Hotpoint CD67G0C2CA/UK Bedienungsanleitung

Hotpoint Herde CD67G0C2CA/UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint CD67G0C2CA/UK (8 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

CD67G0CCX/UK

CD67G0C2CJ/UK

CD67G0C2CA/UK

ADAPTING TO DIFFERENT TYPES OF GAS

(This operation needs to be carried out by a

qualified technician.)

In order to adapt the appliance to a type of gas

other than the type for which it was manufactured

(indicated ontherating label), follow thededicated

steps provided after installation drawings.

ELECTRICAL WARNINGS

IMPORTANT: Information about current and

voltage consumption is provided on the rating

plate.

The rating plate is on the front edge of the

oven (visible when the door is open).

It must be possible to disconnect the appliance

from the power supply by unplugging it if

plug is accessible, or by a multi-pole switch

installed upstream of the socket in accordance

with the wiring rules and the appliance must

be earthed in conformity with national electrical

safety standards.

The power cable must be long enough to connect the appliance,

once fitted in its housing, to the main power supply. Do not pull the

power supply cable.

Do not use extension leads, multiple sockets

or adapters. The electrical components must not

be accessible to the user after installation. Do not

use the appliance when you are wet or barefoot.

Do not operate this appliance if it has a damaged

power cable or plug, if it is not working properly,

or if it has been damaged or dropped.

If the supply cord is damaged, it must

be replaced with an identical one by the

manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard -

risk of electric shock.

If the power cable needs to be replaced,

contact an authorised service centre.

CLEANING AND MAINTENANCE

WARNING: Ensure that the appliance is

switched off and disconnected from the power

supply before performing any maintenance

operation; never use steam cleaning equipment -

risk of electric shock.

Do not use harsh abrasive cleaners or metal

scrapers to clean the door glass since they can

scratch the surface, which may result in shattering

of the glass.

Do not use abrasive or corrosive products,

chlorine-based cleaners or pan scourers.

Make sure the appliance has cooled down

before cleaning or performing maintenance. - risk

of burns.

WARNING: Switch off the appliance before

replacing the lamp - risk of electric shock.

To avoid damaging the electric ignition device, do not use it when

the burners are not in their housing.

Wear protective gloves for cleaning and

maintenance.

DISPOSAL OF PACKAGING MATERIALS

ENERGY SAVING TIPS

Only preheat the oven if specified in the cooking table

dark lacquered or enamelled baking trays as they

to save even more energy and time.

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance meets: Ecodesign requirements of European

Regulation 66/2014; Energy Labelling Regulation 65/2014;

Products and Energy Information (Amendment) (EU Exit)

Regulations (2019), in compliance with the European standard:

EN 15181. This appliance meets Ecodesign requirements

Energy-Related Products and Energy Information

(Amendment) (EU Exit) Regulations 2019 in compliance

with the European standard EN 30-2-1.

DECLARATION OF CONFORMITY

Ecodesign for Energy-Related

of European Regulation 66/2014 and the Ecodesign for

The packaging material is 100 % recyclable

and is marked with the recycle symbol .

The various parts of the packaging must therefore

be disposed of responsibly and in full compliance

with local authority regulations governing

waste disposal .

This appliance is manufactured with recyclable or

reusable materials. Dispose of it in accordance

with local waste disposal regulations . For further information

contact your local authority, the collection service for household

waste or the store where you purchased the appliance.

This appliance is marked in compliance with

The European Directive 2012/19/EU, Waste Electrical and

Electronic Equipment ( WEEE ) and with the

Waste Electrical and Electronic Equipment regulations 2013

( as amended ) . By ensuring this product is disposed

of correctly , you will help prevent negative consequences

for the environment and human health . The ed , symbol

on the product or on the accompanying documentation

indicates that it should not be treated as domestic

waste but must be taken to an appropriate

collection centre for the recycling of electrical and

electronic equipment.

on the treatment, recovery and recycling of household

household electrical appliances,

or your recipe. Use dark lacquered or enamelled

absorb heat better. Use a pressure cooker

• Pry the fixing tab “V” and remove the oven burner

• Unscrew the oven burner nozzle using the socket

spanner for the nozzles “Z”“Z”

“Z”“Z”“Z”, or a 7 mm socket

spanner, and replace it with a nozzle suited to the

new type of gas (see Table 1).

Take particular care handling the spark plug

wires and the thermocouple pipes.

• Replace all the parts, following the steps

described above in the reverse order.

b )b )

b ) Minimum regulation of the main and top gas

oven burner with thermostat:

• light the burner as described in the

paragraph the oven knob” of the

instruction booklet.

• turn the knob to MaxMax

MaxMaxMax for about 10 minutes

and then turn the knob to the MinMin

MinMin

Min

setting;

• remove the knob;

• regulate the screw positioned outside the

thermostat pin until the flame is

small but steady.

! !

! ! In the case of liquid gas, the regulation screw

must be screwed in to the bottom.

• check that the burner does not turn off whenwhen

you turn the knob from Max to Min and and

when you open and close the oven door quickly.

Adapting the gas grill to different types of gas

Replacing the nozzle of the grill burner:

On completion of the operation, replace the old

rating sticker with one indicating the new type of gas

used. This sticker is available from our Service

Centres.

No t eNo t e

No t eNo t eNo t e

Should the pressure of the gas used be different (or

vary) from the recommended pressure, it is

necessary to fit a suitable pressure regulator onto

the inlet pipe in compliance with current National

Regulations relative to “regulators for channelled

gas”.

If the appliance is connected to a liquid gas supply, the

bypass screw must be set to a minimum.

While the burner is alight, quickly change the position of the

knob from minimum to maximum and vice versa several times,

checking that the flame is not extinguished.

Upon completion of adjustment, reseal using sealing

wax or an equivalent material.

1. Remove the enamelled baffle at the front of the grill

(2 screws).

2. Remove the screw on the right hand side of the

burner and gently slide the burner off the injector.

3. Using a 7mm socket, replace the grill injector as

appropriate (see table on previous page).

4. Re-assemble the burner and baffle.

Adapting to different types of gas (main and top

oven)

In order to adapt the oven to a different type of gas

with respect to the gas for which it was

manufactured (indicated on the label), follow these

simple steps:

a)a)a)a)a) Replacing the oven burner nozzle

•open the oven door fully

•pull out the sliding oven bottom

unscrew the two screws and take o the shield

protecting the burner (in main oven burner only).

