Harman Kardon AVR 340 Bedienungsanleitung

Harman Kardon Empfänger AVR 340

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Harman Kardon AVR 340 (4 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
Thank you for purchasing a Harman Kardon ®AVR 340. This Quick-Start
Guide will help you with a basic system installation. For detailed information
on any step in this Guide, please refer to the pages referenced in the
Owner’s Manual. We strongly recommend that you read the Owner’s
Manual for complete details on how to install, configure and operate the
AVR 340, as well as for the important safety information it contains.
Figure 1 – Speaker Placement
The colors shown for each speaker correspond to
the matching output terminal connection on the back
of the AVR 340 (see page 8).
FRONT
LEFT
SPEAKER
(White)
SURROUND 
BACK
LEFT
SPEAKER
(Brown)
SURROUND 
BACK
RIGHT
SPEAKER
(Tan)
CENTER
SPEAKER
(Green)
SUBWOOFER
(Purple)
SURROUND
LEFT
SPEAKER
(Blue)
FRONT
RIGHT
SPEAKER
(Red)
SURROUND
RIGHT
SPEAKER
(Gray)
Step 1. Place your speakers in the listening room
(see pages 19–21).
SPEAKER PLACEMENT
AVR 340 QUICK-START GUIDE
Connections Color Guide
Audio Connections Left Right
Front
Center
Surround
Subwoofer
Surround Back
Digital Audio Connections
Coaxial
Optical
Video Connections
Composite
S-Video
Match the colored jacks on the AVR 340 to the appropriate
jacks on your source equipment or speakers. The colors are
standardized, but not all equipment or connectors use them.
AVR 340 QUICK-START GUIDE
Figure 2 – Speaker Connections
Step 2. Connect the speakers to the receiver: red (+)
on speaker to colored (+) on receiver, and
black (–) to black (–) (see page 16).
Step 3. Connect the Subwoofer Pre-Out jack to
the Line-In jack on your subwoofer (see
page 16). You may adjust the settings on
the subwoofer later as needed.
Figure 3 – How to Use the Binding-Post
Speaker Terminal
SUBWOOFER
LINE IN/SUB/LFE
SURROUND BACK
RIGHT SPEAKER
SURROUND BACK
LEFT SPEAKER
FRONT RIGHT
SPEAKER
FRONT LEFT
SPEAKER
CENTER SPEAKER
+
_
+
_
SURROUND
RIGHT SPEAKER
+
_
+
_
+
_
SURROUND
LEFT SPEAKER
+
_
+
_
SPEAKER AND AUDIO CONNECTIONS
CD PLAYERAM AntennaFM Antenna
L R Optical Coax
REC/IN
PLAY/OUT
AUDIO RECORDER
Step 4. Connect AM and FM antennas as shown above (see page 16).
Step 5. Connect source components, as shown in Figures 4 and 6 and
the Device Connection Options chart on the back of this Guide
(see pages 16–17).
AUDIO connections: red redRight channel ( ) on source to right ( )
on AVR, on and left channel (white) on source to left (white) AVR.
DIGITAL AUDIO connections, if available: Choose either coax
(orange) to coax (orange) OR optical to optical for each device.
The Coax 1 input defaults to the DVD player, and the Optical 1 input
defaults to Video 2 (Cable/Sat), but either may be reassigned. Assign
the other digital inputs as appropriate for your equipment (see Step 7).
VIDEO connections: green blueChoose component (Y/Pb/Pr – / /
red yellow), composite ( ) or S-video (4-pin) for each video source.
Connect the Video Monitor outputs to your video monitor (TV). If
component video is available, only that monitor output is needed (see
page 17). The Component Video 1 input defaults to any of the DVD,
tuner, CD or tape sources. The Component Video 2 input defaults to
any of the Video 1, 2, 3 or 4 sources, or the 6-/8-channel direct
inputs. However, either component video input may be reassigned
using the Input Setup menu. Switch your TV set’s input to match the
type of video used for the currently selected source.
: Make sure the AVR 340 is turned off, then connect the
optional to the DMP connector. Dock your compatible
iPod®(not included) in .
Step 6. Plug all components into AC power outlets. The outlets on the back
of the AVR 340 should be used only for low-current products, such
as CD or DVD players, and the total should not exceed 100 watts.
Basic Receiver Configuration
Step 7. Select digital inputs: If your DVD is connected to Coax 1, and your
cable or satellite TV box (Video 2 source) is connected to Optical 1,
no adjustment is needed. For any other digital-device connections,
use the on-screen Input Setup menu, or the front-panel Digital Select
and arrow buttons to select digital input (see pages 22, 38).
Step 8. Select a surround mode: Press the Surround Mode button on the
front panel to select Dolby®Pro Logic®II – Movie. (You may select
other modes later as you become familiar with the AVR 340; see
pages 23–25 and 35–41.)
Step 9. Use
to configure and optimize your system:
Plug the EzSet/EQ microphone into the front-panel Headphones
jack (Figure 5). Place the microphone at your normal listening
position. If desired, the microphone may be attached to a standard
camera tripod using the threads on the bottom of the microphone.
Activate EzSet/EQ using the on-screen menu system (see pages
25–27). As EzSet/EQ senses the output of each speaker, you will
hear loud test signals. When the on-screen menu indicates that
setup is complete, your system is adjusted for output levels, delay
times, speaker settings and room equalization. Unplug the micro-
phone and store it for future use.
Step 10.
Your system is configured – sit back and enjoy!
/EQ
The
Bridge
T M
The
Bridge
T M
The
Bridge
T M
Figure 4 – Audio Connections
Dashed lines (– – – –) indicate coaxial and
optical digital audio connections. Choose
either type (but not both) for each digital
audio source.
Figure 5 – Connecting EzSet/EQ Microphone

Produktspezifikationen

Marke: Harman Kardon
Kategorie: Empfänger
Modell: AVR 340

Brauchst du Hilfe?

Wenn Sie Hilfe mit Harman Kardon AVR 340 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Harman Kardon

Harman Kardon

Harman Kardon AVR 1550 Bedienungsanleitung

1 September 2024
Harman Kardon

Harman Kardon HK 3390 Bedienungsanleitung

13 August 2024
Harman Kardon

Harman Kardon AVR 3650 Bedienungsanleitung

13 August 2024
Harman Kardon

Harman Kardon AVR 230C Bedienungsanleitung

8 August 2024
Harman Kardon

Harman Kardon AVR 254 Bedienungsanleitung

8 August 2024
Harman Kardon

Harman Kardon AVR 460/230 Bedienungsanleitung

7 August 2024
Harman Kardon

Harman Kardon AVR 340 Bedienungsanleitung

6 August 2024
Harman Kardon

Harman Kardon AVR 145 Bedienungsanleitung

3 August 2024
Harman Kardon

Harman Kardon AVR 335 Bedienungsanleitung

3 August 2024
Harman Kardon

Harman Kardon AVR 5000 Bedienungsanleitung

1 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024