Homak Security HS30103660 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Homak Security HS30103660 (12 Seiten) in der Kategorie Gewölbe. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
OWNER’S MANUAL &
OPERATING INSTRUCTIONS
GUIDE D’UTILISATION ET
DIRECTIVES DE
FONCTIONNEMENT
GUÍA DE UTILIZACIÓN Y
DIRECTIVAS DE
FUNCIONAMIENTO
8 GUN STEEL SECURITY CABINET - BLACK
CABINET DE SÉCURITÉ EN ACIER
POUR 8 ARMES À FEU - NOIR
GABINETE DE SEGURIDAD DE ACERO PARA 8
ARMAS DE FUEGO - NEGRO
Model / Modèle / Modelo : HS30103660
This is not a toy. This is not intended for use by children.
Cet article n’est pas un jouet et n’est pas destiné aux enfants.
Este artículo no es un juguete. No está destinado al uso de los niños
CAUTION:
Read all Instructions and safety tips before using this product.
ATTENTION :
Lire toutes les directives et conseils de sécurité avant d’utiliser ce produit.
ATENCIÓN :
Leer todas las instrucciones y las reglas de seguridad antes de utilizar este
producto.
- 2 -
THANK YOU FOR PURCHASING A
HOMAK SECURITY PRODUCT.
WE APPRECIATE YOUR BUSINESS.
Congratulations on your new purchase!
Inside your gun cabinet, you will nd the following items:
A) Keys D) 4 Screws
B) Foam Components E) 4 Washers
C) Plastic Barrel Rest Kit F) 2 Bins
Locate this instruction manual and keep in a safe place after
reading thoroughly. The factory key code can be found printed
on the back page of this manual. If this code is lost, please call
1-800-874-6625 for assistance.
1. Install the cabinet
Locate the four washers and
screws. Place the cabinet in
a suitable location aligning
the holes on the back of the
cabinet with two studs in the
wall that are 16” apart.
Pre-drill the holes into the
studs before permanently
installing cabinet.
NOTE: This cabinet is not
designed to be used without
securing it to a wall or other
surface. It may tip over.
MECHANICAL ASSEMBLY
Door
Lock Cylinders
Mounting Holes
- 3 -
B
Foam
Components
C
BARREL REST
MOUNTING BAR
2. Foam Component
The foam part is shown below. The part has been designed to t into the
bottom of the cabinet. Carefully, remove the paper backing revealing the
adhesive backing and place neatly into the bottom of the cabinet. Once
the backing has been removed and the foam is attached, it can not be
removed without damage.
Decide the height that you will place the barrel rest. From this measure-
ment cut the back wall foam into two pieces at the height that you will
place the barrel rest. Any extra that is left may be placed above the barrel
rest on the back wall.
Back Wall
Foam
Bottom


Produktspezifikationen

Marke: Homak Security
Kategorie: Gewölbe
Modell: HS30103660

Brauchst du Hilfe?

Wenn Sie Hilfe mit Homak Security HS30103660 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Gewölbe Homak Security

Bedienungsanleitung Gewölbe

Neueste Bedienungsanleitung für -Kategorien-