Hegel H300 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hegel H300 (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Hegel H300
High End Integrated Amplifier
User manual
USER GUIDE
Congratulations with your new HEGEL product!
All Hegel products are based on a simple philosophy:
The audio reproduction instrument shall reproduce the original musical sound, purely and naturally.
It shall use Scandinavian design reflecting natural music reproduction and styling to fit in with any interior.
The products shall be easy to operate and shall be manufactured according to the best quality principles.
All HEGEL products are designed with acoustical instruments in a concert situation as the point of
reference. The music is reproduced exactly like the original and is limited only by the quality of the
recording.
Our aim is to give you the best possible music experience!
SOUND ADVICE
The Hegel H300 Integrated Amplifier is easy to connect and operate and requires no prior technical knowl-
edge. However, to get the most out of the amplifier's superior sound and music quality, we have provided a
brief description of the connections and use of the amplifier in order to provide a total music experience.
We recommend keeping this user guide for future reference.
GENERAL USE
On/Off
The H300 amplifier is switched on and off with the power button in the middle of the front panel. When
powered up, the H300 will use 5 seconds to calibrate. During this time, the outputs will be muted.
NOTE: When powered up the outputs will be muted and the right hand part of the display will flash for
approximately 5 seconds, indicating mute. This is normal, and is part of the start-up procedure.
NOTE: When the H300 has been switched off, the amplifier should not be switched back on again before
30 seconds has passed.
Display
The left-hand part of the display normally shows the selected source input, while the volume value is
shown in the right-hand part of the display. A flashing volume value indicates that the amplifier is in mute
setting.
Source Selector
The input source selector knob is on the left-hand side of the front panel. The three letters in the left-hand
part of the display will show the selected source input.
Volume
The volume control knob is on the right-hand side of the front panel, and the volume level is indicated by a
number between 0 and 99 in the right-hand part of the display. The H300 will power up with a preset vol-
ume value. The volume level can be adjusted by turning the volume knob clockwise or counter clockwise,
or by using the RC8 remote control.
Mute
When the mute button on the RC8 remote control is pressed the speaker outputs and Pre Out output are
muted. A flashing volume number in the display indicates that mute is on. Press the mute button again to
switch mute off.
Home Theater
The Home Theater input is a fixed volume level input with the volume setting permanently set to a high
volume value. This input is available for connecting the H300 to a surround processor with internal
adjustable volume. Do not connect input sources such as CD-players, DVD-players, DACs or similar signal
sources to the Home Theater input. Connecting a fixed level signal source directly to the Home Theater
input, can cause severe damage to the amplifier and connected loudspeakers.


Produktspezifikationen

Marke: Hegel
Kategorie: Empfänger
Modell: H300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hegel H300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Hegel

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-