Hager WGCXS116SNB Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hager WGCXS116SNB (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 135 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function
German socket outlet for electrical installations in buildings. 3pole design with shutter
for enhanced contact protection.
Compatibility
The socket outlet is compatible with the following plug types:
Plugs Pins AmperagePlug types Plug designs Plug standards
Type “F 3pole round pin ( 4.8 mm) Ø
with earthing contact L, N, Õmax. 16A CEE 7/4
Type “E+F 3pole round pin ( 4.8 mm) Ø
with earthing contact L, N, Õmax. 16A CEE 7/7
Type “C max. 16A CEE 7/172pole round pin ( 4.8 mm) L, NØ
Type “C
Europlug 2pole round pin ( 4.0 mm) L, NØ max. 2.5A CEE 7/16
Correct use
- For the ush-mounted installation in standard wall boxes (wall box depth ≥ 35 mm).
- Only suitable for use in indoor areas with no drip and no spray water.
16A German socket w/shutter
Hager Muse / Hager Inspire
Installation manual
2
Technical data
Rated voltage: 250 V~
Frequency: 50/60 Hz
Socket rated current: 16 A
Conductor cross-section of screw terminals: min. 1 x 1.5 mm² ... max. 2 x 4 m
Distance of xing holes: 60.3 mm
Socket compliance: IEC 60884-1
Information for electricians
Installation and electrical connection
DANGER!
Touching live parts can result in an electric shock.
An electric shock can lead to death.
Disconnect the connecting cables before working on the device and
cover all live parts in the area!
ç
Preparing the device for installation
Notches
Frame
1A Hager Muse
Hager Muse: Carefully loosen the frame on the notch with a at-blade screwdriver.
Lift up and remove the frame ( ).1A
3
Hager Inspire1B
Cover
plate
Frame
Notches
Hager Inspire: Carefully loosen the frame on the notches with a at-blade screw-
driver. Lift up and remove the frame ( ).1B
Hager Inspire: 1BRemove the cover plate also with a at-blade screwdriver ( ).
Connecting the device
E
N
L
2
Strip connection cables approx. 10 ... 12 mm.
Wire the device according to the appropriate connection diagram ( ).2


Produktspezifikationen

Marke: Hager
Kategorie: Nicht kategorisiert
Modell: WGCXS116SNB

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hager WGCXS116SNB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Hager

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-