Hotpoint HIO 3T1239 W E UK Bedienungsanleitung

Hotpoint Geschirrspüler HIO 3T1239 W E UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint HIO 3T1239 W E UK (8 Seiten) in der Kategorie Geschirrspüler. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

DAILY REFERENCE

GUIDE

Before using the appliance carefully read Health and Safety guide.

APPLIANCE

PRODUCT DESCRIPTION

CONTROL PANEL

THANK YOU FOR BUYING A HOTPOINT PRODUCT.

In order to receive a more complete assistance, please

www.hotpoint.eu/register

You can download the Safety Instructions and the

Use and Care Guide, by visiting our website docs.

hotpoint.eu and following the Instructions on the

back of this booklet.

1. On-O/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Delay indicator light

7. Display

8. Zone Wash 3D indicator light

9. Delay button

10. Zone Wash 3D button

11. Tablet (Tab) button with indicator light

1 2 3 4 5 6 7 8 9 10 11

1. Upper rack

2. Foldable aps

3. Upper rack height adjuster

4. Upper spray arm

5. Lower rack

6. Space Zone

7. Cutlery basket

8. Lower spray arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

0000 000 00000

Service:

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the reta-

ining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and

on the machine’s functional components.

• It is important that the salt reservoir be never empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher

(see PRODUCT DESCRIPTION) and should be lled when the SALT

REFILL indicator light in the control panel is lit .

1. Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2. -Only the rst time you do this: ll the salt re

servoir with water.

3. Position the funnel (see gure) and ll the salt

reservoir right up to its edge (approximately

1 kg); it is not unusual for a little water to leak

out.

4. Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the

procedure before the beginning of the washing cycle.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in

your house. This information can be obtained from your local water

supplier.

The factory setting is for avarage (3) water hardness.

•SwitchontheappliancebypressingtheON/OFF button.

•SwitchotheappliancebypressingtheON/OFF button.

•HolddownbuttonP for 5 seconds, until you hear a beep.

•SwitchontheappliancebypressingtheON/OFF button.

•Thecurrentselectionlevelnumberandthesaltindicatorlightboth

ash.

•PressbuttonP to select the desired hardness level (see WATER

HARDNESS TABLE).

•SwitchotheappliancebypressingtheON/OFF button.

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL indi-

cator light switches o.

If the salt container is not lled, the water softener and the

heating element may be damaged as a result.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser shouldA

be lled when the in the controlRINSE AID REFILL indicator light

panel is lit.

1. Open the dispenser by pressing and pulling up the tab on the lidB .

2. Pour in the rinse aid (max.110 ml), making sure it does not overow

from the dispenser. If this happens, clean the spill immediately with a

dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satised with the drying results, you can ad-

just the quantity of rinse aid used.

•SwitchthedishwasheronusingtheON/OFF button.

•SwitchitousingtheON/OFF button.

•PressbuttonP three times - a beep will be heard.

•SwitchitonusingtheON/OFF button.

•Thecurrentselectionlevelnumberandrinseaidindicatorlightash.

•PressbuttonP to select the level of rinse aid quantity to be

supplied.

•SwitchitousingtheON/OFF button

Setting is complete!

If the rinse aid level is set to ZERO (ECO), no rinse aid will be supplied. The

LOW RINSE AID indicator light will not be lit if you run out of rinse aid.

A maximum of 5 levels can be set according to the dishwasher model. The

factory setting is specic to the model, please follow instruction above

to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes, set a

mid-range number (3-4).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser

use the opening device A. Introduce

the detergent into the dry dispenser

B only. Place the amount of

detergent for pre-washing directly

inside the tub.

1. When measuring out the detergent re-

fer to the mentioned earlier information

to add the proper quantity. Inside the

dispenser B there are indications to help

the detergent dosing.

2. Remove detergent residues from the edges of the dispenser and

close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until the

closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the program.

If all-in-one detergents are used, we recommend using the TABLET

button, because it adjusts the program so that the best washing and

drying results are always achieved.

Water Hardness Table

Level °dH

German degrees

°fH

French degrees

1 Soft 0 - 6 0 - 10

2 Medium 7 - 11 11 - 20

3 Average 12 - 17 21 - 30

4 18 - 34 31 - 60Hard

5 Very hard 35 - 50 61 - 90

PROGRAMS TABLE

Instructions on wash cycle selection.

ECO

Normally soiled crockery. Standard program, the most ecient in

terms of its combined energy and water consumption.

AUTO INTENSIVE

Automatic program for heavily soiled dishes and pans (not to be used

for delicate items).

AUTO NORMAL

Automatic program for normally soiled pans and dishes.

FAST

Program for limited quantity of normally soiled crockery.

Ensures optimal cleaning performance in shorter time.

EXPRESS 30’

Program to be used for lightly-soiled dishes with no dried food

residues.

GOOD NIGHT

Suitable for night-time operation of the appliance. Ensures optimal

cleaning and drying performance with the lowest noise emission.

SANITIZING

Normally or heavily soiled crockery, with additional antibacterial wash.

Can be used to perform maintenance of the dishwasher.

SOAK

Use to refresh crockery planned to be washed later. No detergent to be

used with this program.

SELF-CLEAN

Program to be used to perform maintenance of the dishwasher.

It cleans the interior of the appliance using hot water.

Notes:

Please note that cycles like Express Fastor are most eective for lightly

soiled dishes.

To reduce consumption even further, only run the dishwasher

when it is full.

PROGRAMS DESCRIPTION

ECO program data is measured under laboratory conditions according to European Standard EN 50242. Note for Test Laboratories: For information on

comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary

depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,

load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.

Standby consumption: Left-on mode consumption: 6 W - O mode consumption: 0.5 W

Program

Drying

ActivEco

Available

options *)

Detergent

container Duration

of wash

program

(h:min)**)

Water con-

sumption

(litres/

cycle)

Energy con-

sumption

(kWh/cycle)

Tub B

1. Eco 50° 3:10 9,5 0,93

2. Auto Intensive 65° - - 2:00 - 3:10 14 - 17,0 1,50 - 1,85

3. Auto Normal 55° 1:30 - 2:30 14,5 - 16 1,15 - 1,30

4. Fast 50° - - - 1:00 12-13 1,15

5. Express 30’ 50° - - - 0:30 9 0,55

6. Good Night 50° - - 3:30 15 1,15

7. Sanitizing 65° - - 1:40 10 1,30

8. Soak - - - - - 0:12 4,5 0,01

9. Self- Clean 65° - - - - 0:50 8 0,85

Produktspezifikationen

Marke:	Hotpoint
Kategorie:	Geschirrspüler
Modell:	HIO 3T1239 W E UK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint HIO 3T1239 W E UK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Geschirrspüler Hotpoint

Hotpoint HFO 3C23 WF UK Bedienungsanleitung

14 Oktober 2024

Hotpoint LTF 11M121 C Ultima Bedienungsanleitung

9 Oktober 2024

Hotpoint FDFL 11010 G Aquarius Bedienungsanleitung

13 Juli 2024

Hotpoint LFF 8M121 C Bedienungsanleitung

13 Juli 2024

Hotpoint HIO 3T1239 W E UK Bedienungsanleitung

12 Juli 2024

Hotpoint FDUD 51110 P Ultima Bedienungsanleitung

12 Juli 2024

Hotpoint HSIE 2B19 UK Bedienungsanleitung

11 Juli 2024

Hotpoint FDUD 43133 P Ultima Bedienungsanleitung

11 Juli 2024

Hotpoint HDFO 3C24 W C UK Bedienungsanleitung

9 Juli 2024

Hotpoint HFE 2B+26 C N UK Bedienungsanleitung

9 Juli 2024

Bedienungsanleitung Geschirrspüler

Neueste Bedienungsanleitung für -Kategorien-

Zanker KDV10010FA Bedienungsanleitung

16 Oktober 2024

Amana ADB3500AWW41 Bedienungsanleitung

16 Oktober 2024

Sharp QW-AT13S47E-DE Bedienungsanleitung

16 Oktober 2024

Zanker GW 3752 B Bedienungsanleitung

16 Oktober 2024

Teco TDW14SA Bedienungsanleitung

16 Oktober 2024

Amana ADB3500AWS41 Bedienungsanleitung

16 Oktober 2024

Defy DDW 173 Bedienungsanleitung

16 Oktober 2024

Blomberg DWT 25100 B Bedienungsanleitung

16 Oktober 2024

Freggia DWCI4108 Bedienungsanleitung

16 Oktober 2024

Equator WP818 Bedienungsanleitung

15 Oktober 2024