HQ Power VDPC145 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HQ Power VDPC145 (47 Seiten) in der Kategorie Regeln. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/47
VDPC145
192-CHANNEL DMX CONTROLLER
192-KANAALS DMX LICHTSTURING
RÉGIE DE LUMIÈRE DMX 192 CANAUX
CONTROLADOR DMX DE 192 CANALES
192-KANAL-DMX-STEUERGERÄT
192-CIO KANAŁOWY STEROWNIK DMX
USER MANUAL
GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
INSTRUKCJA OBSŁUGI
VDPC145_v2 VELLEMAN 2
VDPC145 – 192-CHANNEL DMX CONTROLLER
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the e bringing this device into service. VDPC145! Please read the manual carefully befor
This is a 192-channel DMX controller, capable of controlling 12 devices with up to 16 channels. The device features
30 banks of 8 scenes each, 6 chases for scene programming and a 4-digit LED display. Check carefully for damage
caused by transportation. Consult your dealer and don’t install this device if it has been damaged in transit.
2. Safety Instructions
• A qualified technician should install and service this device.
• Damage caused by disregarding certain vered by the warranty and the dealer guidelines in this manual is not co
will not accept responsibility for the ensuing defects or problems.
• Do not switch the device on immediately if it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off oom temperature. until it has reached r
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage from sharp edges. Ask an authorised dealer to replace
the cord if necessary.
• Always disconnect the device from the mains when it is not in use or when you wish to clean it. Only handle the
power cord by the plug. Never pull out the plug by tugging the power cord.
• Note that damage caused by user modifications to the device are not covered by the warranty. Keep the device
away from children and unauthorised users.
3. General Guidelines
• This device is a lighting controller for professional use on stage, in discos, theatres, etc. The VDPC145 should
only be used indoors with the included adapter working on an alternating current of max. 230VAC / 50Hz.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device will be protected against extreme heat, moisture and dust.
• Do not use or transport the device under temperatures < 5°C or > 35°C.
• Familiarise yourself with the functions of the device before actually using it. Do not permit operation by unqualified
people. Any damage that may occur will probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• Note that all modifications of the device are forbidden for safety reasons.
• Do not remove the serial number sticker from the device as doing so will void the warranty. Only use the device
for its intended purpose. All other uses may cause short circuits, burns, electroshocks, lamp explosions, crashes,
etc. Using the device in an unauthorised way will void the warranty.
Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
Unplug the mains lead before opening the housing.
VDPC145_v2 VELLEMAN 3
4. Description
a) Front Panel
1. Scanner Buttons
SCANNERS CHANNEL
1 1-16
2 17-32
3 33-48
4 49-64
5 65-80
6 81-96
7 97-112
8 113-128
9 129-144
10 145-160
11 161-176
12 177-192
Press the button to activate the selected scanner (LED is lit). All appropriate channels are ready for use and can be
adjusted.
2. Scene Buttons (1 – 8)
Press a button to run or store a scene. The second digit of the LED display shows scenes 1-8.
3. Faders (1 – 8)
Use the faders to adjust the output level of a DMX channel from 0 to 255. The value will appear on the
LCD display.
4. Page Select
Press this button to switch between page A (the first 8 channels) and page B (the next 8 channels) of
a device.
5. Speed Slider
Adjust the chase speed with this slider (0.1 sec. – 10 min.)
6. Fade Time Slider
Adjust the fade time with this slider (0 – 30 sec.)
Fig. 1
Produktspezifikationen
Marke: | HQ Power |
Kategorie: | Regeln |
Modell: | VDPC145 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit HQ Power VDPC145 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Regeln HQ Power
4 Dezember 2023
Bedienungsanleitung Regeln
- Regeln Da-Lite
- Regeln Gembird
- Regeln Hama
- Regeln HyperX
- Regeln Logitech
- Regeln Manhattan
- Regeln Manta
- Regeln Microsoft
- Regeln Nacon
- Regeln Saitek
- Regeln Sony
- Regeln Speedlink
- Regeln SteelSeries
- Regeln Trust
- Regeln Bosch
- Regeln Canon
- Regeln Hori
- Regeln König
- Regeln Renkforce
- Regeln Pyle
- Regeln Mitsubishi
- Regeln Thermador
- Regeln Denon
- Regeln One For All
- Regeln BeamZ
- Regeln Akai
- Regeln Perel
- Regeln Aruba
- Regeln Thrustmaster
- Regeln TOA
- Regeln Razer
- Regeln Scosche
- Regeln DJI
- Regeln Reely
- Regeln Supermicro
- Regeln Genesis
- Regeln SilverStone
- Regeln Mackie
- Regeln Eurolite
- Regeln Showtec
- Regeln Monacor
- Regeln Ednet
- Regeln Sherwood
- Regeln Lumens
- Regeln Korg
- Regeln DataVideo
- Regeln Manfrotto
- Regeln Tracer
- Regeln Cisco
- Regeln American Audio
- Regeln Kramer
- Regeln Irritrol
- Regeln Vaddio
- Regeln RCA
- Regeln Nintendo
- Regeln Speed-Link
- Regeln Bogen
- Regeln Sonance
- Regeln Rain Bird
- Regeln Sven
- Regeln Fostex
- Regeln PDP
- Regeln Blackmagic Design
- Regeln Ikan
- Regeln Ganz
- Regeln Infinity
- Regeln Logic3
- Regeln Spektrum
- Regeln Steca
- Regeln AMX
- Regeln Universal Remote Control
- Regeln Big Ben
- Regeln Intel
- Regeln Snakebyte
- Regeln RGBlink
- Regeln StarTech.com
- Regeln APart
- Regeln Sonnet
- Regeln Niles
- Regeln Russound
- Regeln Atlas Sound
- Regeln HID Identity
- Regeln ATen
- Regeln Morningstar
- Regeln Chauvet
- Regeln Phoenix Contact
- Regeln OSD Audio
- Regeln DreamGEAR
- Regeln Crestron
- Regeln Atlona
- Regeln LYYT
- Regeln Xantech
- Regeln Sonifex
- Regeln Leviton
- Regeln 8BitDo
- Regeln Adaptec
- Regeln Highpoint
- Regeln Key Digital
- Regeln Aquatic AV
- Regeln Auray
- Regeln Areca
- Regeln Trenton Systems
- Regeln Contour Design
- Regeln Ledxon
- Regeln Kanex
- Regeln LumenRadio
- Regeln Datapath
- Regeln Circle
- Regeln Rachio
- Regeln Victrix
Neueste Bedienungsanleitung für -Kategorien-
10 August 2024
23 Juni 2024
22 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024
21 Juni 2024