GVM GP-120QD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GVM GP-120QD (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
shutter release Shutter release
extension cable
1 Package Contents
1 Locate the battery clip on the back of the remote. .
2 Inser t the battery. .
2
2
2
22 Installing the Battery
Plug the remote cable into the remote and motor.
3
3
3
33 Connecting he emote nd otor t r a m
2. Plug the shutter release cable into the remote
control and the camera’s remote control terminal.
Use the extension cable if more length is required.
+
+
+
++ =
=
=
==
Portable bag
Battery Hook&LoopRemote 4
4
4
44 Settings Menu:
Remote c able
1. Turn off power to reset the remote control.
2. Settings Menu
1/ Set the Language:
1. Press the up or down arrow and highlight the
Language menu option (P1).
2. Press the right or left arrow button to change
language between English and Chinese. Long
press the middle button to save your settings.
Set the start point:2/
1. Press the up or down arrow and
highlight the Settings menu option
(P2).
2. Press the middle button.
3. Highlight the Set Start option and
press the middle button (P3).
4. Press the right or left arrow button
to move the slider. Press the middle
button to stop the motion.
5. Press the middle button a second
time to select the start point (P4)
6. Long press the middle button to
save the start point.
Set the end point:3/
1. Highlight the Set End option and press the
middle button (P5)
2. Press the right or left arrow button to move
the slider. Press the middle button to stop the
motion.
3. Press the middle button a second time to
select the end point (P6)
4. Long press the middle button to save the
end point.
Motorized Slider
Following or Parallax Shot
The camera always points at the subject.
1. Loosen both left and right side adjusting rod brakes.
2. Move the camera base to the left side and adjust the
rod so that the camera points
at the subject.
3. Lock the left side rod brake.
4. Move the camera base to
the right side and adjust the
rod so that the camera points
at the subject.
5. Lock the right side rod brake.
Pan Shot
The camera pans with a maximum angle of 120°.
1. Loosen both left and right side adjusting rod brakes.
2. Move the camera base to
the left side and adjust the
rod so that the camera
points to the left side of the
subject.
3. Lock the left side rod brake
4. Move the camera base to
the right side and adjust the
rod so that the camera points
at the right side of the subject.
5. Lock the right side rod brake.
TROUBLE SHOOTING
1. Use a standard Sony NP-F550/F570/F770/F9XX
series battery.
2. Monitor the battery power level shown on the bottom
of the remote controller.
3. Make sure all cables are firmly inserted into all
devices.
4. If the slider is not horizontal, make sure to lock the
center brake before turning off the power or
disconnecting the cable. Under normal operations, the
motor acts as a brake and any loss of power will permit
the camera base to quickly fall to its lowest point
potentially damaging your camera or slider.
1. Locate the shutter release and extension
cable.
Using the time-lapse function
Camera shutter
release input
P3P2
P4
Set Sta rt
Set End
Lan guage :En g li sh
Reset :No
Versio n: 1. 0
Setti ng
Video Shot
Time L aps e
Shutt er se tup
Setti ng
Set Sta rt
Set End
Lan guage :En g li sh
Reset :No
Versio n: 1. 0
Setti ng
Speed :50 %
Step: 0
Set Sart: -33 5 54 4 32
Set Start
Set Sta rt
Set End
Lan guage :En g li sh
Reset :No
Versio n: 1. 0
Setti ng
Pan-shot for Maximum angle 90°
Follo wing sho ot
Battery Charger
There are three photography methods available with
this slider. The Common Shot, the Following Shot and
the Pan Shot.
Common Shot
The camera angle does not change.
1. Loosen the adjusting rod
brakes on both ends and
center using the provided
scales.
2. Tighten the adjusting rod
on both ends.
5
5
5
55 Using the slider
Auto L oop
Auto Stop
Auto Mo de
Auto L oop
Auto Stop
Auto Mo de
P14
5. Auto Mode
Auto Mode has two options: Auto Loop and Auto Stop. To use
either one, you first must set the start and end points as
described in the Settings section.
1. Press the up or down arrow
and highlight the Video Shot
menu option. Then press the
middle button.
2. Press the up or down arrow
buttons and highlight the Auto
Mode menu option (P13).
Auto Loop will provide motion between the start and 1/
end points indefinitely.
1. Highlight the Auto Loop button and then
press the middle button (P14).
2. Press the right or left arrow to
start motion.
3. Press the middle button to
pause the motion.
Auto Stop will provide motion between the start and 2/
end points one time.
1. Highlight the Auto Stop button and then
press the middle button (P15).
2. Press the right or left arrow to start motion.
3. Press the middle button to pause the motion.
Common Shot
P7P6
P4
P8
Speed :50 %
Step: 0
Set End :-335 54 432
Set End
Video Shot
Time L aps e
Shutt er se tup
Setti ng
Int e rval: .1 0
Time- l ap se: 1 . 0
Stop T i me: .1 2
Photo:10 00
Auto L oop No:
Setti ng
Speed :50 %
Step: 0
Set Sart: -33 5 54 4 32
Set Star t
P10
Video Shot
Time L aps e
Shutt er se tup
Setti ng
Manual Mod e
Auto Mo de
Setti ng
Set Sta rt
Set End
Lan guage :En g li sh
Reset :No
Versio n: 1. 0
Setti ng
Speed 50: %
Dire ct io n Pau se :
Manual Mod e
Vide o Shot
Manual Mod e
Auto Mo de
Setti ng
P13P12
P15
4/ Set the speed:
1. At any time while setting the start or end
points, you can adjust the speed from
[1-100%] by pressing the Up or Down arrows
(P4), (P6).
Reset:5/
1.Highlight the Reset option(P7).
2.Press the right r left arrow button
to choose"Yes"or"No".Press the
middle button to reset the remote
control or go back setting menu.
3.Long press the middle button to
save the setting.
3. Time lapse menu
1/ Set the start point:
1. Press the up or down arrow and highlight the Time Lapse
menu option (P8).
2. Press the middle button.
3. Highlight the parameter you want to change
and adjust its value by pressing the right or left
arrow button (P9).
4. Press the middle button when complete.
5. Press the right or left arrow button to begin
time lapse shooting.
6. Press the middle button to pause any motion.
7. The minimum Interval time is 0.1 second, the
minimum Stop time is 1 second, and the Stop
time needs longer than Time-lapse time at least
0.2 seconds。
4. Video shot menu
1/ Manual Mode:
1. Press the up or down arrow and highlight
the Video Shot menu option (P10) and then
press the middle button.
2. Highlight Manual Mode and then press the
middle button(P11).
3. Press the left or right arrow button to begin
motion (P12).
4. You can adjust the speed at any time by
pressing the Up or Down arrow buttons.
P11
P9
P1
P5
P6
Speed :50 %
Step: 0
Set End :-335 544 32
Set End
Add: 4301 N delaware ave unit D.Philadelphia. PA. 19137
Web: www.gvmled.com
MOTORIZED SLIDER
GP-80QD
GP-120QD
DC
DC
DC
DCDC
ad
ad
ad
adadapter
apter
apter
apterapterDC adapterDC adapter
S
S
S
SSh
h
h
hhu
u
u
uut
t
t
ttt
t
t
tte
e
e
eer
r
r
rrShutter
Re
Re
Re
ReRel
l
l
lle
e
e
eea
a
a
aas
s
s
sse
e
e
eeRelease
Shutter
Release
M
M
M
MMo
o
o
oot
t
t
tto
o
o
oor
r
r
rrMotor
c
c
c
cco
o
o
oon
n
n
nnn
n
n
nne
e
e
eec
c
c
cct
t
t
tti
i
i
iio
o
o
oon
n
n
nnconnection
Motor
connection


Produktspezifikationen

Marke: GVM
Kategorie: Nicht kategorisiert
Modell: GP-120QD

Brauchst du Hilfe?

Wenn Sie Hilfe mit GVM GP-120QD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert GVM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-