Honeywell Chage-Only Base COB02 Bedienungsanleitung
Honeywell
Barcode-Leser
Chage-Only Base COB02
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell Chage-Only Base COB02 (9 Seiten) in der Kategorie Barcode-Leser. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/9
Charge-Only Base
COB02
Installation Guide
Rev B
9/15
Introduction
Honeywell’s Charge-Only Base can fully charge an industrial
wireless area-imaging scanner in 5 hours, maximizing uptime in any
application.
Note: When a scanner is placed into the Charge-Only Base, the
battery will charge. Please note that the Charge-Only Base
will not facilitate communication with the host system or other
scanners.
Installation
Connect the power adapter to the Charge-Only Base, then plug the
power supply into an AC power outlet. Make sure the AC power
outlet voltage is the same as the power supply.
Use only a Listed Limited Power Source (LPS) or Class 2 type
power supply with output rated 5 to 5.2Vdc, 1A. We recommend
use of Honeywell power adapters. Use of any non-Honeywell
power adapters may cause damage not covered by the
warranty.
Mounting a COB02 Base
The COB02 Base can be mounted on either a horizontal or vertical
surface. The cable can be routed through either the top or the bottom
of the base.
The cable can be routed down through the bottom of the base,
securing the cable in the wireway.
The cable can also be routed up through the top of the base, but must
be crossed over and secured in the wireway.
When routing the cable up through the top of the base, be sure to
cross the cable over before placing in the wireway. If not, too much
strain is placed on the cable connector.ï€
Produktspezifikationen
Marke: | Honeywell |
Kategorie: | Barcode-Leser |
Modell: | Chage-Only Base COB02 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Honeywell Chage-Only Base COB02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Barcode-Leser Honeywell
21 Februar 2024
11 Februar 2024
11 Januar 2024
3 Januar 2024
30 Dezember 2023
29 Dezember 2023
21 Dezember 2023
11 Dezember 2023
30 November 2023
16 November 2023
Bedienungsanleitung Barcode-Leser
- Barcode-Leser Manhattan
- Barcode-Leser König
- Barcode-Leser Renkforce
- Barcode-Leser Olympia
- Barcode-Leser Intermec
- Barcode-Leser Zebra
- Barcode-Leser Digitus
- Barcode-Leser HTC
- Barcode-Leser IFM
- Barcode-Leser Datalogic
- Barcode-Leser Posiflex
- Barcode-Leser Newland
- Barcode-Leser Atlantis Land
- Barcode-Leser Socket Mobile
- Barcode-Leser Adesso
- Barcode-Leser Unitech
- Barcode-Leser CipherLab
- Barcode-Leser Code Corporation
- Barcode-Leser Hamlet
- Barcode-Leser Psion
- Barcode-Leser POS-X
- Barcode-Leser Qoltec
Neueste Bedienungsanleitung für -Kategorien-
17 April 2024
17 April 2024
15 April 2024
14 April 2024
10 April 2024
5 April 2024
24 März 2024
22 März 2024
22 März 2024
5 März 2024