Honeywell ST9500C Bedienungsanleitung
Honeywell
Temperaturregeln
ST9500C
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell ST9500C (1 Seiten) in der Kategorie Temperaturregeln. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
Guide to the Use of the ST9500C Programmer
This user guide is for guidance only and at the time of production represented the latest information available to Honeywell from various sources.
Honeywell reserves the right at any time and without notice to change any product, specification or any other information contained in this publication and
cannot accept any responsibility for loss or damage arising out of any errors that may inadvertently be contained herein.
EN2H-2101 UK01 R1009
honeywelluk.com
How do I use the OVERRIDE buttons?
There are two OVERRIDE buttons, one for ZONE
1 and one for ZONE 2 (marked on the image).
To turn ZONE 1 on and override the set
programme press the ZONE 2 OVERRIDE button
marked in the picture. The indicator light will light
up to confirm ZONE 1 is on.
To turn ZONE 1 off again press the OVERRIDE
button.
Alternatively the next time the programmer is set
to switch on or off the override will be cancelled.
The OVERRIDE button will only work in the AUTO
and ONCE modes. It will NOT work in the OFF or
CONT modes. To change the mode press the
button marked ‘A’ for and ‘B’ for ZONE 1 ZONE 2
in the picture. Each time you press the button it will
move through the list of modes above it.
To override ZONE 2 follow the same instructions
as above but with the ZONE 2 override button
marked in the picture.
How do I use the EXTRA HOUR buttons?
There are two EXTRA HOUR buttons, one for
ZONE 1 and one for ZONE 2 (marked on the
image).
Press the button once to bring ZONE 1 or ZONE 2
on for 1 hour. Press the button a second time to
bring them on for 2 hours and a third for 3 hours.
To turn the override off press the button a fourth
time.
The EXTRA HOUR button will only work in the
AUTO, ONCE and OFF modes. It will NOT work in
the CONT mode. To change the mode press the
button marked ‘A’ for ‘B’ for ZONE 1 and ZONE 2
in the picture. Each time you press the button it will
move through the list of modes above it.
CONT
ONCE
OF F
EXTRA HOUR
OVERRIDE
EXTRA HOUR
ZONE 1 ZONE 2
OVERRIDE
CONT
ONCE
AUTO AUTO
OF F
CONT
ONCE
OF F
EXTRA HOUR
OVERRIDE
EXTRA HOUR
ZONE 1 ZONE 2
OVERRIDE
CONT
ONCE
AUTO AUTO
OF F
Zone 1
EXTRA HOUR
Zone 2
EXTRA HOUR
Zone 2
OVERRIDE
Zone 1
OVERRIDE
Zone 1
indicator light
Zone 2
indicator light
A
B
List of
modes for
Zone 2
List of
modes for
Zone 1
Produktspezifikationen
| Marke: | Honeywell |
| Kategorie: | Temperaturregeln |
| Modell: | ST9500C |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Honeywell ST9500C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Temperaturregeln Honeywell
30 Dezember 2023
25 November 2023
5 November 2023
5 November 2023
3 November 2023
11 September 2023
8 Juli 2023
16 Mai 2023
24 April 2023
24 April 2023
Bedienungsanleitung Temperaturregeln
- Temperaturregeln Panasonic
- Temperaturregeln AEG
- Temperaturregeln Techno Line
- Temperaturregeln Technoline
- Temperaturregeln Ventus
- Temperaturregeln Kathrein
- Temperaturregeln Dimplex
- Temperaturregeln JUNG
- Temperaturregeln Carel
- Temperaturregeln Fluke
- Temperaturregeln AstralPool
- Temperaturregeln SRS
- Temperaturregeln Emko
- Temperaturregeln Jumo
Neueste Bedienungsanleitung für -Kategorien-
28 Mai 2024
28 Mai 2024
24 Mai 2024
3 Mai 2024
9 April 2024
31 März 2024
13 März 2024
7 März 2024
24 Februar 2024
21 Februar 2024