Homak Security HS30103630 Bedienungsanleitung

Homak Security Sicher HS30103630

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Homak Security HS30103630 (12 Seiten) in der Kategorie Sicher. Dieser Bedienungsanleitung war fĂŒr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
OWNER’S MANUAL &
OPERATING INSTRUCTIONS
GUIDE D’UTILISATION ET
DIRECTIVES DE
FONCTIONNEMENT
GUÍA DE UTILIZACIÓN Y
DIRECTIVAS DE
FUNCIONAMIENTO
12 GUN STEEL SECURITY CABINET - BLACK
CABINET DE SÉCURITÉ EN ACIER
POUR 12 ARMES À FEU - NOIR
GABINETE DE SEGURIDAD DE ACERO PARA 12
ARMAS DE FUEGO - NEGRO
Model / ModĂšle / Modelo : HS30103630
This is not a toy. This is not intended for use by children.
Cet article n’est pas un jouet et n’est pas destinĂ© aux enfants.
Este artículo no es un juguete. No estå destinado al uso de los niños
CAUTION:
Read all Instructions and safety tips before using this product.
ATTENTION :
Lire toutes les directives et conseils de sĂ©curitĂ© avant d’utiliser ce produit.
ATENCIÓN :
Leer todas las instrucciones y las reglas de seguridad antes de utilizar este
producto.
- 2 -
THANK YOU FOR PURCHASING A
HOMAK SECURITY PRODUCT.
WE APPRECIATE YOUR BUSINESS.
Congratulations on your new purchase!
Inside your gun cabinet, you will ïŹ nd the following items:
A) Keys D) 4 Screws
B) Foam Components E) 4 Washers
C) Plastic Barrel Rest Kit F) 3 Bins
Locate this instruction manual and keep in a safe place after
reading thoroughly. The factory key code can be found printed
on the back page of this manual. If this code is lost, please call
1-800-874-6625 for assistance.
1. Install the cabinet
Locate the four washers and
screws. Place the cabinet in
a suitable location aligning
the holes on the back of the
cabinet with two studs in the
wall that are 16” apart.
Pre-drill the holes into the
studs before permanently
installing cabinet.
NOTE: This cabinet is not
designed to be used without
securing it to a wall or other
surface. It may tip over.
MECHANICAL ASSEMBLY
Door
Lock Cylinders
Mounting Holes
- 3 -
B
Foam
Components
C
BARREL REST
MOUNTING BAR
2. Foam Component
The foam part is shown below. The part has been designed to ïŹ t into
the cabinet. Carefully, remove the paper backing revealing the adhesive
backing and place neatly into the cabinet. Once the backing has been
removed and the foam is attached, it can not be removed without
damage.
Decide the height that you will place the barrel rest. From this measure-
ment cut the back wall foam into two pieces at the height that you will
place the barrel rest. Any extra that is left may be placed above the barrel
rest on the back wall.
Back Wall
Foam
Left
Side
Foam
Right
Side
Foam
Bottom


Produktspezifikationen

Marke: Homak Security
Kategorie: Sicher
Modell: HS30103630

Brauchst du Hilfe?

Wenn Sie Hilfe mit Homak Security HS30103630 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten