Hartke 215XL Bedienungsanleitung

Hartke niet gecategoriseerd 215XL

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Hartke 215XL (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war fĂĽr 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
2 x15″Stackable
Aluminum Drive Bass Enclosure
Hartke
215XL Introduction and Features
Congratulations on purchasing the 215XL bass enclosure by Hartke! The XL
Series enclosures have been designed to provide excellent tone with a warm
punchy output. The 215XL features dual 15-inch, proprietary low frequency driv-
er with an aluminum cone, impregnated fabric surround, and matched convex
dust cover all mounted in a heavy-duty steel frame. Using heavy-duty plywood
construction, covered in rugged carpet with recessed jack plate and ergonomic
handle, the 215XL will provide reliable performance from gig to gig and venue
to venue.
In these pages, you’ll find a detailed description of the features of the 215XL, as
well as a description of its front and rear panels, step-by-step instructions for its
setup and use and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
215XL Features
• 2 x 15 Inch heavy-duty, Aluminum
Low Frequency driver
• 3/4" Plywood construction
• Four Tuned Front Ports
• Perforated metal speaker grill
• Recessed metal handles
• Stacking corners
• 1/4-inch phone input jack
• Covered in durable carpet
Connecting the 215XL
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel"
the total impedance is cut in half and
when two speakers are wire in “Series”
the total impedance is the sum of the
speakers individual impedance.
The 215XL impedance (many audio
guys used the made up word “ohmage”,
however the correct term is impedance)
is 4 Ohms. So, when two 215XL’s are
connected together in parallel, the total
impedance is 2 Ohms. The impedance
of your speaker also has an effect on
your amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 215XL to Your Amplifier
The 215XL connections are made via
1/4” phone jacks located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 215XL’s rear
jackplate.
Using the EXTENSION Output
The 215XL provides a convenient
Extension Output for connecting addi-
tional speaker cabinets in parallel. Be
sure to read the section above on
impedance to insure a proper hook-up
with your amplifier.
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K.
SERIAL NUMBER
115
~ AC INPUT
115 V/230V 5 0/60 Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
4

Produktspezifikationen

Marke: Hartke
Kategorie: niet gecategoriseerd
Modell: 215XL

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hartke 215XL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung niet gecategoriseerd Hartke

Hartke

Hartke 210TP Bedienungsanleitung

5 September 2024
Hartke

Hartke 410TP Bedienungsanleitung

5 September 2024
Hartke

Hartke 115TP Bedienungsanleitung

5 September 2024
Hartke

Hartke HyDrive HL112 Bedienungsanleitung

4 September 2024
Hartke

Hartke 810XL Bedienungsanleitung

4 September 2024
Hartke

Hartke Pro 2100 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HL410 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HX115 Bedienungsanleitung

4 September 2024
Hartke

Hartke HyDrive HL210 Bedienungsanleitung

4 September 2024
Hartke

Hartke 4.5XL Bedienungsanleitung

4 September 2024

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Wago

Wago 857-810 Bedienungsanleitung

16 September 2024
IFM

IFM RU1200 Bedienungsanleitung

16 September 2024
Laserliner

Laserliner VideoScope XL Bedienungsanleitung

16 September 2024
Mio

Mio Chatham Bedienungsanleitung

16 September 2024
Exquisit

Exquisit SBS135-040FDI Bedienungsanleitung

16 September 2024
IFM

IFM DN4034 Bedienungsanleitung

16 September 2024
Tripp Lite

Tripp Lite N254-024-SH-6A Bedienungsanleitung

16 September 2024
Optoma

Optoma SFFPRO2 Bedienungsanleitung

16 September 2024
TP-Link

TP-Link MC111CS Bedienungsanleitung

16 September 2024
Elro

Elro SF400S11 Bedienungsanleitung

16 September 2024