Hikvision DS-PK1-E-WE Bedienungsanleitung
Hikvision
Alarmanlage
DS-PK1-E-WE
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-PK1-E-WE (4 Seiten) in der Kategorie Alarmanlage. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change,
without noce, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng the Product.
and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Appearance
1
2Indicaon
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the EMC Direcve 2014/30/EU, the RE
Direcve 2014/53/EU, the RoHS Direcve 2011/65/EU.
replacement of a baery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium
baery types);
– disposal of a baery into fire or a hot oven, or mechanically crushing or cung of a baery, that can result in an
explosion;
– leaving a baery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; and
– a baery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid
or gas
Fault
Fire Alarm
Relay Control
Disarm
Away Arm
Stay Arm
Panic Alarm
Medical Alarm
Armed/Disarmed
Enrollment/Signal Strength
Enrollment
Wake up with Fault
LED Indicaon Descripon
Buzzer Descripon
Armed
Wake up while armed
Disarmed
Arming Failed
Disarming Failed
Operaon completed: Beep twice
Operaon failed: Beep three mes
Solid orange for 10 s .
Solid blue for 5 s
Solid blue for 10 s
Green flashes 2 mes
Blue turns Off
Green turns Off
Tampering Alarm
No Alarm
Event Alarm
Note: Event Alarm Priority > Tampering Alarm Priority
Solid red
Off
Flashing red
OffNo Fault
Signal
Strength
Find Me
Power On
Back Light
-If the keypad is not enrolled to the control panel, the back light is off.
-It turns off when there is no key operaon for more than 10 s.
Alarm
Tamper Switch
Power Switch
Serial Port
Connual green (3 s) and off (3 s): Strong
Connual green and red (3 s) and off (3 s): Medium
Connual Red (3 s) and off (3 s): Weak
Connual flashing red (3 s) and off (3 s): Lost
Flashing red and green: Enrolling
Green flashes 7 mes: Enrolled
Enrolled: Solid green for 1 s: Powered on
Flashing red: Operang
Turns off when over me (3 min)
or control panel power off
-The back light is on by default, you can set the On/Off schedule on the web
client of the control panel. Refer to the user manual of control panel for
details.
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentaon for specific baery informaon. The baery is marked
with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the baery to your supplier or to a designated collecon point. For more informaon see:www.recy-
clethis.info
1
CAUTION
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE.
REPLACEMENT OF A BATTERY
WITH AN INCORRECT TYPE THAT
CAN DEFEAT A SAFEGUARD.
CAUTION
CHEMICAL BURNING DANGER
DO NOT SWALLOW THE
BATTERY
KEEP NEW AND USED
BATTERIES AWAY FROM THE
CHILDREN.
IF YOU THINK BATTERIES MIGHT
HAVE BEEN SWALLOWED OR
PLACED INSIDE ANY PART OF
THE BODY, SEEK IMMEDIATE
MEDICAL ATTENTION.
CAUTION
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUC-
TIONS AND LOCAL REGULATION.
CAUTION
WHILE REPLACE THE BATTERIES,
REPLACE ALL FOUR BATTERIES
AT THE SAME TIME, AND DO
NOT MIX OLD AND NEW
BATTERIES.
DS-PK1-E-WE
Wireless LED Keypad EN50131-1:2006+A1:2009+A2:2017
EN 50131-3:2009
EN 50131-5-3:2017
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Security Grade(SG) 2
Environmental Class(EC) II
Cerfied by Teleficaon
3Enrollment
4Installaon
2. Aach the front panel onto the rear panel.
Note: The addional force shall be equal to three mes the weight of the equipment but not less than 50N. The equipment
and its associated mounng means shall remain secure during the installaon. Aer the installaon, the equipment, including
any associated mounng plate, shall not be damaged.
1. Secure the rear panel on the wall with
four supplied screws. 3. Tighten the screw on the boom
to complete the installaon.
Enroll the Peripheral Locally
Enroll the Peripheral with QR Code or Serial No.
1. In the APP, tap the "Enrollment Mode" buon on the control panel page to make the control panel enter the enroll-
ment status.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
1. In the APP, tap the icon "+"and scan the QR code or enter the serial No. on the peripheral.
2. Push the power switch of the peripheral to on, and it will be automacally enrolled to the control panel.
1. Remove the screw on the boom of the keypad.
2. Disassemble the keypad and remove the rear panel.
3. Power on the security control panel.
4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.
5. Enroll the peripheral locally, with OR code, or with serial No..
Remove the screw on the boom of the keypad.
Disassemble the keypad and remove the rear panel. Scan the QR code on the rear panel of the keypad. Push the power switch to ON.
Check signal strength and select installaon place
Enter the signal checking mode by operang on the control panel.
Connual green (3 s) and off (3 s): Strong
Connual green and red (3 s) and off (3 s): Medium
Connual Red (3 s) and off (3 s): Weak
Connual flashing red (3 s) and off (3 s): Lost
2
CAUTION
IF THE BATTERY COMPARTMENT
DOES NOT CLOSE SECURELY,
STOP USING THE PRODUCT AND
KEEP IT AWAY FROM CHILDREN.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Command
5
8
The keypad command is shown as follows.
Even de ets Co s Not s
Away ar ing or all areasm f :
User assword p + Away
Away ar ing or s eci ed m f p fi area:
User assword p + # Area+
N ( 3 4 5 6 7 9 )o. 1,2. . . . . .8. .010.011.012....
+ away
The key ad does not dis lay area o. greater than .- p p N 9
-If the area o. is greater than , enter 0 or the o..N 9 " XX"f N "0 indicates"
tens digits, and indicates the actual area o."XX" N
-If the selected area is not related to the key ad,the back light willp of “0”
S m ftay ar ing or all areas:
User assword p + tayS
S m ftay ar ing or s eci ed p fi area:
User assword p + # Area+
N ( 3 4 5 6 7 9 )o. 1,2. . . . . .8. .010.011.012....
+ S tay
The key ad does not dis lay area o. greater than .- p p N 9
-If the area o. is greater than , enter 0 or the o..N 9 " XX"f N "0 indicates"
tens digits, and indicates the actual area o."XX" N
-If the selected area is not related to the key ad, the back light p of “0” will
flashes three es.m
Disar ing or all m f areas:
User assword p + Disarm
Disar ing or s eci ed m f p fi area:
User assword p + # Area+
N ( 3 4 5 6 7 9 )o. 1,2. . . . . .8. .010.011.012....
+ m Disar
The key ad does not dis lay area o. greater than .- p p N 9
-If the area o. is greater than , enter 0N 9 " XX"for the o..N "0 indicates"
tens digits, and indicates the actual area o."XX" N
-If the selected area is not related to the key ad, the back light p of “0” will
flashes three es.m
Clear alar ser asswordm U P +Hold Disarm
F " /F m" fire Hold 1 ire Alar or s The uzzer will bee three es 3 B p m for ailure o era on.f p
P " /P m" fA Hold 2 anic Alar or s The uzzer will bee three es 3 B p m for ailure o era on.f p
Medical Hold Medical or s The uzzer will bee three es "3/ " f 3 B p m for ailure o era on.f p
Duress Duress Code( )+disarm
You can set the duress code on the web client o the control anel. ef p R fer to
the user anual o control anel or details.m f p f
For further informaon see the control panel AX PRO manual.
O put ut
User asswordP +O p +ut ut relay
N ( 3 4 5 6 7 9 )+o. 1,2. . . . . .8. .010.011.012....
＃
-If the relay o. is greater than , enter 0 or the o..N 9 " XX" f N " "0 indicates tens
digits, and indicates the actual relay o."XX" N
A co and e ecu on i le ent an o era on - successful mm x mp m p "Off" or n ."O "
Away arm
S mtay ar
Disarm
4
Operaon
Keypad Status
Sleep Status
Working Status
Enrollment Status
Free Status
The keypad will enter the sleep status
while meeng the following condions:
No RF data transmission
No key operaon for more than 10 s
No keypad tampering alarm
No polling
No beeping
No LED indicaon
The keypad will enter the sleep status while
meeng the following condions:
RF data transmission
key operaon
keypad tampering alarm
polling
Beeping
LED indicaon
While the keypad is enrolled to a control
panel, it enters the enrollment status.
Only if the keypad is enrolled, the key
operaon and status indicaon take
effects.
There is no area related to the keypad.
The key and back light do not works.
6
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
*
Aer you add one keypad, you can add PIN code (Keypad Password) in the user menu. When you click in the input box, there will be
indicaon shows that 4 to 6 numbers allowed (for 4 numbers there will be 10,000 differs (no disallowed combinaons)). For further
informaon see the control panel AX PRO manual. This is the same for each user.
*
Produktspezifikationen
| Marke: | Hikvision |
| Kategorie: | Alarmanlage |
| Modell: | DS-PK1-E-WE |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hikvision DS-PK1-E-WE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Alarmanlage Hikvision
1 September 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
Bedienungsanleitung Alarmanlage
- Alarmanlage Basetech
- Alarmanlage Hama
- Alarmanlage Nedis
- Alarmanlage Brennenstuhl
- Alarmanlage Bosch
- Alarmanlage Velleman
- Alarmanlage Eminent
- Alarmanlage IKEA
- Alarmanlage Schwaiger
- Alarmanlage König
- Alarmanlage Renkforce
- Alarmanlage Blaupunkt
- Alarmanlage Schneider
- Alarmanlage Dometic
- Alarmanlage Pyle
- Alarmanlage Vivanco
- Alarmanlage Abus
- Alarmanlage Elro
- Alarmanlage EZVIZ
- Alarmanlage Imou
- Alarmanlage Olympia
- Alarmanlage Smartwares
- Alarmanlage Yale
- Alarmanlage Gigaset
- Alarmanlage Burg Wächter
- Alarmanlage Honeywell
- Alarmanlage Redmond
- Alarmanlage Doro
- Alarmanlage Kodak
- Alarmanlage Techly
- Alarmanlage Schellenberg
- Alarmanlage Xavax
- Alarmanlage Monacor
- Alarmanlage FireAngel
- Alarmanlage Kidde
- Alarmanlage Optex
- Alarmanlage Aritech
- Alarmanlage Desq
- Alarmanlage M-e
- Alarmanlage Eufy
- Alarmanlage Grothe
- Alarmanlage EVOLVEO
- Alarmanlage Ring
- Alarmanlage Swann
- Alarmanlage Chuango
- Alarmanlage Electia
- Alarmanlage Somfy
- Alarmanlage KlikaanKlikuit
- Alarmanlage Protector
- Alarmanlage Steren
- Alarmanlage Woonveilig
- Alarmanlage X4-Tech
- Alarmanlage Vimar
- Alarmanlage Dahua Technology
- Alarmanlage Tzumi
- Alarmanlage FBT
- Alarmanlage Pentatech
- Alarmanlage Olymp
- Alarmanlage Chacon
- Alarmanlage Kemo
- Alarmanlage ORNO
- Alarmanlage DSC
- Alarmanlage Cordes
- Alarmanlage Schabus
- Alarmanlage Qolsys
- Alarmanlage Gripo
- Alarmanlage ETiger
- Alarmanlage ConiuGo
- Alarmanlage Bearware
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
3 Oktober 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024
30 September 2024