Hall Research UHBX-8X Bedienungsanleitung

Hall Research Audio/Video Extender UHBX-8X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hall Research UHBX-8X (20 Seiten) in der Kategorie Audio/Video Extender. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

User’s Manual

UHBX-8X

8-Port HDMI Extender on HDBaseT™

with

IR, RS-232, and IP Control

Send 8 HDMI inputs to 8 remote displays up to 500 ft away

Send PoH to power compatible receivers

Extend IR in both directions

Send RS-232 and IR commands to any remote Display

Control unit via RS-232 and IP ports

UMA1213 Rev B

1163 Warner Ave Tustin, CA 92780, Ph: (714)641-6607, Fax (714)641-6698

8-Port HDMI Extender with Power, IR, and RS-232

Table of Contents

1.0 Introduction 3

2.0 Features 3

3.0 Setup 4

3.1 Package Contents 4

3.2 Extender Connections 4

4.0 Operation 11

4.1 Front Panel HDBaseT Status Indicators 11

5.0 Control Commands (RS232 and IP) 12

6.0 Troubleshooting 16

7.0 Specifications 18

TRADEMARKS USED IN THIS MANUAL

Hall Research and its logo are trademarks of Hall Research. Any other trademarks

mentioned in this manual are acknowledged as the property of the trademark owners.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment generates, uses, and can radiate radio frequency energy and if not installed and

used properly, that is, in strict accordance with the manufacturer’s instructions, may cause

interference to radio communication. It has been designed to comply with the limits for a Class A

computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,

which are intended to provide reasonable protection against such interference when the equipment

is operated in a commercial environment. Operation of this equipment in a residential area is

likely to cause interference, in which case the user at their own expense will be required to take

whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

UHBX-8X

1.0 Introduction

The UHBX-8X is an 8-Port HDMI extender that converts 8 inputs to

corresponding HDBaseT™ outputs for extension to 150 meters/500 ft on

single UTP. The extender supports HDCP, Deep Color, CEC, and 4K (UHD)

resolutions. Compatible receivers include the economical UH-1BT-R or UH-

1BTX-R for HDMI extension to 230 ft or 330 ft respectively, or the UHBX-

R-PD which supports RS-232, IR, PoH and Long Reach modes to 500 ft.

When using receivers with PoH function, a single optional 48v power supply

is needed for the 8-channel sender (Model # 511-PS4815).

The UHBX-8X provides both IP (Ethernet), and RS-232 ports for control. The

user can address and send RS-232 or IR commands to any of the receivers to

control the remote display. IR signals can also be extended in both directions.

The UHBX-8X can generate IR commands to send to remote TVs but it also

provides an IR detect e detector can be routed to or input. The IR received by th

any particular or combination of outputs. 8 separate IR emitter ports are

provided on the rear of the UHBX-8X The source of these signals would be

IR detectors at each remote location. This would be perfect for controlling

multiple sources in a rack remotely from where the TV’s are located

The extender is constructed as a 1RU rack-mountable unit and has built-in

power supply. LED indicators on the front panel show Link status, Video

status, Long Reach, and PoH Power for each of the 8 outputs. The UHBX-8X

is designed and manufactured in the USA.

2.0 Features

• Converts 8 separate HDMI inputs to corresponding HDBaseT™

outputs

• Extends IR in both directions

• Can issue RS-232 or IR commands to any output (requires

compatible receiver)

• RS-232 and IP control ports

• Supports HDCP, 3D, Deep Color, CEC, and 4 K (UHD) resolutions

• Sturdy 1RU design with built in power supply

• HDBaseT™ Compliant

• Can power compatible receivers through the cable using PoH

(requires optional 48v supply)

• Front panel status indicators for power, link, video and more for each

channel

• Designed and manufactured in the USA

Produktspezifikationen

Marke:	Hall Research
Kategorie:	Audio/Video Extender
Modell:	UHBX-8X
Unterstützte Audioformate:	LPCM
Breite:	482.6 mm
Tiefe:	196.85 mm
Gewicht:	3130 g
Mitgelieferte Kabel:	AC
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	44.45 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 / 60 Hz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Netzstandard:	IEEE 802.3af
Zertifizierung:	CE, FCC Class A
Typ:	AV-Sender
Betriebsanleitung:	Ja
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
HDCP:	Ja
Unterstützte Video-Modi:	480i, 480p, 1080p
Unterstützte Grafik-Auflösungen:	640 x 480 (VGA), 1920 x 1200 (WUXGA), 4096 x 2160
3D:	Ja
Rack-Einbau:	Ja
Maximale Auflösung:	4096 x 2160 Pixel
HDMI-Version:	1.4
Eingangsstrom:	1.5 A
HDMI-In:	8
Farbtiefe:	12 Bit
Audioausgang:	8
RS-232 Eingangs-Ports:	1
HDBaseT-Port:	Ja
Consumer Electronics Control (CEC) Unterstützung:	Ja
Eingang:	8
RJ-45-Ausgangsanschlüsse:	8
Erweiterte Display-Identifikationsdaten (EDID):	Ja
Stromverbrauch (Sender) (max.):	30 W
Baudrate:	115.2 Kbit/s
Bidirektional:	Ja
CEC-Durchführung:	Ja