Husqvarna Rider 316Ts AWD Bedienungsanleitung

Husqvarna Nicht kategorisiert Rider 316Ts AWD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Husqvarna Rider 316Ts AWD (36 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
EE
EEnn
nngg
ggll
llii
iiss
sshh
hh
Rider 316T Rider 316T
AWD
Rider 316Ts AWD Rider 316TXs AWD
Oper
ator
â€Č
s manual
Please r
ead the operator’s manual carefully and make sure you
understand the instructions before using the machine.
2
–
English
CONTENTS
Contents
CONTENTS
Contents
...................................................................... 2
Ser
vice journal
Pre-deliv
ery service ..................................................... 3
After the ïŹrst 8 hours ................................................... 3
INTR
ODUCTION
Dear Customer
, ............................................................ 4
Driving and transport on public roads .......................... 4
Towing .......................................................................... 4
Use .............................................................................. 4
Good service ................................................................ 4
KEY
TO SYMBOLS
Symbols
....................................................................... 5
WHA
T IS WHAT?
What is what on the r
ide-on mower ............................. 7
SAFETY INSTR
UCTIONS
Saf
ety instructions ........................................................ 8
Driving on slopes ......................................................... 9
Children ....................................................................... 10
Maintenance ................................................................ 10
Transport ...................................................................... 11
PRESENT
ATION
Presentation
................................................................. 12
Throttle trigger ............................................................. 12
Choke control ............................................................... 12
Speed limiter ................................................................ 12
Parking brake ............................................................... 12
Cutting unit ................................................................... 12
Lifting lever for the cutting unit ..................................... 13
Cutting height adjustment lever ................................... 13
Lights ........................................................................... 13
Counter ........................................................................ 13
Seat ............................................................................. 13
Fueling ......................................................................... 13
Release lever ............................................................... 14
Driving
Bef
ore starting ............................................................. 15
Start the engine ........................................................... 15
Starting the engine with a weak battery ....................... 16
Driving the Rider .......................................................... 16
Cutting tips .................................................................. 17
Stop the engine ............................................................ 17
Maintenance
Maintenance schedule
................................................. 18
Cleaning ....................................................................... 19
Removing of the machine hoods ................................. 19
Checking and adjusting the steering wires .................. 19
Adjusting the parking brake Rider 316T ....................... 20
Adjusting the parking brake ......................................... 20
Checking and adjusting of throttle wire ........................ 20
Checking and adjusting the choke wire ....................... 21
Replacement of fuel ïŹlter ............................................. 21
Checking the fuel pump’s air ïŹlter ................................ 21
Replacing the air ïŹlter .................................................. 21
Ignition system ............................................................. 22
Check the safety system .............................................. 22
Replacing the light bulbs .............................................. 22
Main fuse ...................................................................... 23
Checking the tyre pressure .......................................... 23
Checking the engine’s cooling air intake ...................... 23
Fitting the cutting head ................................................. 24
Removing the cutting unit ............................................. 25
Checking and adjustment of the cutting unit’s ground
pressure .......................................................................25
Checking the cutting unit’s parallelism ......................... 25
Adjusting the parallelism of the cutting unit .................. 26
Replacing the cutting unit belts .................................... 26
Service position for the cutting unit .............................. 27
Checking the blades ..................................................... 28
Removing the BioClip plug ........................................... 28
Lubrication
Chec
king the engine’s oil level. .................................... 29
Changing the oil ïŹlter ................................................... 29
Checking the transmission oil level .............................. 30
Lubricating the belt adjuster ......................................... 30
General lubrication ....................................................... 30
T
roubleshooting schedule
Storage
Winter stor
age .............................................................. 32
Guard ........................................................................... 32
Service ......................................................................... 32
T
echnical data
EC-declar
ation of conformity ........................................ 35
English
–
3
Ser
vice journal
Pre-deliver
y service
1
Charge the battery for 4 hours at max. 3 amp.
2 Fit steering wheel, seat and any optional
equipment.
3 Check and adjust tyre pressure (60 Kpa, 0.6 bar,
9 PSI).
4 Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit
should be 12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is about 2-4
mm / 1/8” higher than front edge.
Adjust the cutting unit’s cutting height setting so
that the connection rod is tensed at the lowest
cutting height.
5 Check that the right amount of oil is in the engine.
6 Check that there is oil in the transmission’s oil
tank.
7 Connect battery.
8 Fill with fuel and start engine.
9 Check that machine does not move in neutral.
10 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
The safety switch for the hydrostat pedals.
11 Check the engine speed See the Technical data
section.
12 Check the synchronisation between the front and
rear wheels. (Only AWD-machines) See the
workshop manual.
13 Tell customer about:
Needs and beneïŹts of following the service
schedule.
Servicing and the inïŹ‚uence of this journal on the
second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems.
CertiïŹed:
_______________________________________________
Date, mileage, stamp, signature
After the ïŹrst 8 hours
1
Change engine oil
2 Change the oil in the gearbox. (Only AWD-
machines)
3 Check the synchronisation between the front and
rear wheels. (Only AWD-machines)


Produktspezifikationen

Marke: Husqvarna
Kategorie: Nicht kategorisiert
Modell: Rider 316Ts AWD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Husqvarna Rider 316Ts AWD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Husqvarna

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-