarm: parameters
active alarm with manual reset
printing the report (function available, with management to be implemented)
silences the audible · if pressed for more than 5 s together
· if pressed for more than 5 s together with button, resets anyPRG/MUTE
· if pressed for more than 5 s together with UP/AUX, starts the procedure for
alarm (buzzer) and with the UP/AUX button resets any
disables the alarm relay alarm with manual reset
5 s accessed the menu
1 s, enables/disables
Button Press. the button alone Pressing together with other buttons
5 s, enables/disables a
1 s, displays and/or set
with the SET button, accesses the
the continuous cycle operation
menu for setting the type “C“ parameters “C (configuration) or downloading
the parameters
the continuous cycle operation
for setting type “F”
the auxiliary output
manual defrost
the set point
menu for setting the type “C“
(frequent) parameters (configuration) or downloading the
the reports (function available, with management to be implemented)
submenu with the HACCP alarm parameters (HA, HAn, HF, HFn)
with the HACCP alarm parameters (HA, HAn, HF, HFn)
Set
Set
Set
Set
Set
Prg
Prg
Prg
Prg
Prg
mute
aux
def
Si
Si
Si
Sign
gn
gn
gnals
als
als
als o
o
o
on
n
n
n the
the
the
the d
d
d
dis
is
is
ispla
pla
pla
play
y
y
y
Signals on the display
The blinking status indicates a request for activatuin that cannot be implemented until the end of
the corresponding delay times.
compressor ON comp. OFF compressor request
fan ON fan OFF fan request
defrost in progress
auxiliary output
delayed external
AL
AL
AL
ALA
A
A
ARM
RM
RM
RM
ALARM
CLOCK
CLOCK
CLOCK
CLOCK
CLOCK
LI
LI
LI
LIGHT
GHT
GHT
GHT
LIGHT
SERV
SERV
SERV
SERVICE
ICE
ICE
ICE
SERVICE
HACC
HACC
HACC
HACCP
P
P
P
HACCP
C
C
C
CO
O
O
ONT
NT
NT
NTIN
IN
IN
INUO
UO
UO
UOU
U
U
US
S
S
S
CONTINUOUS
CYCL
CYCL
CYCL
CYCLE
E
E
E
CYCLE
DEF
DEF
DEF
DEFROST
ROST
ROST
ROST
DEFROST
Func
Func
Func
Function
tion
tion
tion
Function
COM
COM
COM
COMPRES
PRES
PRES
PRESS.
S.
S.
S.
COMPRESS.
FAN
FAN
FAN
FAN
FAN
O
O
O
ON
N
N
N
ON
I
I
I
Ic
c
c
con
on
on
on
Icon
O
O
O
OF
F
F
FF
F
F
F
OFF
b
b
b
bl
l
l
lin
in
in
ink
k
k
k
blink
S
S
S
St
t
t
ta
a
a
art
rt
rt
rtu
u
u
up
p
p
p
Startup
AUX
AUX
AUX
AUX
AUX
A
A
A
AU
U
U
UX
X
X
X
AUX
s
s
s
sen
en
en
en
t
t
t
t
sent
H
H
H
HA
A
A
AC
C
C
CC
C
C
CP
P
P
P
HACCP
at least one timed
auxiliary output auxiliary output
no malfunction
HACCP function HACCP alarm (HA and/or HF)HACCP function
enabled
not enabled request
not enabled
no timed defrost is ON if Real-Timeclock alarm
anti-sweat heater function active
malfunction (eg. EEPROM error
or probe fault)
present Clock present
no alarm present
alarm (before the
defrost has been
LIGHT ACTIVE LIGHT NOT ACTIVE
set
expiry of the time
“A7)
auxiliary output anti-sweat heater function active
alarms in normal operation (eg.
high/low temp.) or alarm from
ext. digital input immediate or
delayed
AUX active AUX not active
defrost not required defrost request
enabled
62
Discription
9
12
20
21
22
29
30
Terminal block
Evaporator fan
Light switch
Pilot light
Switch
Transformer
Led lighting
|
|
|
|
|
|
|
19
Front
KFM-SC-xx-R
20
Front
Drain outlet
Electrical board
Refrigeration piping
Electrical wiring
KFM-SF-xx-S
61
KFM-CG/FG-40/50/60/80/100/120-D


Produktspezifikationen

Marke: Hydra Kool
Kategorie: Kühlschrank
Modell: KFM-SF-50-S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hydra Kool KFM-SF-50-S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kühlschrank Hydra Kool

Bedienungsanleitung Kühlschrank

Neueste Bedienungsanleitung für -Kategorien-