Hartke Pro 1800 Bedienungsanleitung

Hartke niet gecategoriseerd Pro 1800

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Hartke Pro 1800 (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
18
Stackable
Bass Enclosure
P R O F E S S I O N A L S E R I E S
1800 Introduction and Features
Congratulations on purchasing the 1800 bass enclosure by Hartke! The PRO
Series enclosures have been designed to provide excellent tone with a warm
punchy output. The 1800 features an 18-inch, proprietary low frequency driver
with an impregnated fabric surround, and matched convex dust cover all mount-
in rugged carpet with recessed jack plate and ergonomic handle, the 1800 will
provide reliable performance from gig to gig and venue to venue.
In these pages, youĘĽll find a detailed description of the features of the-1800, as
well as a description of its front and rear panels, step-by-step instructions for its
please donĘĽt forget to fill it out and mail it in so that you can receive online
technical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number,
the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-
372-6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
1800 Features
• 18-inch heavy-duty, Low Frequency
driver
• 3/4" Plywood construction
• Four Tuned Front Ports
• Perforated metal speaker grill
• Recessed metal handles
• Stacking corners
• 1/4-inch phone & Speakon input jacks
• Covered in durable carpet
Connecting the 1800
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little abou
impedance. Impedance is the electronic load that the speaker puts on the power amplifie
and is measured in Ohms.
the total impedance is cut in half and when two speakers are wire in “Series” the tota
impedance is the sum of the speakers individual impedance.
The
1800
impedance (many audio
guys used the made up word “ohmage”
however the correct term is impedance)
is 4 Ohms. So, when two 1800ĘĽs are
connected together in parallel, the tota
impedance is 2 Ohms. The impedance
of your speaker also has an effect on
your amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT
There is a minimum safe
impedance so be sure to check the
manufacturerĘĽs recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 1800 to Your Amplifier
The 1800 connections are made via
1/4” phone jacks located on the rea
panel jack-plate. Be sure to make you
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 1800ĘĽs rear
jackplate.
Using the EXTENSION Output
The 1800 provides both 1/4-inch and
Speakon connections. You can use
either connector to connect to your
amplifier head. Since both the 1/4-
inch phone and Speakon connectors
are wired in parallel, you can connect
additional speaker cabinets using eithe
connector as an extension output. Be
sure to read the section above on
impedance to insure a proper hook-up
with your amplifier.
Hartke Systems
Distributed Exclusively by
Samson Technologies Corp.
Hicksville, New York 11802
MODEL 2000
200 WATTS
8
ďż˝
= 120 WATTS
4
ďż˝
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUTPUTS
8
ďż˝
8
ďż˝
ON OFF
HPF
EFFECT
SENDRETUIRN

Produktspezifikationen

Marke: Hartke
Kategorie: niet gecategoriseerd
Modell: Pro 1800

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hartke Pro 1800 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Hartke

Hartke

Hartke 210TP Bedienungsanleitung

5 September 2024
Hartke

Hartke 410TP Bedienungsanleitung

5 September 2024
Hartke

Hartke 115TP Bedienungsanleitung

5 September 2024
Hartke

Hartke HyDrive HL112 Bedienungsanleitung

4 September 2024
Hartke

Hartke 810XL Bedienungsanleitung

4 September 2024
Hartke

Hartke Pro 2100 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HL410 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HX115 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HL210 Bedienungsanleitung

4 September 2024
Hartke

Hartke 4.5XL Bedienungsanleitung

4 September 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Wago

Wago 857-810 Bedienungsanleitung

16 September 2024
IFM

IFM RU1200 Bedienungsanleitung

16 September 2024
Laserliner

Laserliner VideoScope XL Bedienungsanleitung

16 September 2024
Mio

Mio Chatham Bedienungsanleitung

16 September 2024
Exquisit

Exquisit SBS135-040FDI Bedienungsanleitung

16 September 2024
IFM

IFM DN4034 Bedienungsanleitung

16 September 2024
Tripp Lite

Tripp Lite N254-024-SH-6A Bedienungsanleitung

16 September 2024
Optoma

Optoma SFFPRO2 Bedienungsanleitung

16 September 2024
TP-Link

TP-Link MC111CS Bedienungsanleitung

16 September 2024
Elro

Elro SF400S11 Bedienungsanleitung

16 September 2024