Hikoki M6SB Bedienungsanleitung
Hikoki
Rasentrimmer
M6SB
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Hikoki M6SB (13 Seiten) in der Kategorie Rasentrimmer. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/13
Trimmer
Model M 6SB
Handling instructions
Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available
as an important reference when using this power tool.
2
G
ENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating
a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common
sense when operating a power tool.
Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection.
Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used.
Use of dust collection can reduce dust related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
The correct power tool will do the job better and safer
at the rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infirm persons away.
When not in use, tools should be stored out of reach of children and
infirm persons.
3
PRECAUTIONS ON USING TRIMMER
1. Always use the bit of correct shank diameter suitable
for the speed of the tool.
2. Hold the body firmly during operation. Otherwise,
injuries can result.
3. The bit is very hot immediately after operation.
Avoid bare hand contact with the bit for any reason.
4. Avoid bringing your hand, face, etc., close to the
bit and rotary parts during operation.
5. Exercise caution as the bit remains rotating even
after the switch is turned off. Contact of your hand,
etc., with the rotating bit can result in injuries.
SPECIFICATIONS
*Be sure to check the nameplate on product as it is subject to change by areas.
Voltage (by areas)* (110 V, 230 V, 240 V)
Power Input* 440 W
No-load speed 30000/min
Collet Chuck Capacity 6 mm or 6.35 mm (1/4")
Weight (Only main body) 1.4 kg
STANDARD ACCESSORIES
(1) Trimmer guide ass'y ................................................ 1
(2) Straight Guide ........................................................... 1
(3) Template Guide (with two M4 screws) ................ 1
(4) Wrench 17/19 mm .................................................... 1
Standard accessories are subject to change without
notice.
APPLICATIONS
䡬
Plywood trimming
䡬Various beveling
䡬Various grooving
䡬Engraving
䡬Cut offs
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the
power switch is in the ON position, the power tool
will start operating immediately, which could cause
a serious accident.
3. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
4. Fitting the bit
Refer to "Fitting and removal of the bit" section
given in the following. It is dangerous if the bit is
not fitted to the coIlet chuck securely. Check if the
collet chuck is sufficiently tightened.
5. Cutting using the workpiece edge as a base line
(Fig. 1)
Note that the distance between the machine center
and the hollow differs from the other three distances.
Fig. 1
6. Confirm the spindle lock mechanism.
Confirm that the spindle lock is disengaged by
pushing the push button two or three times before
switching the power tool on. (See Fig. 2)
Fig. 2
7. RCD
The use of a residual current device with a rated
residual current of 30mA or less at all times is
recommended.
45mm 45mm
Hollow
Top view
Tighten
Collet chunk
Loosen
Spindle lock Bit
46mm 52mm
Produktspezifikationen
| Marke: | Hikoki |
| Kategorie: | Rasentrimmer |
| Modell: | M6SB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hikoki M6SB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Rasentrimmer Hikoki
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
23 August 2024
11 August 2024
3 August 2024
Bedienungsanleitung Rasentrimmer
- Rasentrimmer Medion
- Rasentrimmer Philips
- Rasentrimmer Hanseatic
- Rasentrimmer Cotech
- Rasentrimmer Makita
- Rasentrimmer Adler
- Rasentrimmer Camry
- Rasentrimmer Bosch
- Rasentrimmer Parkside
- Rasentrimmer Vonroc
- Rasentrimmer OK
- Rasentrimmer Black And Decker
- Rasentrimmer Cocraft
- Rasentrimmer FERM
- Rasentrimmer Ryobi
- Rasentrimmer Skil
- Rasentrimmer Topcraft
- Rasentrimmer Braun
- Rasentrimmer Alpina
- Rasentrimmer DeWalt
- Rasentrimmer Einhell
- Rasentrimmer Worx
- Rasentrimmer Pyle
- Rasentrimmer GAM
- Rasentrimmer MACH
- Rasentrimmer Olympia
- Rasentrimmer Hitachi
- Rasentrimmer Hyundai
- Rasentrimmer Fuxtec
- Rasentrimmer Kress
- Rasentrimmer Kärcher
- Rasentrimmer Atika
- Rasentrimmer GĂĽde
- Rasentrimmer Levita
- Rasentrimmer LĂĽmme
- Rasentrimmer Meec Tools
- Rasentrimmer Fieldmann
- Rasentrimmer BaByliss
- Rasentrimmer Remington
- Rasentrimmer Husqvarna
- Rasentrimmer Stihl
- Rasentrimmer Dedra
- Rasentrimmer Graphite
- Rasentrimmer Pattfield
- Rasentrimmer Snow Joe
- Rasentrimmer Honda
- Rasentrimmer Silverline
- Rasentrimmer Florabest
- Rasentrimmer Germania
- Rasentrimmer Grouw
- Rasentrimmer Hecht
- Rasentrimmer Stiga
- Rasentrimmer Greenworks
- Rasentrimmer Robust
- Rasentrimmer Batavia
- Rasentrimmer Dolmar
- Rasentrimmer Milwaukee
- Rasentrimmer Toolcraft
- Rasentrimmer AL-KO
- Rasentrimmer EGO
- Rasentrimmer Gardena
- Rasentrimmer CMI
- Rasentrimmer Royal Sovereign
- Rasentrimmer Innoliving
- Rasentrimmer HSM
- Rasentrimmer Verto
- Rasentrimmer Wolf Garten
- Rasentrimmer Craftsman
- Rasentrimmer Defort
- Rasentrimmer Powerplus
- Rasentrimmer SereneLife
- Rasentrimmer Echo
- Rasentrimmer Martha Stewart
- Rasentrimmer McCulloch
- Rasentrimmer Ozito
- Rasentrimmer Yard Force
- Rasentrimmer Sun Joe
- Rasentrimmer Draper
- Rasentrimmer Solo
- Rasentrimmer Texas
- Rasentrimmer VARO
- Rasentrimmer Spear & Jackson
- Rasentrimmer Efco
- Rasentrimmer ELECTROLUX FLYMO PARTNER McCULLOCH
- Rasentrimmer ELECTROLUX McCULLOCH
- Rasentrimmer Eurogarden
- Rasentrimmer Ferrex
- Rasentrimmer Fiskars
- Rasentrimmer Fleurelle
- Rasentrimmer Flymo
- Rasentrimmer Gamma
- Rasentrimmer Garden Feelings
- Rasentrimmer Gardenline
- Rasentrimmer Gardol
- Rasentrimmer Goon
- Rasentrimmer Grizzly
- Rasentrimmer HammerSmith
- Rasentrimmer HURRICANE
- Rasentrimmer Lux Tools
- Rasentrimmer Mac Allister
- Rasentrimmer McGregor
- Rasentrimmer Mr Gardener
- Rasentrimmer MTD
- Rasentrimmer Partner
- Rasentrimmer Plantiflor
- Rasentrimmer Qualcast
- Rasentrimmer Shindaiwa
- Rasentrimmer Sterwins
- Rasentrimmer Tanaka
- Rasentrimmer Top Garden
- Rasentrimmer Toro
- Rasentrimmer Troy-Bilt
- Rasentrimmer Wingart
- Rasentrimmer Powerworks
- Rasentrimmer Sovereign
- Rasentrimmer Challenge
- Rasentrimmer Challenge Xtreme
- Rasentrimmer Truper
- Rasentrimmer Palmera
- Rasentrimmer MacAllister
- Rasentrimmer Jonsered
- Rasentrimmer G-Technology
- Rasentrimmer Gute Wahl
- Rasentrimmer Proviel
- Rasentrimmer Budget
- Rasentrimmer Anova
- Rasentrimmer Yellow Garden Line
- Rasentrimmer LawnMaster
- Rasentrimmer Ergotools Pattfield
- Rasentrimmer IKRA
- Rasentrimmer Bestgreen
- Rasentrimmer Central Park
- Rasentrimmer Krausmann
- Rasentrimmer Maruyama
- Rasentrimmer Maxbear
Neueste Bedienungsanleitung fĂĽr -Kategorien-
16 Oktober 2024
14 Oktober 2024
14 Oktober 2024
12 Oktober 2024
11 Oktober 2024
10 Oktober 2024
1 Oktober 2024
1 Oktober 2024
24 September 2024
23 September 2024