Hikvision DS-QAZ1110G1-B Bedienungsanleitung

Hikvision Nicht kategorisiert DS-QAZ1110G1-B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-QAZ1110G1-B (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Network Cabinet Speaker

Quick Start Guide

UD32572B

About this Manual

The Manual includes instructions for using and managing the Product. Pictures, charts,

images and all other information hereinafter are for description and explanation only. The

information contained in the Manual is subject to change, without notice, due to firmware

updates or other reasons. Please find the latest version of this Manual at the Hikvision

website (https://www.hikvision.com/).

Please use this Manual with the guidance and assistance of professionals trained in

supporting the Product.

Trademarks

and other Hikvision’s trademarks and logos are the properties of Hikvision in

various jurisdictions.

Other trademarks and logos mentioned are the properties of their respective

owners.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE

PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED

“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,

SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE

PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU

FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,

AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER

BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT

SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,

HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,

HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND

YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A

MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA

PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY

PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS

OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR

EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE

LAW, THE LATTER PREVAILS.

Appearance and Interface

• The primary speaker and secondary speaker have similar appearance, but different interfaces.

◦ The primary speaker has interfaces on the top and a c

onstant resistance output

interface on

the rear panel.

◦ The secondary speaker has no interface on the top, but has a c

onstant resistance input

interface on the rear panel.

• The debug port is for purpose of debugging only.

• Speakers of certain models are designed with a SIM card slot. The actual device prevails.

• Speakers of certain models are designed with a constant resistance output interface. The

actual device prevails.

• The interface varies with the models. Please refer to the product datasheet for details.

Dimensions Rear Panel-Primary Speaker Rear Panel-Secondary Speaker

Top Interfaces-Primary Speaker

158 mm (6.22")

181 mm (7.13")

280 mm (11.02")

*Constant Resistance Output Constant Resistance Input

Power Input Interface

Audio Input Interface

*SIM Card Slot

Constant Pressure Input Interface

Network Interface

Reset

Volume Control

Debug Port

Switch the power off before installation.

A mounting template is required for device installation. It is recommended to install the device

at a distance of 3.24 m~6.24 m from the ground and ≥ 0.69 m from the ceiling.

Complete the wiring of the device before installation. See Chapter 1 for detailed information.

Make sure that the power supply complies with the needs of the device. Please refer to the

product datasheet for details.

Preparation Before Installation

Note

100 mm(3.94")

60 mm(2.36")

3Installation

321

Network Speaker Screws Mounting Template

Wall

Wall Mount

Stick the mounting template to the wall according to actual installation needs.

Drill holes according to the screw holes of the template, and insert the expansion screws into the holes.

Fix the two screws in the screw holes and leave an 8 mm gap between the screws and the wall.

Hang the device stably on the wall by aligning the hanging holes of the device with the screws to complete the installation.

Quick Setup

6Regulatory Information

Scan the QR Code to Get User Manual

You should activate the device before the first login. After powering on the device, the system will switch to

Device Activation page.

You can use the secondary speaker directly after connecting it to the main speaker and powering them up.

Primary Speaker

Secondary Speaker

1. Make sure the device IP address and the computer's should be in the same IP segment.

2. Enter the device default IP address (192.0.0.64) in the address bar of the web browser, and press .Enter

3. If you have more than one device in your network, please change the IP address of the device to prevent the abnormal access caused by IP

address confilict. After logging in to the device, you can go to -> -> ->Configuration Network Network Settings TCP/IP, and modify the IP

address, subnet mask, gateway and other parameters.

We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds

of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your

product.

▷Activate via Web Browser

1. Go to Configuration Network Network Settings TCP/IP-> -> -> for

parameter settings.

2. Network Parameter Settings

- Manually enter the , ,IPv4 Address IPv4 Subnet Mask IPv4 Default

Gateway Preferred DNS Address Alternate Address, and .

- Check to obtain the parameters automatically.Auto DNS

3. Click .Save

1. Go to Configuration Broadcast Settings Library-> -> to import

broadcast materials.

2. Go to Configuration Broadcast Settings Scheduled Broadcast-> ->

Settings to create scheduled broadcast.

▷Network Settings ▷Broadcast Settings

For more information about settings, see .User Manual

These clauses apply only to the products bearing the corresponding mark or information.

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated

with minimum distance 20cm between the radiator & your body.

EU Conformity Statement

This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European

standards listed under Directive 2014/53/EU (RED), the Directive 2014/30/EU (EMCD), Directive 2011/65/EU (RoHS).

Note: The products with the input voltage of within 50 to 1000 VAC or 75 to 1500 VDC comply with Directive 2014/35/EU (LVD), and the rest products comply

with Directive 2001/95/EC (GPSD). Please check the specific power supply information for reference.

Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.

For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated

collection points. For more information see: www.recyclethis.info.

Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux

conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

ce matériel est conforme aux limites de dose d'exposition aux rayonnements, CNR-102 énoncée dans un autre environnement.cette eqipment devrait

être installé et exploité avec distance minimale de 20 entre le radiateur et votre corps.

Safety Instruction

Caution

Note

• In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.

• If the device supports wall mounting, the mounting surface shall be able to withstand the additional force of three times the weight of the device but not less than 50 N.

The device and its associated mounting means shall remain secure during the installation. After the installation, the device, including any associated mounting plate, shall

not be damaged. Refer to datasheet for details.

• If the device is intended to be moved or used in a certain direction, keep the required direction when moving or using the device. Refer to datasheet for details.

• CAUTION: If the device needs to be installed with a specific bracket of our company, use the corresponding bracket only. Use others (such as carts, stands, and carriers)

may result in instability and cause injury. Refer to the device datasheet for bracket model details. Refer to datasheet for details.

• For the device with sound playing function, to prevent possible hearing damage, do not listen at high volume levels for long periods. Refer to the datasheet for details.

• Refer to the device label for the standard power supply. Please make sure your power supply matches with your device.

• Make sure that the power has been disconnected before you wire, install, or disassemble the device.

• To avoid heat accumulation, good ventilation is required for a proper operating environment.

• If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.

• If the product does not work properly, please contact your dealer or the nearest service center. Never attempt to disassemble the product yourself. We shall not assume

any responsibility for problems caused by unauthorized repair or maintenance.

Warning

• For the battery with + and - signs, + identifies the positive terminals of the device which is used with or generates direct current, and - identifies the negative terminals of

the device which is used with or generates direct current.

• No naked flame sources, such as lighted candles, should be placed on the equipment.

• If the serial port of the device is used for debugging only, it is reserved only for professionals or technical support for device maintenance. Refer to the document for

details.

• Attach the device properly to the floor/wall in accordance with the installation instructions to prevent injury. Refer to the document for details.

• DO NOT drop the product or subject it to physical shock. Do not install the product on vibratory surface or places.

• DO NOT expose the device to high electromagnetic radiation.

• DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp environments. For temperature and humidity requirements, refer to the

datasheet for details.

• DO NOT install indoor product where it may get wet by water or other liquid.

• To avoid fire hazard or electric shock, DO NOT expose the device to rain or extremely damp environments.

• Accessing to the Internet may cause network security problems. Please strengthen the protection of your personal information and data security. When you find that the

device may have network security risks, please contact us in time.

• Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

• Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper.

Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities.

• This installation should be made by a qualified service person and should conform to all the local codes.