Hartke 2115 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hartke 2115 (21 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/21
Hartke Systems
BASS AMPLIFIER
2000/3500
Introduction 3
Features 4
Guided Tour 5
Model 2000 Front Panel 5
Model 2000 Rear Panel 7
Model 3500 Front Panel 9
Model 3500 Rear Panel 11
Setting Up and Using the Model 2000/3500 13
About Equalization 15
About Compression 17
Appendix A: Impedance vs. Expected Power 18
Appendix B: Block Diagram 19
Appendix C:
Changing the Model 2000/3500 Voltage 20
Specifications 21
Introduction
3
Congratulations on purchasing the Hartke Systems Model 2000/3500 Bass
Amplifier! Although these units are designed for easy operation, we suggest you
first take some time to go through these pages so you can fully understand how
we’ve implemented a number of unique features.
The two models covered by this manual differ in the following ways:
• The Model 2000 provides 200 watts of power (into 4 ohms), while the Model
3500 provides 350 watts of power (into 4 ohms).
• The Model 3500 offers a number of additional advanced features, including
front-panel compression and graphic equalizer LED indicators, effects send
and return jacks, an effects send/return balance knob, and a direct output
with ground lift and pre or post EQ selection.
Both models are optimized for use with electric bass instruments, and the front
panel controls in both models are virtually identical. You’ll find either to be an
excellent bass amplifier for live performance use in small and medium-size
venues; in addition, the Model 3500’s advanced features makes it ideal for use
in recording environments.
In these pages, you’ll find a detailed description of the many features of the
Model 2000/3500 Bass Amplifiers, as well as a guided tour through their front
and rear panels, step-by-step instructions for setting up and using each product,
detailed discussions about equalization and compression, and full specifications.
You’ll also find a warranty card enclosed—please don’t forget to fill it out and
mail it so that you can receive online technical support and so we can send you
updated information about these and other Hartke and Samson products in the
future.
SPECIAL NOTE: Should your unit ever require servicing, a Return
Authorization number (RA) is necessary. Without this number, the unit will not
be accepted. Please call Samson Technologies at (516) 932-1062 for a Return
Authorization number prior to shipping your unit. Please retain the original pack-
ing material and, if possible, return the unit in its original carton and packing
materials.


Produktspezifikationen

Marke: Hartke
Kategorie: Nicht kategorisiert
Modell: 2115

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hartke 2115 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Hartke

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-