HP StorageWorks D2D2502i Bedienungsanleitung
HP
Festplatten-Array
StorageWorks D2D2502i
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HP StorageWorks D2D2502i (27 Seiten) in der Kategorie Festplatten-Array. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/27
Does data growth leave you struggling with complex, distributed, and costly data protection? Keep pace with HP disk-based data
protection.
HP StoreOnce Backup systems with HP StoreOnce deduplication deliver daily onsite backup of small or mid-size data centers, network
efficient remote office protection, rapid data restore and reliable offsite disaster recovery. Offering leading price-performance, you can
start small and upgrade capacity and performance to meet ever shrinking backup windows, while automating data protection to simplify
management, reduce IT intervention, and improve reliability.
All HP StoreOnce Backup systems feature HP StoreOnce deduplication software for efficient, longer term data retention on disk and
enabling network efficient replication for a cost-effective way of transmitting data off-site for disaster recovery purposes. The
StoreOnce Backup systems integrate seamlessly into your current IT environment and offer you the flexibility of both virtual tape
library and NAS targets.
NOTE:
Actual performance is dependent upon data set type, compression levels, number of data streams, number of devices emulated
and number of concurrent tasks, such as housekeeping or replication.
* For legacy D2D backup systems (EJ001A, EJ002A, EH938A, EH939A, EH941A, EH942A, EH999A), the addition of NAS as a target for
backup is limited to the CIFS protocol, suitable for use in Windows-only environments. Earliest legacy systems used authentication
models for the CIFS protocol of "no authentication" or "local user level authentication". There was no support for Microsoft Active
Directory authentication. However support for Microsoft Active Directory authentication is available on legacy systems via a free
firmware upgrade by following the "Support & Drivers" link on
www.hp.com/go/d2d
or by following the "HP Support & Drivers" link
from:
www.hp.com
EJ001C, EJ002C, EH993C EH996B, EH998B, EH985A and EH983B support CIFS, with Microsoft Active Directory
authentication and NFS protocols.
HP D2D2500 Backup system HP D2D4106 Backup system
HP D2D 4106 and D2D4112 Backup system
with D2D4106 or D2D4112/4312 Upgrade Kit
HP D2D4312 and D2D4324 Backup system
QuickSpecs
HP StoreOnce Backup systems
Overview
DA - 13218 Worldwide — Version 18 — September 28, 2012
Page 1
What's New
HP StoreOnce Replication Manager 2.0 allows users to monitor, report and manage multiple StoreOnce backup systems' GUI's
through a single management console.
Replication Manager 2.0 provides an easier way to monitor backup targets showing trends analysis, enhanced topology view and
email alert notification for up to 400 StoreOnce backup systems, being replicated to a central site.
HP D2D4324 Backup system for enterprise data centers delivers a scalable 4U solution from 18 to 72 TB of usable capacity. The
highest capacity and performance* point in the HP StoreOnce Backup system family, it automates the daily backup of multiple
servers through the flexibility of virtual tape library and NAS (CIFS & NFS) interfaces.
HP StoreOnce Open Storage Technology (OST) plug-in integrates deduplicated replication data with Symantec backup
applications
* Actual performance is dependent upon data set type, compression levels, number of data streams, number of devices emulated and
number of concurrent tasks, such as housekeeping or replication.
** Replication Manager 2.0 software is available with the following replication licenses (EH991A, EH994A, EH984A, EH999A and
EH985A).
In order to benefit from Replication Manger, StoreOnce backup systems require the latest firmware, which can be obtained via a free
firmware upgrade by following the "Support & Drivers" link on
www.hp.com/go/d2d
or by following the "HP Support & Drivers" link
from:
www.hp.com
QuickSpecs
HP StoreOnce Backup systems
Overview
DA - 13218 Worldwide — Version 18 — September 28, 2012
Page 2
Make backup easier
HP StoreOnce Backup systems work with your backup application to help automate and improve the
backup process while reducing the time spent managing data protection. Implementing unattended daily
backup to disk is especially valuable for environments with limited IT resources.
Keep pace with data
growth
Most HP StoreOnce Backup systems (apart from the entry level D2D2500 series), allow you to grow usable
capacity as your backup data requirements grow. The D2D4324 allows you to scale up from 18 to 72 TB of
usable capacity, the D2D4312 allows you to scale up from 9 to 36TB of usable capacity, The D2D4112
from 9 to 18 TB of usable capacity and the D2D4106 from 4.5 to 9 TB of usable capacity as your data
storage requirements grow, by using a simple and cost effective capacity upgrade for a lower cost
alternative to purchasing additional systems.
Improve backup
efficiency with data
deduplication
Why continue to store the same data over and over again with each backup? HP StoreOnce deduplication
reduces the disk space required to store backup data sets by typically 20x by eliminating duplicate data
without impacting backup performance. This means that you can retain more backup data on disk for
longer, and enables greater data accessibility for rapid restore of lost or corrupt files.
Meet shrinking backup
windows
StoreOnce Backup systems can simultaneously back up multiple servers on a standard 1 or 10Gb Ethernet
or 4 and 8 Gb Fibre Channel network to a single disk-based solution. With up to 50 backup streams
configured to a single StoreOnce backup system you can achieve backup performance of up to 4TB/hour to
reduce your backup window.
Improve data protection
at remote offices
The HP StoreOnce Backup systems with HP StoreOnce deduplication reduces the network bandwidth
needed to transmit data offsite. This enables cost-effective, network efficient data replication to
automate and centralize backup from remote sites or branch offices Replication manager*, included with
the replication license, provides an easier way to centrally manage a large number of devices being
replicated to a central site.
StoreOnce Backup systems offer an intuitive web-based browser interface allowing you to monitor your
StoreOnce Backup system, locally or remotely, to view results or change settings. This self-managing
device also reduces your routine maintenance.
* Replication Manager software is available with the following replication licenses (EH990A , EH991A,
EH994A, EH984A, EH999A and EH985A). In order to benefit from Replication manger, StoreOnce backup
systems require the latest firmware, which can be obtained via a free firmware upgrade by following the
"Support & Drivers" link on
www.hp.com/go/d2d
or by following the "HP Support & Drivers" link from:
www.hp.com
Deliver reliable disaster
recovery
With HP StoreOnce enabled replication, lower cost transmission inks make network-based disaster
recovery a practical alternative. You can use HP StoreOnce backup systemsto deliver a consolidated
disaster recovery solution for the data center.
Enable rapid file restores
Deduplication means that up to 20x more backup data can be kept on-hand for rapid disk-based file access
and restore to minimize disruption and loss of productivity.
Simplify backup in
complex environments
The StoreOnce Backup systems offer virtual tape library and NAS targets for backup applications allowing
for ease of use and integration in to existing IT environments and provide a way to consolidate data from
QuickSpecs
HP StoreOnce Backup systems
Features and Benefits
DA - 13218 Worldwide — Version 18 — September 28, 2012
Page 3
Produktspezifikationen
| Marke: | HP |
| Kategorie: | Festplatten-Array |
| Modell: | StorageWorks D2D2502i |
Brauchst du Hilfe?
Wenn Sie Hilfe mit HP StorageWorks D2D2502i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Festplatten-Array HP
22 Juli 2024
19 Juli 2024
Bedienungsanleitung Festplatten-Array
- Festplatten-Array Sharkoon
- Festplatten-Array Buffalo
- Festplatten-Array Netgear
- Festplatten-Array Fantec
- Festplatten-Array Hitachi
- Festplatten-Array AIC
- Festplatten-Array Icy Box
- Festplatten-Array Dell
- Festplatten-Array Western Digital
- Festplatten-Array Supermicro
- Festplatten-Array SilverStone
- Festplatten-Array Seagate
- Festplatten-Array Fujitsu
- Festplatten-Array D-Link
- Festplatten-Array QNAP
- Festplatten-Array Synology
- Festplatten-Array Tandberg Data
- Festplatten-Array LaCie
- Festplatten-Array Intel
- Festplatten-Array Sonnet
- Festplatten-Array Vantec
- Festplatten-Array Addonics
- Festplatten-Array HGST
- Festplatten-Array OWC
- Festplatten-Array Rocstor
- Festplatten-Array Raidsonic
- Festplatten-Array G-Technology
- Festplatten-Array Infortrend
- Festplatten-Array Areca
- Festplatten-Array Promise Technology
- Festplatten-Array Glyph
- Festplatten-Array IDIS
- Festplatten-Array IStarUSA
- Festplatten-Array Enhance
- Festplatten-Array Icy Dock
- Festplatten-Array CRU
Neueste Bedienungsanleitung für -Kategorien-
11 Oktober 2024
22 September 2024
18 September 2024
13 September 2024
5 September 2024
5 September 2024
2 September 2024
31 August 2024
31 August 2024
30 August 2024