Hubsan H502S X4 Desire FPV Plus Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Hubsan H502S X4 Desire FPV Plus (27 Seiten) in der Kategorie Drohne. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/27
®
ITEM NO: H502S
FLY WHEN NO GPS SETUP, SEE CAUTION ON PAGE 02
ARM/DISARM MOTORS, SEE PAGE 06
RTH FUNCTION, SEE PAGE 09-10
FOLLOW ME FUNCTION, SEE PAGE 10-11
COMPASS CALIBRATION, SEE PAGE 16
TRANSMITTER CALIBRATION, SEE PAGE 17
THE HUBSAN FPV
X4 DESIRE
READ THE INSTRUCTION MANUAL CAREFULLY
Ages 14+
01 ©2016 Hubsan
IMPORTANT SAFETY NOTES
Hubsan FPV X4 Desire
Please read the instruction manual carefully!
OPERATION:
Flight:
Take responsiblity for the safety of yourself and others when flying the X4 !
Do not fly the X4 in crowded places.
Do not fly in bad weather.
Never try to catch the X4 while it is in flight.
This model is intended for experienced pilots age 14+.
Power off the X4 after flight to prevent the propellers from causing injuries.
Always remove the battery after you stop flying to avoid injuries from accidentally powering
on the motors.
Always take great caution to protect yourself when near the propellers. The flight system
will start after powering on regardless of the transmitter signal. The high speed propellers
are very dangerous.
Power off the X4 after every flight, otherwise the propellers may still rotate and cause injury.
Be extremely careful and responsible when using the drone. Small electronic components can
be damaged by crashing or by dropping the X4 into water. To avoid further damages, please
replace broken parts immediately.
0:08:49 M2
Exit
0:08:49
MAIN MENU
Set Reverse
Set Sensitivity
5.8G Frequency
Set Manual
Fly When no GPS
Show Version
Exit
M2
Fly When NO GPS
YES
For safety, the quadcopter is default set to CAN NOT FLY WHEN NO GPS. If you prefer to
fly when GPS is not available, please reset the value as instructed below before using.
Pull the throttle stick to the lowest position and press the Elevator stick for 1.5 seconds to
enter into the MAIN MENU interface. Push the Elevator stick up/down to select “Fly When
no GPS”, push the stick right to enter into the “ Fly When no GPS” interface, select “YES”.
The Default Setting is “NO”.
Select “Exit” to exit.
CAUTION:
02 ©2016 Hubsan
Produktspezifikationen
Marke: | Hubsan |
Kategorie: | Drohne |
Modell: | H502S X4 Desire FPV Plus |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hubsan H502S X4 Desire FPV Plus benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Drohne Hubsan
16 August 2024
16 August 2024
15 August 2024
14 August 2024
14 August 2024
14 August 2024
14 August 2024
13 August 2024
13 August 2024
13 August 2024
Bedienungsanleitung Drohne
- Drohne Hama
- Drohne Manta
- Drohne Maginon
- Drohne Denver
- Drohne Blaupunkt
- Drohne Carrera
- Drohne ARCHOS
- Drohne Xiaomi
- Drohne Prixton
- Drohne Carson
- Drohne DJI
- Drohne Ninco
- Drohne Parrot
- Drohne Reely
- Drohne Ryze
- Drohne Syma
- Drohne Revell
- Drohne Overmax
- Drohne Kogan
- Drohne AEE
- Drohne GoPro
- Drohne VIZU
- Drohne SereneLife
- Drohne Swann
- Drohne Joby
- Drohne Autel
- Drohne Insta360
- Drohne Hobbywing
- Drohne Emax
- Drohne Freefly
- Drohne GPX
- Drohne Graupner
- Drohne Jamara
- Drohne Quadrone
- Drohne Robbe
- Drohne Steren
- Drohne WLtoys
- Drohne WowWee
- Drohne Yuneec
- Drohne LRP
- Drohne Snakebyte
- Drohne Zerotech
- Drohne Dahua Technology
- Drohne SkyRC
- Drohne DF-Models
- Drohne Brigmton
- Drohne Kaiser Baas
- Drohne Blade
- Drohne Fimi
- Drohne Dromida
- Drohne Makeblock
- Drohne Odyssey
- Drohne CHASING
- Drohne Air Wars
- Drohne T.I.E.
- Drohne UGo
- Drohne SwellPro
- Drohne Estes
- Drohne Zero Zero Robotics
- Drohne Contixo
- Drohne Nanuk
- Drohne Amewi
- Drohne Snaptain
- Drohne Hobby Zone
- Drohne SkyRider
- Drohne Sky Rider
- Drohne Pgytech
- Drohne XTIM
- Drohne LUXWALLET
- Drohne Zero-X
- Drohne EHang
- Drohne 3DR
- Drohne Extreme Fliers
- Drohne PowerVision
- Drohne Holy Stone
Neueste Bedienungsanleitung fĂĽr -Kategorien-
7 Oktober 2024
2 Oktober 2024
28 September 2024
27 September 2024
24 September 2024
20 September 2024
17 September 2024
17 September 2024
12 September 2024
10 September 2024