Hartke 410XL V2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Hartke 410XL V2 (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂŒr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
Owner's Manual
XL Series Bass Cabinets
2
Hartke
©2019, V1
278-B Duffy Ave
Hicksville, New York 117801
Phone: 1-800-372-6766
www.hartke.com
If you want to dispose this product, do not mix it with general household
waste. There is a separate collection system for used electronic products
in accordance with legislation that requires proper treatment, recovery and
recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway
may return their used electronic products free of charge to designated collection
facilities or to a retailer (if you purchase a similar new one).
For Countries not mentioned above, please contact your local authorities for a
correct method of disposal. By doing so you will ensure that your disposed product
undergoes the necessary treatment, recovery and recycling and thus prevent
potential negative effects on the environment and human health.
3
XL V2 Series Cabinets
Introduction
Congratulations on purchasing your Hartke XL V2 bass enclosure! The XL V2
Series enclosures have been designed to provide excellent tone with a fast attack,
deep low-end and punchy output. The 410XL V2 is a 4 x 10” 400 watt, 8 ohm,
tuned dual-chamber, dual-ported speaker cabinet. The 210XL V2 is a 2 x 10”
200 watt, 8 ohm, single-chamber, sealed cabinet.
Both cabinets feature Hartke 10” proprietary low frequency drivers with specially
designed aluminum cones, large voice coils on KaptonÂź formers, impregnated
fabric surrounds, and matched convex dust covers all mounted in a heavy-duty
steel frames. Using solid 3/4” plywood enclosures with textured vinyl covering,
black perforated steel grilles, reinforced corners and inset carry handles your XL
cabinet will provide reliable performance from gig to gig and venue to venue.
In these pages, you’ll find descriptions of the many features of your XL V2 cabinet
as well as instructions for its setup and use, and full speciïŹcations. You’ll also
find a registration card enclosed—please don’t forget to follow the instructions
so that you can receive online technical support and so we can send you updated
information about these and other Hartke products in the future. Also, be sure
to check out our website, hartke.com, for complete information about our full
product line.
With proper care and operation, your XL cabinet will operate trouble free for many
years. We recommend you record your serial number in the space provided below
for future reference.
Serial number: ____________________________________________
Date of purchase: __________________________________________
If you have any questions or comments regarding your XL V2 bass cabinet or any other
products from Hartke, do not hesitate to contact us at support@samsontech.com.
With proper care and maintenance, your Hartke bass cabinet will operate trouble-
free for many years. Should you XL V2 bass enclosure ever require servicing, a
Return Authorization (RA) number must be obtained before shipping your unit to
Hartke. Without this number, the unit will not be accepted. Please visit
www.samsontech.com/ra for an RA number prior to shipping your unit. Please
retain the original packing materials and, if possible, return the unit in its original
carton. If your Hartke XL V2 bass enclosure was purchased outside of the United
States, contact your local distributor.


Produktspezifikationen

Marke: Hartke
Kategorie: Nicht kategorisiert
Modell: 410XL V2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hartke 410XL V2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Hartke

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂŒr -Kategorien-