Hulk Power HP02P010SS Bedienungsanleitung

Hulk Power Kompressor HP02P010SS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hulk Power HP02P010SS (32 Seiten) in der Kategorie Kompressor. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
EMAX Compressor
1000 Cass Dr., Clayton, OH 45315 USA
866.294.4153
info@emaxcompressor.com
Fax: (937) 540-1157
Portable Air Compressor
Operating Instructions
EMAX designs and manufactures products for safe
operation. However, operators and maintenance per-
sons are responsible for maintaining safety. All safety
precautions are included to provide a guideline for
minimizing the possibility of accidents and property
damage while equipment is in operation.
Keep these instructions for reference.
Model # :
UPC:
HP02P010SS man v.171212
HP02P010SS
815002014005
2
HULK Power
Model Specifications
Model: HP02P010SS
Motor: 120
V ~ 60
Hz, 14.5
A
Power: 2
HP
Max. pressure: 125 psi
No-load speed: 1700 rpm
Air delivery:
8.39 cfm @ 40 psi
5.77 cfm @ 90 psi
Tank size: 10 gal. (37.9 L)
Noise: 41 dB(A)
Weight: 85.4 lb. (38.7 kg)
Contents
Model Specifications 2 …………………………
Description 3 ………………………………………
Get to know your compressor 3 …………………
Safety Information 4 ……………………………
Basic Guidelines 5 ………………………………
Breathable Air 5 ………………………………………
Pressurized Components 5 ……………………
Personal Protective Equipment 5 ………………
Inspection 5 …………………………………………
Installation 5 ………………………………………
Area 5 ……………………………………………………
Electrical Safety 6 ……………………………………
Operation 6 …………………………………………
Safety Rules 6 ………………………………………
Air Tool Cautions 7 …………………………………
Power Source Connection 8 …………………
Power Requirements 8 ……………………………
Grounding Instructions 8 …………………………
Connect to power source 8 ……………………
Getting Started 8 …………………………………
Assembly 8 …………………………………………
Installing the air filter 8 …………………………
Operation 8 …………………………………………
Before operating your air compressor: 8
General Overview 9 ………………………………
Installation and Location 9 ……………………
Connecting to Power Source 9 …………………
Extension Cords 9 ……………………………………
Attaching an air hose 9…………………………
Drain Valve 9 ……………………………………………
Pressure Switch 9 ……………………………………
Adjusting the air pressure 10 ……………………
Shutting off your compressor 10 …………………
Cold Weather Starting 10 …………………………
Maintenance 10 ……………………………………
Daily 10 ……………………………………………………
Monthly 10 ………………………………………………
Storage 10 …………………………………………………
Troubleshooting 11 ………………………………
Parts List 12 …………………………………………
Schematic Drawing 13 ……………………………
Warranty Statement 14 …………………………
3HP02P010SS man v.171212
Air Compressor
Description
fig 1
12 3
12
3
12
77
9
Get to know your compressor
Please refer to  g 1, 2 and 3.
1. TANK DRAIN VALVE
(located on bottom of tank) - The tank drain
valve can be opened to allow moisture and
compressed air to be released from the air tank.
The tank drain valve should
always be opened slowly to
avoid damage to equipment and possible injury.
2. AIR TANK -
ten gallon (37.9 liters) tank
3. RUBBER FOOT
Reduces compressor vibration and movment.
4. SAFETY VALVE -
The safety valve automatically relieves pressure
from the air tank in the event of excessive
pressure build up. Safety Valve is preset at
factory. Do not attempt to make any adjustments
to the safety valve. Periodically pull the ring on
the safety valve end to check that it is working
properly.
5. RESERVOIR AIR PRESSURE GAUGE -
Indicates pressure of compressed air built up in
the tank.
6. PRESSURE SWITCH -
Controlled by the red-tipped power switch lever
which turns the air compressor on and o󰀨 . When
switch lever is pulled up, compressor is turned
o󰀨 . When lever is moved down to the "Auto"
position, the pressure switch is engaged and will
start the compressor pump automatically when
tank pressure is below the factory-set minimum.
The pressure switch continues to monitor the
pressure and turns the pump o󰀨 when the
pressure reaches the factory-set maximum.
Always make sure that the
compressor power switch is in the
OFF position before performing any maintenance
or plugging the compressor into a power supply.


Produktspezifikationen

Marke: Hulk Power
Kategorie: Kompressor
Modell: HP02P010SS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hulk Power HP02P010SS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kompressor Hulk Power

Bedienungsanleitung Kompressor

Neueste Bedienungsanleitung für -Kategorien-