Hikoki CJ90VST2 Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Hikoki CJ90VST2 (48 Seiten) in der Kategorie SĂ€ge . Dieser Bedienungsanleitung war fĂŒr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/48
Model
ModĂšle
Modelo CJ 90VST2 Jig Saw
Scie sauteuse
Sierra de calar
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE DâEMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraßner la
mort ou de sérieuses blessures corporelles !
Ce mode dâemploi contient dâimportantes informations Ă propos de la sĂ©curitĂ© de ce produit.
PriĂšre de lire et de comprendre ce mode dâemploi AVANT dâutiliser lâoutil motorisĂ©. Garder ce
mode dâemploi Ă la disponibilitĂ© des autres utilisateurs et propriĂ©taires avant quâils utilisent
lâoutil motorisĂ©. Ce mode dâemploi doit ĂȘtre conservĂ© dans un endroit sĂ»r.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¥La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene informaciĂłn importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
2
English
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all of the safety precautions, warnings and operating instructions in the instruction manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the âSAFETYâ section of this instruction manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identiïŹ ed by WARNINGS on the power
tool and in this instruction manual.
Never use this power tool in a manner that has not been speciïŹ cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and speciïŹ cations provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, ïŹ re and/or serious injury.
Save all warnings and instructions for future reference.
The term âpower toolâ in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ïŹ ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
UnmodiïŹ ed plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3
English
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inïŹ uence of drugs, alcohol or
medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as a dust mask, non-
skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the oïŹ -position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your ïŹ nger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-related
hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles.
A careless action can cause severe injury within a
fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and oïŹ .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may aïŹ ect the power toolÊŒs operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the power tool for operations diïŹ erent
from those intended could result in a hazardous
situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
5) Service
a) Have your power tool serviced by a
qualiïŹ ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and inïŹ rm persons away.
When not in use, tools should be stored out of reach
of children and inïŹ rm persons.
SPECIFIC SAFETY RULES AND SYMBOLS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring.
Cutting accessory contacting a âliveâ wire may make
exposed metal parts of the power tool âliveâ and could
give the operator an electric shock.
2. Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body leaves
it unstable and may lead to loss of control.
Produktspezifikationen
| Marke: | Hikoki |
| Kategorie: | SĂ€ge |
| Modell: | CJ90VST2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hikoki CJ90VST2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung SĂ€ge Hikoki
21 Mai 2024
20 Mai 2024
29 MĂ€rz 2024
5 MĂ€rz 2024
29 Februar 2024
27 Februar 2024
23 Februar 2024
19 Februar 2024
4 Februar 2024
27 Januar 2024
Bedienungsanleitung SĂ€ge
- SĂ€ge Panasonic
- SĂ€ge Cotech
- SĂ€ge Makita
- SĂ€ge Bosch
- SĂ€ge Parkside
- SĂ€ge Vonroc
- SĂ€ge AEG
- SĂ€ge Powerfix
- SĂ€ge Black And Decker
- SĂ€ge Cocraft
- SĂ€ge FERM
- SĂ€ge Ryobi
- SĂ€ge Skil
- SĂ€ge Trotec
- SĂ€ge Hilti
- SĂ€ge Bort
- SĂ€ge DeWalt
- SĂ€ge Einhell
- SĂ€ge Elu
- SĂ€ge Festool
- SĂ€ge Mafell
- SĂ€ge Triton
- SĂ€ge Worx
- SĂ€ge Tacklife
- SĂ€ge Hitachi
- SĂ€ge Hyundai
- SĂ€ge Hazet
- SĂ€ge Kress
- SĂ€ge Metabo
- SĂ€ge Stanley
- SĂ€ge KĂ€rcher
- SĂ€ge Atika
- SĂ€ge GĂŒde
- SĂ€ge Power Craft
- SĂ€ge Scheppach
- SÀge Bébé Confort
- SĂ€ge Workzone
- SĂ€ge Meec Tools
- SĂ€ge Dremel
- SĂ€ge Fieldmann
- SĂ€ge King Craft
- SĂ€ge Proxxon
- SĂ€ge Westfalia
- SĂ€ge Remington
- SĂ€ge Husqvarna
- SĂ€ge Stihl
- SĂ€ge Chicago Pneumatic
- SĂ€ge Dedra
- SĂ€ge Graphite
- SĂ€ge Snow Joe
- SĂ€ge Silverline
- SĂ€ge Holzmann
- SĂ€ge Sthor
- SĂ€ge Florabest
- SĂ€ge Hecht
- SĂ€ge Herkules
- SĂ€ge Stiga
- SĂ€ge Ford
- SĂ€ge Zipper
- SĂ€ge Yato
- SĂ€ge Baumr-AG
- SĂ€ge Greencut
- SĂ€ge Genesis
- SĂ€ge Evolution
- SĂ€ge Dolmar
- SĂ€ge Bavaria
- SĂ€ge Milwaukee
- SĂ€ge Narex
- SĂ€ge Toolcraft
- SĂ€ge Fein
- SĂ€ge AL-KO
- SĂ€ge Gardena
- SĂ€ge Craftsman
- SĂ€ge Defort
- SĂ€ge Powerplus
- SĂ€ge Alpha Tools
- SĂ€ge Martha Stewart
- SĂ€ge McCulloch
- SĂ€ge Ozito
- SĂ€ge Yard Force
- SĂ€ge Sun Joe
- SĂ€ge Draper
- SĂ€ge Solo
- SĂ€ge Texas
- SĂ€ge Ridgid
- SĂ€ge Porter-Cable
- SĂ€ge Hobart
- SĂ€ge Guede
- SĂ€ge Dexter Power
- SĂ€ge Felisatti
- SĂ€ge Gardenline
- SĂ€ge Grizzly
- SĂ€ge Homelite
- SĂ€ge HURRICANE
- SĂ€ge Plantiflor
- SĂ€ge Qualcast
- SĂ€ge Shindaiwa
- SĂ€ge Sterwins
- SĂ€ge Tanaka
- SĂ€ge Troy-Bilt
- SĂ€ge Meister Craft
- SĂ€ge Sovereign
- SĂ€ge Challenge
- SĂ€ge Challenge Xtreme
- SĂ€ge Truper
- SĂ€ge MacAllister
- SĂ€ge RIKON
- SĂ€ge Pro-Cut
- SĂ€ge Selion
- SĂ€ge Kreg
- SĂ€ge Proviel
- SĂ€ge Merox
- SĂ€ge Bullcraft
- SĂ€ge XU1
- SĂ€ge MTM
- SĂ€ge Urrea
- SĂ€ge EFA
- SĂ€ge MyTool
- SĂ€ge Ergotools Pattfield
- SĂ€ge IKRA
- SĂ€ge FIXIT
- SĂ€ge Bavaria By Einhell
- SĂ€ge Rona
- SĂ€ge Donau Elektronik
Neueste Bedienungsanleitung fĂŒr -Kategorien-
14 August 2024
7 August 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024