Harman Kardon HK 3385 Bedienungsanleitung

Harman Kardon Empfänger HK 3385

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Harman Kardon HK 3385 (28 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/28

HK 3385

STEREO RECEIVER

OWNER’S MANUAL

SAFETY INFORMATION

1. Read Instructions. All the safety and operating instruc-

tions should be read before the product is operated.

2. Retain Instructions. The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings. All warnings on the product and in the

operating instructions should be adhered to.

4. Follow Instructions. All operating and use instructions

should be followed.

5. Cleaning. Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

6. Attachments. Do not use attachments not recommended

by the product manufacturer, as they may cause hazards.

7. Water and Moisture. Do not use this product near

water – for example, near a bathtub, wash bowl, kitchen

sink or laundry tub; in a wet basement; near a swimming

pool; or the like.

8. Accessories. Do not place this product on an unstable

cart, stand, tripod, bracket or table. The product may fall,

causing serious injury to a child or adult, and serious dam-

age to the product. Use only with a cart, stand, tripod,

bracket or table recommended by the manufacturer, or sold

with the product. Any mounting of the product should follow

the manufacturer’s instructions, and should use a mounting

accessory recommended by the manufacturer.

9. A Product and Cart Combination Should

Be Moved With Care. Quick stops, excessive

force and uneven surfaces may cause the

product and cart combination to overturn.

10. Ventilation. Slots and openings in the cabinet are pro-

vided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these open-

ings must not be blocked or covered. The openings should

never be blocked by placing the product on a bed, sofa, rug

or other similar surface. This product should not be placed in

a built-in installation, such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s instruc-

tions have been adhered to.

11. Power Sources. This product should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your

home, consult your product dealer or local power company.

For products intended to operate from battery power, or

other sources, refer to the operating instructions.

12. Polarization. This product may be equipped with a

polarized alternating-current-line plug (a plug having one

blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are unable

to insert the plug fully into the outlet, try reversing the plug.

If the plug should still fail to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety pur-

pose of the polarized plug.

13. Power-Cord Protection. Power-supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and

the point where they exit from the product.

14. Nonuse Periods. The power cord of the product should

be unplugged from the outlet when left unused for long

periods of time.

15. Outdoor Antenna Grounding. If an outside antenna

or cable system is connected to the product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

See Figure A.

16. Lightning. For added protection for this product during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

17. Power Lines. An outside antenna system should not

be located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits, as contact with

them might be fatal.

18. Overloading. Do not overload wall outlets, extension

cords, or integral convenience receptacles, as this can result

in a risk of fire or electric shock.

19. Object and Liquid Entry. Never push objects of any

kind into this product through openings, as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind

on the product.

20. Servicing. Do not attempt to service this product

yourself, as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

21. Damage Requiring Service. Unplug this product from

the wall outlet and refer servicing to qualified service personnel

under the following conditions:

a. The power-supply cord or the plug has been damaged; or

b. Objects have fallen onto, or liquid has been spilled into, the

product; or

c. The product has been exposed to rain or water; or

d. The product does not operate normally when following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as an improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified technician

to restore the product to its normal operation; or

e. The product has been dropped or damaged in any way; or

f. The product exhibits a distinct change in performance; this

indicates a need for service.

22. Replacement Parts. When replacement parts are

required, be sure the service technician has used replace-

ment parts specified by the manufacturer or that have the

same characteristics as the original part. Unauthorized substi-

tutions may result in fire, electric shock or other hazards.

23. Safety Check. Upon completion of any service or

repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper

operating condition.

24. Wall or Ceiling Mounting. The product should be

mounted to a wall or ceiling only as recommended by the

manufacturer.

25. Heat. The product should be situated away from heat

sources such as radiators, heat registers, stoves or other

products (including amplifiers) that produce heat.

Antenna Lead-In Wire

Ground Clamp

Antenna Discharge Unit (NEC Section 810-20)

Grounding Conductors (NEC Section 810-21)

Electric Service Equipment

Ground Clamps

Power Service Grounding Electrode System

(NEC Art 250, Part H)

Figure A.

Example of Antenna Grounding as per

National Electrical Code ANSI/NFPA 70

Important Safety Information

Verify Line Voltage Before Use

Your HK 3385 has been designed for use with 120-volt AC current. Connection to

a line voltage other than that for which it is intended can create a safety and fire

hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific model, or

about the line voltage in your area, contact your selling dealer before plugging the unit

into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not

recommend that extension cords be used with this product. As with all electrical

devices, do not run power cords under rugs or carpets or place heavy objects on

them. Damaged power cords should be replaced immediately by an authorized service

center with a cord meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug; never

pull the cord. If you do not intend to use the unit for any considerable length of time,

disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet

may present a shock hazard, and any modification to the product will void your

guarantee. If water or any metal object such as a paper clip, wire or staple acciden-

tally falls inside the unit, disconnect it from the AC power source immediately, and

consult an authorized service center.

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is

grounded so as to provide some protection against voltage surges and static charges.

Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides

information with

respect to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna

discharge unit, size of grounding conduc-

tors, location of antenna discharge unit,

connection to grounding electrodes and

requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV

(cable TV) system installer’s attention to article 820-40 of the NEC, which provides

guidelines for proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close to the point

of cable entry as possible.

Installation Location

• To ensure proper operation and to avoid the potential for safety hazards, place the

unit on a firm and level surface. When placing the unit on a shelf, be certain that

the shelf and any mounting hardware can support the weight of the product.

• Make certain that proper space is provided both above and below the unit for

ventilation. If this product will be installed in a cabinet or other enclosed area,

make certain that there is sufficient air movement within the cabinet. Under some

circumstances, a fan may be required.

• Do not place the unit directly on a carpeted surface.

• Avoid installation in extremely hot or cold locations, or in an area that is exposed

to direct sunlight or heating equipment.

• Avoid moist or humid locations.

• Do not obstruct the ventilation slots on the top of the unit, or place objects

directly over them.

• Due to the weight of the HK 3385 and the heat generated by the amplifiers,

there is the remote possibility that the rubber padding on the bottom of the

unit’s feet may leave marks on certain wood or veneer materials. Use caution

when placing the unit on soft woods or other materials that may be damaged

by heat or heavy objects. Some surface finishes may be particularly sensitive to

absorbing such marks, due to a variety of factors beyond Harman Kardon’s con-

trol, including the nature of the finish, cleaning materials used, and normal heat

and vibration caused by the use of the product, or other factors. We recommend

that caution be exercised in choosing an installation location for the component and

in normal maintenance practices, as your warranty will not cover this type of damage

to furniture.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, and only after

unplugging the AC power cord, wipe it with a soft cloth dampened with mild soapy

water, then a fresh cloth with clean water. Wipe it dry immediately with a dry cloth.

NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning

agent. Do not use abrasive cleaners, as they may damage the finish of metal parts.

Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with

other components, and make certain that you disconnect the unit from the AC outlet.

Important Information for the User

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates,

uses and can radiate radio-frequency energy

and, if not

installed and used in accordance with the instructions, may cause harmful interfer-

ence to radio communication. However, there is no guarantee that harmful interfer-

ence will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept interference received, including interference that may cause

undesired operation.

NOTE: Changes or modifications may cause this unit to fail to comply with Part

15 of

the FCC Rules and may void the user’s authority to operate the equipment.

Unpacking

The carton and shipping materials used to protect your new receiver during ship-

ment were specially designed to cushion it from shock and vibration. We suggest

that you save the carton and packing materials for use in shipping if you move, or

should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done

by carefully slitting the tape seams on the bottom and collapsing the carton. Other card-

board inserts may be stored in the same manner. Packing materials that cannot be col-

lapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and

other sections of the shipping protection are recyclable. Please

respect the environ-

ment and discard those materials at a local recycling center.

It is important that you remove the protective plastic film from the front-panel lens.

Leaving the film in place will affect the performance of your remote control.

SAFETY INFORMATION

Produktspezifikationen

Marke:	Harman Kardon
Kategorie:	Empfänger
Modell:	HK 3385

Brauchst du Hilfe?

Wenn Sie Hilfe mit Harman Kardon HK 3385 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Empfänger Harman Kardon

Harman Kardon AVR 1550 Bedienungsanleitung

1 September 2024

Harman Kardon HK 3390 Bedienungsanleitung

13 August 2024

Harman Kardon AVR 3650 Bedienungsanleitung

13 August 2024

Harman Kardon AVR 230C Bedienungsanleitung

8 August 2024

Harman Kardon AVR 254 Bedienungsanleitung

8 August 2024

Harman Kardon AVR 460/230 Bedienungsanleitung

7 August 2024

Harman Kardon AVR 340 Bedienungsanleitung

6 August 2024

Harman Kardon AVR 145 Bedienungsanleitung

3 August 2024

Harman Kardon AVR 335 Bedienungsanleitung

3 August 2024

Harman Kardon AVR 5000 Bedienungsanleitung

1 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024

AKG HP12U Bedienungsanleitung

15 Oktober 2024

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024

Technics SA-160L Bedienungsanleitung

8 Oktober 2024

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024