HELGI HLG0388SDI Bedienungsanleitung

HELGI AV extender HLG0388SDI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HELGI HLG0388SDI (4 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

SDI Cabl e TV

Connection instruction:

1). Connect SDI input with SDI source device and connect IR blaster

extension cable with IR OUT interface of the sender (TX).

2). Connect SDI output with SDI display device and connect IR

receiver extension cable with IR IN interface.

3). Power on the device (power led lights) and it works.

Note:

1） When the wireless signal transmits through wall, glass or other

obstacles, it will cause signal loss. Suggest installing this device in

good environment with few obstacles.

2） The external environment wireless signal interfere the transmission,

such as micro waver, wireless mouse and keyboard etc.

Specification

SDI signal SD SDI HD SDI 3G SDI- , - , -

Support resolution

SD-SDI 480i： @60Hz 576i， @50Hz

HD-SDI 720p： @50/60Hz 1080i， @50/60Hz,1080p@24/25/30Hz

3G-SDI 1080p： @50/60Hz

Transmit distance 200m

IR remote control Sup port 20~60kH z wide frequency IR remote device

Working temperature 0℃ 60℃～

Power supply DC5V/3A *2PCS

Power consumption TX: 13W; RX: 11W

Product dimension

Weight

Color

195.5(W) x 138.5(D) x 32(H)mm *2PCS

Items

Black

TX: 575g RX:575g

Enclosure material Metal

Transport protocol HDbitT

•Connection

SDI Extender

TX sender

SDI Extender

RX receiver

•FAQ

Q: TV display “waiting for connection” on the bottom right corner?

A: Please check if the power supply of TX (sender) and RX(receiver) is well

connected and the power indicator led lights on.

Q: TV display “Please check the TX input signal”?

A: 1) please check if there is an SDI signal input of sender TX

2) Try to connect the signal source directly to display device to see if there

is signal output from source device or change the signal source, SDI

cables and try again.

Q: Display not fluent and stable?

A: 1) Please move the position of sender (TX) and receiver (RX) and make sure

the device is within the required scope of the signal.

2) Press“reset” button on the RX/RX panel, reset and reconnect.

3) Remove other wireless signal disturbance and reduce the obstacles on

the way.

•Specification

The product name and brand name may be registered trademark of related

manufacturers.TM and ® may be omitted on the user manual. The pictures

on the user manual are just for reference,and there may be some slight

difference with the real products.

We reserve the rights to make changes without further notice to a product

or system described herein to improve reliability, function or design.

Disclaimer

SDI Cabl e

HD CAMERA

SDI Wireless Transmitter 200m

User manual

Please read below safety instructions carefully before installation and

operation:

1. Please pay attention to all the warnings and hints on this device.

2. Do not expose this unit to rain, moisture and liquid.

3. Do not put any stuff into the device.

4. Do not repair the device or open the enclosure without professional

person guidance to avoid electronic shock.

5. Make sure good ventilation openings to avoid product overheating

damage.

6. Shut off power and make sure environment is safe before installation.

7. Do not plug-in/out the network cables and IR cables when it is in

using to avoid cables damage.

8. Use DC5V only. Make sure the specification matched if using 3

party DC adapters.

SDI Extender TX

sender*1pcs

SDI Extender RX

receiver*1pcs

DC5V/ A power 3

adapter*2pcs

IR blaster extension

cable*1pcs

1 SDI. Extender TX sender

• Important safety notice

This transmitter extends signal wirelessly from source device to SDI

display device up to 200meters with the advanced application of HD itT b

transport protocol and wireless technology. It requires no cables between

sender (TX) and receiver (RX) which makes the installation easy and clean.

• Introduction

Note:

1) Transmission distance will be different due to the environment.

2) Wall, brick or glass will shorten the signal cover range or cause big ed

signal loss.

1) Transmit signal from source device to display device up to 200SDI

meters wirelessly.

2) Support IR remote control function to control source device content

from long distance.

3) No cable between sender(TX) and receiver(RX)

4) Easy and clean installation

5) Supports SD-SDI, HD-SDI and 3G-SDI signal input

• Features

• Package contents

IR receiver extension

cable*1pcs

User manual*1pcs

1. SDI source device like video camera, video recorder etc

2. display device like SDTV, HDTV, and projector with port.SDI SDI

• Installation Requirement

• Panel description

IR IR I N OUT

Power led It lights when power is on

Data transmission

led

Led blinks slowly when it is building connection. Led blinks fast

when it is successfully connected and transmitting data

Connection led It lights when wireless signal is well connected

Power input Connect with DC5V/ A power adapter3

Reset Press reset button to restart the device

input SDI Connect with source deviceSDI

IR blaster extension

cable interface

Connect with IR blaster extension cable. Please put the IR blaster

close to source device to transmit the IR signal from receiverwell

Antenna Launch wireless signal

2 SDI E. xtender RX receiver

Power led It lights when power is on

Data transmission

led

Led blinks slowly when it is building connection. Led blinks fast

when it is successfully connected and transmitting data

Connection led It lights when wireless signal is well connected

Power input Connect with DC5V/ A power adapter3

Reset Press reset button to restart the device

output SDI Connect with display deviceSDI

IR receiver extension

cable interface

Connect with IR receiver extension cable. Please make sure the

remote control is within the required range of IR receiver

Antenna Receive wireless signal

Produktspezifikationen

Marke:	HELGI
Kategorie:	AV extender
Modell:	HLG0388SDI
WLAN:	Ja
Breite:	195.5 mm
Tiefe:	138.5 mm
AC-Netzadapter:	Ja
Produktfarbe:	Schwarz
Übertragungstechnik:	Verkabelt & Kabellos
Höhe:	32 mm
Material:	Metall
Gleichstrom-Anschluss (DC):	Ja
Betriebstemperatur:	0 - 60 °C
Typ:	AV-Sender & -Empfänger
Betriebsanleitung:	Ja
Verpackungsart:	Box
Anzahl der Antennen:	1
LED-Anzeigen:	Ja
Unterstützte Video-Modi:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Unterstützte Grafik-Auflösungen:	854 x 480 (WVGA), 1024 x 576 (WSVGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Maximale Bildwiederholrate:	60 Hz
Ausgangsstrom:	3 A
Maximale Auflösung:	1920 x 1080 Pixel
Maximal mögliche Übertragungsstrecke:	200 m
Arbeitsspannung:	5 V
Fernbedienung (IR) output:	1
Empfängergewicht:	575 g
Integrierte Antenne:	Ja
Fernbedienung (IR) input:	1
Gewicht Transmitter:	575 g
Stromverbrauch (Sender) (max.):	13 W
Stromverbrauch (Empfänger) (max.):	11 W