HQ Power VLP20B Bedienungsanleitung
HQ Power
Effektmaschine
VLP20B
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HQ Power VLP20B (18 Seiten) in der Kategorie Effektmaschine. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/18
VLP20B - VLP20C
PAR20 PROJECTOR - BLACK OR CHROME
PAR20 PROJECTOR - - ZWART OF VERCHROOMD
PROJECTEUR PAR20 - NOIR OU CHROMÉ
FOCO PAR20 - NEGRO O CROMADO
PAR20- - SCHEINWERFER SCHWARZ ODER VERCHROMT
VLP20B VLP20C
USER MANUAL 2
GEBRUIKERSHANDLEIDING 5
MODE D'EMPLOI 8
MANUAL DEL USUARIO 11
BEDIENUNGSANLEITUNG 14
VLP20B - VLP20C
V. 01 – 2 22/10/2013 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Please read the manual thoroughly before bringing this device into HQPowerâ„¢!
service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Safety Instructions
Keep this device away from children and unauthorized users.
Indoor use only. Keep this device away from rain, moisture, splashing and dripping
liquids.
Be very careful during the installation: touching live wires can cause life-threatening
electroshocks.
Do not touch the device during operation as the housing heats up.
Do not stare directly at the light source, as this may cause
• epileptic seizure in sensitive people
• temporarily loss of sight (flash blindness)
• permanent (irreversible) eye damage.
• Always disconnect mains power when device not in use or when servicing or maintenance activities
are performed. Handle the power cord by the plug only.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a
qualified person carry out the electric connection.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this
manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if
necessary.
• Respect a minimum distance of 1 m between the device’s light output and any illuminated surface.
• Use an appropriate safety cable to fix the device (e.g. VDLSC7N or VDLSC8N).
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
VLP20B - VLP20C
V. 01 – 3 22/10/2013 ©Velleman nv
• A qualified technician should install and service this device.
• Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
• This device is designed for professional use on stage, in discos, theatres, etc. The device should only
be used indoors with the appropriate current and power supply (see Technical Specifications).
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
• There may be a particular smell when the device is activated for the first time. This is normal and
any smell will gradually disappear.
• Do not connect the device to a dimming pack, even if the dimmer channel is used solely for 0% to
100% switch.
• Use the original packaging if the device is to be transported.
• Keep this manual for future reference.
4. Features
• lightweight aluminium construction
• socket for 50 W / 230 V lamps
• power cable with plug
5. Installation
Lamp
• Only fit or replace a lamp when the device is unplugged from the mains.
• Let a lamp cool down before replacing it as the temperature of a lamp can reach 700°C during
operation.
• When handling a halogen lamp, do not touch it with your bare hands. Use a cloth to insert or remove
it.
• Do not install lamps with a higher wattage. They get hotter than this device was designed for.
• Do not operate the device as long as the lamp is not securely fastened or the cover still opened.
• Replace any deformed or damaged lamp with a lamp of the same type (see Technical Specifications).
To replace the lamp:
1. Pull the extension spring and open the housing.
2. Remove the old and insert a new one.
3. Fix the socket and close the device.
Mounting guidelines
• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable
norms.
• The construction to which the device is attached should be able to support 10 times the weight of the
device for one hour without deformation.
• The installation must always be secured with a secondary attachment e.g. a safety cable.
• Never stand directly below the device when it is being mounted, removed or serviced.
• Have a qualified technician check the device once a year and once before you bring it into service.
• Install the device in a location with few passers by that is in- accessible to unauthorised persons.
• Overhead mounting requires extensive experience: calculating work load limits, determining the
installation material to be used. Have the material and the device itself checked regularly. Do not
attempt to install the device yourself if you lack these qualifications as improper installation may
result in injuries.
• Make sure there is no flammable material within a 0.5 m radius of the device.
• Connect the device to the mains with the power plug.
• The installation has to be approved by an expert before the device is taken into service.
6. Cleaning and Maintenance
• Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Produktspezifikationen
| Marke: | HQ Power |
| Kategorie: | Effektmaschine |
| Modell: | VLP20B |
Brauchst du Hilfe?
Wenn Sie Hilfe mit HQ Power VLP20B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Effektmaschine HQ Power
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
21 August 2024
Bedienungsanleitung Effektmaschine
- Effektmaschine NGS
- Effektmaschine Velleman
- Effektmaschine König
- Effektmaschine Pyle
- Effektmaschine Antari
- Effektmaschine BeamZ
- Effektmaschine Stairville
- Effektmaschine American DJ
- Effektmaschine Karma
- Effektmaschine Adj
- Effektmaschine Behringer
- Effektmaschine Eurolite
- Effektmaschine Showtec
- Effektmaschine Monoprice
- Effektmaschine Lexicon
- Effektmaschine Monacor
- Effektmaschine HQ
- Effektmaschine Viking
- Effektmaschine Elation
- Effektmaschine Cameo
- Effektmaschine Qtx
- Effektmaschine Midas
- Effektmaschine Black Lion Audio
- Effektmaschine Martin
- Effektmaschine Steren
- Effektmaschine TCM FX
- Effektmaschine Fun Generation
- Effektmaschine Futurelight
- Effektmaschine IMG Stage Line
- Effektmaschine TC Electronic
- Effektmaschine Lab Gruppen
- Effektmaschine Hazebase
- Effektmaschine Doepfer
- Effektmaschine Chauvet
- Effektmaschine Valueline
- Effektmaschine Laserworld
- Effektmaschine Klark Teknik
- Effektmaschine Eliminator Lighting
- Effektmaschine BoomTone DJ
- Effektmaschine Sagitter
- Effektmaschine Drawmer
- Effektmaschine DJPower
- Effektmaschine The Confetti Maker
- Effektmaschine Blizzard
- Effektmaschine ColorKey
- Effektmaschine Lotronic
- Effektmaschine Valcom
- Effektmaschine Evo-Lite
- Effektmaschine IGS Audio
- Effektmaschine Magmatic
- Effektmaschine Technical Pro
- Effektmaschine Rosco
- Effektmaschine Showven
Neueste Bedienungsanleitung für -Kategorien-
10 Oktober 2024
8 Oktober 2024
6 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
30 September 2024
28 September 2024
25 September 2024