Hunter HEPAtech 30055 Bedienungsanleitung

Hunter Luftreiniger HEPAtech 30055

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hunter HEPAtech 30055 (12 Seiten) in der Kategorie Luftreiniger. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
41303-01 10/04/2007 1 © 2007 Hunter Fan Company
HEPAtech
Air Purication System
These air puriers all use Model 30920 replacement Filter.
Models 30054, 30055, 37055, 30070 and 37065
Models 30075 and 30080
www.hunterfan.com
ENGLISH
See page 2
ESPAÑOL
Vea la gina 8
41303-01 10/04/2007 2 © 2007 Hunter Fan Company
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER
AND SAVE THESE IMPORTANT INSTRUCTIONS
1. This Air Purier is designed for use on a at, level surface and may not work properly on
an uneven surface. ALWAYS place this Air Purier on a rm, level surface. ALWAYS place
the Air Purier at least six (6) inches away from walls and heat sources such as stoves,
radiators, or heaters.
2. Place the Air Purier in an area that is out of the reach of children.
3. Before using the Air Purier, extend the cord and inspect for any signs of damage. DO
NOT use the product if the cord has been damaged.
4. This product has a polarized plug (one blade is wider than the other) as a safety feature.
This plug will t into a polarized outlet only one way. If the plug does not t fully into
the outlet, reverse the plug. If it still does not t, contact a qualied electrician. DO NOT
attempt to defeat or override this safety feature.
5. ALWAYS UNPLUG the Air Purier when it is not in operation, while the lter is being
changed, and while it is being cleaned.
6. DO NOT tilt or move the Air Purier while it is in operation. Shut o and unplug before
moving.
7. DO NOT immerse the Air Purier in water as permanent damage will occur. Refer to and
follow the CLEANING AND FILTER REPLACEMENT instructions.
Introduction
Thank you for purchasing the HEPAtech™ Air Purication System from Hunter Fan Company.
You have purchased our latest development in portable Air Purication Systems. This system
has been developed to improve the quality of the air you breathe.
Our HEPAtech™ Air Purication System out performs other air purication systems by quickly
and eectively removing dust, smoke, and pollen particles as small as .1 microns in size.
Room air is pulled in through the front grill and cleaned across the HEPAtech™ lter. Clean
air is then released out the top grill in order to avoid stirring up settled particles.
Models 30070, 37065, 30075 and 30080 include an ionizer.
Using the ionizer improves the quality of air in the room. Negative ions are released into the
air and positively charged dust, smoke, and pollen particles are attracted to the negative
ions. These particles settle out of the air and can be vacuumed up during normal cleaning.
These particles are also more easily captured by the HEPAtechlter as they pass through
the HEPAtech™ Air Purication System. To ensure the best air circulation in the room, we
recommend that you place your air purier six inches away from any walls.
41303-01 10/04/2007 3 © 2007 Hunter Fan Company
Using Your Air Purier
1. Remove your air purier from the box and take it out of the clear plastic protective
bag.
2. Place your HEPAtech™ Air Purication System on a rm, at surface. Before turning the
Air Purier on, you need to open the front grill and remove any protective plastic that
may be surrounding the HEPAtechlter. To release the front grill, place your ngers
behind the tabs and pull forward.
3. The lter will be installed in the correct position. Grasp the lter and pull it forward.
When you replace the lter in the unit, the white lter material should be facing outward
(towards you) and the black carbon material should be hidden from view (inside the
unit).
4. Replace the front grill. Be sure that the bottom tabs are in location rst, and then push
the top of the grill forward until it is closed. The unit is now ready for normal operation.
NOTE: The unit will not operate unless the door is placed in the proper position.
5. Plug the unit into a 120V electrical outlet.
Models 30054, 30055 and 37055
6. Turn the unit on with the rocker switch. The green light will be illuminated when the
power is on. Then, select a speed by sliding the speed selector to the appropriate loca-
tion.
Models 30070 and 37065
7. Turn the power on by sliding the slide switch to the appropriate speed. You may also
use the ionizer with this model. To turn the ionizer on’, press the rocker switch to the ‘l’
position. The green light will be illuminated when the ionizer is on.
Models 30075 and Model 30080
8. Turn the power on’ and choose the appropriate speed with the rotary switch. You may
also use the ionizer with this model. To turn the ionizer on’, press the rocker switch to
the ‘l’ position. The green light will be illuminated when the ionizer is on.
AIR PURIFIER PARTS
FIGURE 1
Models 30055, 37055, 30070, 37065, 30075 and 30080 all open in the same manner.


Produktspezifikationen

Marke: Hunter
Kategorie: Luftreiniger
Modell: HEPAtech 30055

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hunter HEPAtech 30055 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Luftreiniger Hunter

Bedienungsanleitung Luftreiniger

Neueste Bedienungsanleitung für -Kategorien-