Hikoki CB3612DA Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Hikoki CB3612DA (93 Seiten) in der Kategorie SĂ€ge . Dieser Bedienungsanleitung war fĂŒr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/93
Model
ModĂšle
Modelo
CB 3612DA
Cordless Band Saw
Scie Ă ruban sans-ïŹ l
Sierra de cinta inalĂĄmbrica
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE DâEMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraßner la
mort ou de sérieuses blessures corporelles !
Ce mode dâemploi contient dâimportantes informations Ă propos de la sĂ©curitĂ© de ce produit.
PriĂšre de lire et de comprendre ce mode dâemploi AVANT dâutiliser lâoutil motorisĂ©. Garder ce
mode dâemploi Ă la disponibilitĂ© des autres utilisateurs et propriĂ©taires avant quâils utilisent
lâoutil motorisĂ©. Ce mode dâemploi doit ĂȘtre conservĂ© dans un endroit sĂ»r.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¥La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene informaciĂłn importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
2
English
IMPORTANT SAFETY INSTRUCTIONS
Read all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or
maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identiïŹ ed by WARNINGS on the power
tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been speciïŹ cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, ïŹ re and/or serious injury.
Save all warnings and instructions for future reference.
The term âpower toolâ in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ïŹ ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
UnmodiïŹ ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inïŹ uence of drugs, alcohol or
medication.
3
English
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the oïŹ -position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools with your ïŹ nger on the switch
or energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left attached to a rotating part of
the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and oïŹ .
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may aïŹ ect the
power toolâs operation.
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the power tool for operations diïŹ erent
from those intended could result in a hazardous
situation.
5) Battery tool use and care
a) Recharge only with the charger speciïŹ ed by
the manufacturer.
A charger that is suitable for one type of battery
pack may create a risk of ïŹ re when used with
another battery pack.
b) Use power tools only with speciïŹ cally
designated battery packs.
Use of any other battery packs may create a risk of
injury and ïŹ re.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another.
Shorting the battery terminals together may cause
burns or a ïŹ re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, ïŹ ush with water.
If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause irritation
or burns.
6) Service
a) Have your power tool serviced by a
qualiïŹ ed repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is
maintained.
âWARNINGâ
To reduce the risk of injury, user must read
instruction manual.
Produktspezifikationen
| Marke: | Hikoki |
| Kategorie: | SĂ€ge |
| Modell: | CB3612DA |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hikoki CB3612DA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung SĂ€ge Hikoki
21 Mai 2024
20 Mai 2024
29 MĂ€rz 2024
5 MĂ€rz 2024
29 Februar 2024
27 Februar 2024
23 Februar 2024
19 Februar 2024
4 Februar 2024
27 Januar 2024
Bedienungsanleitung SĂ€ge
- SĂ€ge Panasonic
- SĂ€ge Cotech
- SĂ€ge Makita
- SĂ€ge Bosch
- SĂ€ge Parkside
- SĂ€ge Vonroc
- SĂ€ge AEG
- SĂ€ge Powerfix
- SĂ€ge Black And Decker
- SĂ€ge Cocraft
- SĂ€ge FERM
- SĂ€ge Ryobi
- SĂ€ge Skil
- SĂ€ge Trotec
- SĂ€ge Hilti
- SĂ€ge Bort
- SĂ€ge DeWalt
- SĂ€ge Einhell
- SĂ€ge Elu
- SĂ€ge Festool
- SĂ€ge Mafell
- SĂ€ge Triton
- SĂ€ge Worx
- SĂ€ge Tacklife
- SĂ€ge Hitachi
- SĂ€ge Hyundai
- SĂ€ge Hazet
- SĂ€ge Kress
- SĂ€ge Metabo
- SĂ€ge Stanley
- SĂ€ge KĂ€rcher
- SĂ€ge Atika
- SĂ€ge GĂŒde
- SĂ€ge Power Craft
- SĂ€ge Scheppach
- SÀge Bébé Confort
- SĂ€ge Workzone
- SĂ€ge Meec Tools
- SĂ€ge Dremel
- SĂ€ge Fieldmann
- SĂ€ge King Craft
- SĂ€ge Proxxon
- SĂ€ge Westfalia
- SĂ€ge Remington
- SĂ€ge Husqvarna
- SĂ€ge Stihl
- SĂ€ge Chicago Pneumatic
- SĂ€ge Dedra
- SĂ€ge Graphite
- SĂ€ge Snow Joe
- SĂ€ge Silverline
- SĂ€ge Holzmann
- SĂ€ge Sthor
- SĂ€ge Florabest
- SĂ€ge Hecht
- SĂ€ge Herkules
- SĂ€ge Stiga
- SĂ€ge Ford
- SĂ€ge Zipper
- SĂ€ge Yato
- SĂ€ge Baumr-AG
- SĂ€ge Greencut
- SĂ€ge Genesis
- SĂ€ge Evolution
- SĂ€ge Dolmar
- SĂ€ge Bavaria
- SĂ€ge Milwaukee
- SĂ€ge Narex
- SĂ€ge Toolcraft
- SĂ€ge Fein
- SĂ€ge AL-KO
- SĂ€ge Gardena
- SĂ€ge Craftsman
- SĂ€ge Defort
- SĂ€ge Powerplus
- SĂ€ge Alpha Tools
- SĂ€ge Martha Stewart
- SĂ€ge McCulloch
- SĂ€ge Ozito
- SĂ€ge Yard Force
- SĂ€ge Sun Joe
- SĂ€ge Draper
- SĂ€ge Solo
- SĂ€ge Texas
- SĂ€ge Ridgid
- SĂ€ge Porter-Cable
- SĂ€ge Hobart
- SĂ€ge Guede
- SĂ€ge Dexter Power
- SĂ€ge Felisatti
- SĂ€ge Gardenline
- SĂ€ge Grizzly
- SĂ€ge Homelite
- SĂ€ge HURRICANE
- SĂ€ge Plantiflor
- SĂ€ge Qualcast
- SĂ€ge Shindaiwa
- SĂ€ge Sterwins
- SĂ€ge Tanaka
- SĂ€ge Troy-Bilt
- SĂ€ge Meister Craft
- SĂ€ge Sovereign
- SĂ€ge Challenge
- SĂ€ge Challenge Xtreme
- SĂ€ge Truper
- SĂ€ge MacAllister
- SĂ€ge RIKON
- SĂ€ge Pro-Cut
- SĂ€ge Selion
- SĂ€ge Kreg
- SĂ€ge Proviel
- SĂ€ge Merox
- SĂ€ge Bullcraft
- SĂ€ge XU1
- SĂ€ge MTM
- SĂ€ge Urrea
- SĂ€ge EFA
- SĂ€ge MyTool
- SĂ€ge Ergotools Pattfield
- SĂ€ge IKRA
- SĂ€ge FIXIT
- SĂ€ge Bavaria By Einhell
- SĂ€ge Rona
- SĂ€ge Donau Elektronik
Neueste Bedienungsanleitung fĂŒr -Kategorien-
14 August 2024
7 August 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
28 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024
26 Juni 2024