Hartke HyDrive 112b Bedienungsanleitung

Hartke niet gecategoriseerd HyDrive 112b

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Hartke HyDrive 112b (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fĆ¼r 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Owner's Manual
HyDrive 112b Cabinet
Congratulations on the purchase of your Hartke HyDrive 112b bass cabinet! We know
you donā€™t like reading owners manuals, but youā€™ve just purchased one of the ļ¬nest
bass speaker systems around, and we want to tell you about it. So, before you plug
in and start playing, weā€™d like to suggest you take just a few moments to scan these
pages.
The HyDrive 112b is a 300 watt, 4 ohm bass speaker cabinet featuring our patented
HyDrive hybrid cone bass transducers. HyDrive speakers are constructed using an
outside curved paper cone producing warm low frequencies and an inside anodized
aluminum cone that produces smooth mids and high-end extension. This radical
construction provides a clean sound with a big low end, allowing you to sculpt a wide
range of tones for any musical style.
With proper care and operation, your HyDrive cabinet will operate trouble free for
many years. We recommend you record your serial number in the space provided
below for future reference.
Serial number: ____________________________________________
Date of purchase: __________________________________________
NOTE: Should your Hartke Cabinet ever require servicing, a Return Authorization
(RA) number is necessary. Without this number, the unit will not be accepted.
If purchased in the United States, please call Hartke at 1-800-372-6766 for a
Return Authorization number prior to shipping. Please retain the original packing
materials and, if possible, return the unit in its original carton and packing materials.
If purchased outside the United States, please contact your local distributor for
warranty information.
Introduction
Power Handling 300W RMS
Cabinet Impedance 4Ī©
LF Speaker 12ā€ paper/aluminum driver
Frequency Response 70Hzā€“5kHz (-3dB)
-10dB LF Response 35Hz
Inputs 1/4ā€
Cabinet Type Ported
Cabinet Construction Plywood, extensive bracing, dado joinery
Grille Black perforated steel
Product Dimensions 17ā€ x 19.75ā€ x 15.25ā€
432mm x 248mm x 387mm
Product Weight 33lb
15kg
Speciļ¬cations
HyDrive 112b Bass Cabinet
When connecting the HyDrive 112b to an
ampliī˜Ÿer, only use unshielded speaker cables.
Connect your ampliī˜Ÿer output to the speaker
input on the HyDrive 112b jack plate.
IMPORTANT: Every amplifier has a minimum
safe operating impedance, so be sure to check
the manufacturerā€™s recommended impedance
for your amplifier to avoid any damage to your
amplifier or voiding your warranty.
The HyDrive 112b impedance is 4 Ohms. When
two cabinets are connected together in parallel,
the total impedance is 2 Ohms. The impedance
of your speaker has an effect on your amplifier.
In general, the lower the impedance, the more
power your amplifier will output.
Basically, impedance is the amount of current that will ļ¬‚ow through a speaker at
a certain voltage. It is measured in Ohms (Ī©). The actual impedance of a speaker is
not constant across all frequencies. So, for convenience we use the term ā€œnominal
impedanceā€, which refers to the impedance that a speaker presents to an ampliļ¬er at
a reference frequency.
A speaker typically has an impedance rating of 4Ī©, 8Ī©, or 16Ī©. Generally, the lower
the impedance of a speaker, the more power will be developed by the connected
ampliļ¬er. For example, a 4Ī© speaker will extract more power from your ampliļ¬er
than an 8Ī© speaker. If you connect a speaker with an impedance lower than the
ampliļ¬erā€™s output rating, the ampliļ¬er can overheat and damage the power output
section. It is important to learn how to connect multiple speaker cabinets safely
without damaging the speakers or the ampliļ¬er in this way.
Here is a simple rule of impedance: When two speakers with the same impedance are
wired in , the total system impedance is , and when two speakers parallel cut in half
with the same impedance are wired in , the total impedance is the series sum of the
speakers individual impedance.
Connecting the HyDrive 112b

Produktspezifikationen

Marke: Hartke
Kategorie: niet gecategoriseerd
Modell: HyDrive 112b

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hartke HyDrive 112b benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Hartke

Hartke

Hartke 210TP Bedienungsanleitung

5 September 2024
Hartke

Hartke 410TP Bedienungsanleitung

5 September 2024
Hartke

Hartke 115TP Bedienungsanleitung

5 September 2024
Hartke

Hartke HyDrive HL112 Bedienungsanleitung

4 September 2024
Hartke

Hartke 810XL Bedienungsanleitung

4 September 2024
Hartke

Hartke Pro 2100 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HL410 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HX115 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HL210 Bedienungsanleitung

4 September 2024
Hartke

Hartke 4.5XL Bedienungsanleitung

4 September 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĆ¼r -Kategorien-

Wago

Wago 857-810 Bedienungsanleitung

16 September 2024
IFM

IFM RU1200 Bedienungsanleitung

16 September 2024
Laserliner

Laserliner VideoScope XL Bedienungsanleitung

16 September 2024
Mio

Mio Chatham Bedienungsanleitung

16 September 2024
Exquisit

Exquisit SBS135-040FDI Bedienungsanleitung

16 September 2024
IFM

IFM DN4034 Bedienungsanleitung

16 September 2024
Tripp Lite

Tripp Lite N254-024-SH-6A Bedienungsanleitung

16 September 2024
Optoma

Optoma SFFPRO2 Bedienungsanleitung

16 September 2024
TP-Link

TP-Link MC111CS Bedienungsanleitung

16 September 2024
Elro

Elro SF400S11 Bedienungsanleitung

16 September 2024