Honeywell HY-013 Comfort Control Bedienungsanleitung

Honeywell Ventilator HY-013 Comfort Control

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell HY-013 Comfort Control (18 Seiten) in der Kategorie Ventilator. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/18
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Use this fan only as described in this
manual. Other use not recommended as it
may cause fire, electric shock or injury to
persons.
2. This product is intended for household use
ONLY and not for commercial, industrial or
outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
4. This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended to
fit only one way in a polarized outlet. If the
plug does not fitfully in the outlet, reverse
the plug. If it still does not fit,contact a
qualified electrician.Do not attempt to
defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall
outlet. Never pull the plug by the cord.
8 Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or an parts near any
open flame, cooking or other heating
appliance.
10. Do not operate the fan with a damaged
cord or plug or if the product
malfunctions, is dropped or damaged in
any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dr level surface.y
14. Do not hang or mount fan on a wall or
ceiling.
15. Do not operate if the fan housing is
damaged.
16. A loose fit between the AC outlet
(receptacle) and plug may cause over
heating and a distortion of the plug.
Contact a qualified electrician to replace
loose or worn outlet.
WARNING: To Reduce The Risk of Fire
or Electric Shock,Do Not Use This Fan
With Any Solid-State Speed Control
Device.
TOWER FAN
Model DY-012 Series
Model HY-013 Series
Owner’s Manual
DY-012_HY-013_OM.qxd 10/17/08 10:47 AM Page 1
NOTE: Remove all contents from the box being careful not to discard
the manual and hardware needed for assembly. A phillips head screw
driver ( ) is required for assembly and is not included with the fan
purchase.
A. Base Assembly
• Gently turn the fan upside down.
• Place the power cord through the recessed channel located in the
center of the rear base assembly (Fig 1).
• Align the rear and front base assembly and firmly snap together by
pushing the 4 round extrusion into the adjacent circles of the
connecting pieces (Fig 2).
B. Securing the Tower Fan to the Base
• Using the 3 (M5 x 12) screws and phillips head screw driver ( )
secure the base into the bottom portion of the fan housing by
aligning the 3 screw holes on the base with the 3 screw holes on
the bottom of the fan housing (Fig 3).
• Gently pull any slack out of the power cord and place the cord
securely in the power cord
holding bracket (Fig. 4).
• Place the fan right side up.
Your fan is now ready
for use.
DY-012 SERIES ASSEMBLY INSTRUCTIONS
Fig. 3 Fig. 4
Fig. 2
Fig. 1
DY-012 SERIES OPERATION INSTRUCTIONS
• Be sure your fan is in the
OFF position by pressing
the off button. ( )
• Place the fan on a level and
dr surface.y
• Plug the power cord into a
polarized 120 Volt AC wall
outlet.
• To operate, press the
appropriate speed control
option: High ( ), Medium ( ), or Low ( ) (Fig. 5).
• To activate or disengage the fan oscillation, press the oscillation button ( ) (Fig 6).
• To turn the fan OFF ( ) press the Off button once.
Fig. 5 Fig. 6
DY-012_HY-013_OM.qxd 10/17/08 10:47 AM Page 2
NOTE: Remove all contents from the box being careful not to discard the manual and hardware needed for
assembly. A phillips head screw driver ( ) is required for assembly and is not included with the fan
purchase.
A. Pedestal Assembly
• Place the power cord through the center of the front and rear
pedestal assemblies with the screw hole openings facing towards
the fan.
• Align the front and rear pedestal assembly and firmly snap
together (Fig 7).
B. Securing the Tower Fan to the Pedestal
• Gently turn fan upside down.
• Line up the 3 screw holes on the pedestal with the 3 screw
holes on the bottom of the fan housing. Use the 3 (M5 x 12)
screws included in the box and a phillips head screw driver ( )
to secure the pedestal to the fan housing (Fig. 8).
C. Base Assembly
• With the fan in the upside down position, pass the power cord
through the recessed slot located in the center of the rear base
assembly (Fig 9).
• Align the rear and front base assembly and firmly snap together by
pushing the 4 round extrusion into the adjacent circles of the
connecting pieces (Fig 10).
D. Securing the Tower
Fan to the Base
• Align the 3 screw holes in
the bottom of the pedestal
with the 3 screw holes
loca Usingted on the base.
the 3 (M5 x 12) screws
and phillips head screw
driver ( ), secure the
base into the bottom
portion of the fan housing
(Fig 11).
• Place the power cord
through the cut out on the
bottom of the base. Gently
pull any slack out of the
power cord and place the
cord securely in the power
cord holding bracket
(Fig. 12).
• Place the fan right side up. Your fan is now ready for use.
HY-013 SERIES ASSEMBLY INSTRUCTIONS
Fig. 10
Fig. 11 Fig. 12
Fig. 9
Fig. 7
Fig. 8
DY-012_HY-013_OM.qxd 10/17/08 10:47 AM Page 3

Produktspezifikationen

Marke: Honeywell
Kategorie: Ventilator
Modell: HY-013 Comfort Control

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell HY-013 Comfort Control benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ventilator Honeywell

Honeywell

Honeywell HT-900E Bedienungsanleitung

9 Oktober 2024
Honeywell

Honeywell HT-904 Bedienungsanleitung

2 Oktober 2024
Honeywell

Honeywell Turbo Force HT-900G Bedienungsanleitung

4 September 2024
Honeywell

Honeywell QuietSet HTF210 Bedienungsanleitung

2 September 2024
Honeywell

Honeywell CL40 Bedienungsanleitung

30 August 2024
Honeywell

Honeywell Sunset Key 10288 Bedienungsanleitung

28 August 2024
Honeywell

Honeywell Wicker Park 10268 Bedienungsanleitung

28 August 2024
Honeywell

Honeywell Elston 10290 Bedienungsanleitung

28 August 2024
Honeywell

Honeywell Eastover 10214 Bedienungsanleitung

28 August 2024
Honeywell

Honeywell Glen Alden 50183 Bedienungsanleitung

28 August 2024

Bedienungsanleitung Ventilator

Neueste Bedienungsanleitung für -Kategorien-

Duux

Duux DXFH02 Bedienungsanleitung

16 Oktober 2024
Duux

Duux DXCF12 Whisper Flex Bedienungsanleitung

16 Oktober 2024
Orbegozo

Orbegozo PW 1321 Bedienungsanleitung

11 Oktober 2024
Air King

Air King E130SH Bedienungsanleitung

10 Oktober 2024
Thermex

Thermex Silent 100 CZ Bedienungsanleitung

8 Oktober 2024
Master

Master BLM 4800 Bedienungsanleitung

8 Oktober 2024
Hema

Hema 80.06.0005 Bedienungsanleitung

5 Oktober 2024
Imarflex

Imarflex IF-375BU Bedienungsanleitung

2 Oktober 2024
Imarflex

Imarflex IF-365BK Bedienungsanleitung

2 Oktober 2024
Solis

Solis Charge & Go Fan 7586 Bedienungsanleitung

2 Oktober 2024