Hähnel Captur Module Pro Bedienungsanleitung

Hähnel Fernbedienung Captur Module Pro

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hähnel Captur Module Pro (50 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/50
Lock Start/Stop
SET
Manual
Module - Pro
Receiver
Note:
Push in fully. P1 Cable
receiver end plug
is grey in colour.
Transmitter
APTUR
Pro
IR
< up to 12 metres >
Note:
Push in fully. P1 Cable receiver
end plug is grey in colour.
Pro
Captur Module - Pro 1
Connecting your Captur Module - Pro
Wireless: Requires Captur (sold separately)
Wired: Requires Camera Cable (sold separately)
Captur Module - Pro Controls
7
6
1 82 54
9 10 11 12
3
1413 15 16
17 18 19 20 21
29
Off/On
AA x 2 Battery
Compartment
AA x 2 Battery
Compartment
Tripod Mount
LED
Rubber Housing
High/Low IR beam
Tripod Mount
Tripod Mount
SET
Lock Start/Stop
Lock
Release Button
Cable
Start/Stop
Rubber Housing
Off/On
Micro USB power in
Micro USB power in
27
25
26
28
22 23
24
2 Captur Module - Pro
Interval timed photography chart
APTUR
Module - P ro
SET
Lock Start/Stop
APTUR
Module - P ro
SET
Lock Start/Stop
1/2
Push
Autofocus
/Sto
p
A
P
M
odu
S
L
ock
1
/2
Auto
f
ocu
s
Full
Push
Shutter Release
Manual Remote Control
Green Red
25 25
3 =
4 =
5 =
6 =
7 =
6
=
Repeat 3 x interval 1
3 shots interval 1
1 min interval 2
Delay 1 hour
No long
10 sec interval 1
INTVL2INTVL INTVL INTVL1 1 1DEL INTVLAY 2
10Sec1min10Sec10Sec 1min1Hr
SHOOT
SHOOT
SHOOT
SHOOT
SHOOT
SHOOT
SHOOT
SHOOT
SHOOT
N1
=3 shots
N1
=3 shots
N2
Example
:
=3 x INTVL1
N1
=3 shots
Captur Module - Pro 3
SET
SET
SET
Interval Timer Toggle Button
4 Captur Module - Pro
SET
SET
SET
Sensor Toggle Button
Captur Module - Pro 5
Captur Module - Pro
1 Beeper ON/OFF
2 Button Lock
3 Delay before shooting starts
4 Duration of burst/exposure with
continuous/bulb
5 1st Interval time
6 Number of shots at 1st Interval
Number of times
program is repeated
7 2nd Interval time
8 Low battery indicator
9 Hours
10 Minutes
11 Seconds
12 Shot count 0 to 999, --- (unlimited)
13 Sensitivity adjustment
14 Delay before shooting starts
15 Duration of burst/exposure with
continuous/bulb
16 0 to 999, -t—(time lapse), --- (unlimited)
17 Sound triggering
18 Infra-Red triggering
19 Light triggering
20 Laser triggering
21 Auxiliary triggering
22 Light/Laser Built-in Light and Laser sensor
23 Sound Built-in Microphone sensor
24 IR Built-in IR sensor
25 Shutter release LED
26 AUX Auxiliary sensor input socket
27 SET button
28 Toggle Button
29 Module – IR IR beam generator
GB
6 Captur Module - Pro
Setting up Captur Module - Pro
The Captur Module - Pro is used as an accessory with the Captur (sold
separately) to control the camera wirelessly. The Captur and the Captur
Module - Pro must be channel matched using DCM. Alternatively you
can also connect the Captur Module - Pro directly to a DSLR camera with a
camera cable (sold separately).
Digital Channel Matching – DCM (Requires Captur Transmitter)
a. Transmitter - Press and hold button + Turn ‘ON’. LED will ash green
rapidly
b. Timer - Press and hold SET button 27 + Turn ‘ON’. LED will show steady
red
c. Receiver - Press and hold button + Turn ‘ON’. LED will show steady red
d. DCM is complete. Turn both Module - Pro, Receiver and Transmitter ‘OFF’
and ‘ON’ to reboot
Note: For multiple Receivers repeat step ‘c’ for all receivers without
turning off transmitter
Manual Remote Control
The Release Button works similarly to the camera shutter release. ½
push = Autofocus, LED 25 shows steady green. Full push = Shutter release,
LED 25 shows red. To ‘HOLD’ the shutter release for bulb photography,
press down Release Button for more than 3 seconds and LED 25 will
ash red. Press Release Button again to release the hold.
Interval Timer Programmable Functions
Ensure that LCD is displaying 3, 4, 5, 6 or 7. Press
Start/Stop button to ‘Start’ the ‘Interval Timed Photography’. The Captur
Module - Pro will now take a photo continuously at the factory set interval
time. Press Start/Stop again to ‘Stop’ the interval timed photography.
Press SET button 27 to adjusted parameters. Toggle Button 28 or +
- is used to adjust the value of the parameters. Press SET button 27 again to
conrm adjustment. The values of the following parameters can be adjusted
as required. Use Toggle Button 28 or to move between the < >
parameters which need to be adjusted.
GB
Parameters
3
4
5
6
7
Setting
0s to max 99hrs 59’min
59”s (in 1s increments)
1s to max 99hrs 59’min
59”s (in 1s increments)
1 to 999 and ---
(unlimited)
1s to max 99hrs 59’min
59”s (in 1s increments)
Description
Delay before 1st shutter
is released
Burst/bulb time
1st Interval Time
= Number of
shots for 1st Interval
= Number of
times program is
repeated
2nd Interval Time
Sensor triggering
The Captur Module – Pro has build in sensors which can trigger the camera.
Use Toggle Button 28 or to move from one sensor to the other < >
to select the required sensor (e.g. 17 ). Now press Start/Stop
button to ‘Start’ the sensor triggering. The Captor Module – Pro is now ready
to trigger camera and, LED 25
shows steady green. When the Captur
Module – Pro is triggered by the sensor, it will trigger the camera to take
photo and LED 25 shows red momentarily (e.g. with “SOUND” started
clap you hand” and the Captur-Pro will trigger. You may need to adjust the
“sensitivity” 13 to trigger the sound)
Sensor
17
18
19
20
21
Comments
Refer to www.hahnel.ie for
more info
Description
Trigger sound sensor 23 Adjust sensitivity 13 level
Align Captur Module – IR 29
with sensor 24 to create a
beam
Breaking the beam will trigger
the Module - Pro
Trigger light sensor 22 Adjust sensitivity 13 level
Align any Laser Pen (sold
separately) with sensor 22 to
create a laser beam
Breaking the beam will trigger
the Module - Pro
Triggered by external sensor
connected to AUX socket
Note:
More information available on www.hahnel.ie
Wrong connection of external AUX sensors may damage the Captur
Module –Pro.
Captur Module - Pro 7
GB


Produktspezifikationen

Marke: Hähnel
Kategorie: Fernbedienung
Modell: Captur Module Pro

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hähnel Captur Module Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Fernbedienung Hähnel

Bedienungsanleitung Fernbedienung

Neueste Bedienungsanleitung für -Kategorien-