GVM 2D Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GVM 2D (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
MOTORIZED SLIDER
1
1
1
11 Packing list
2
2
2
22 Mounting the slider and camera
1. Please charge the wireless controller and battery before
using this product.
2. Please install and use this product as shown in the picture.
1 Mounting the motorized camera head on the slider.
(As shown below)
1 2
1 2
2 Use the signal cable to connect the motorized camera
head and slider. (As shown below)
1 2
3 Mounting the camera on the slider. (As shown below)
1 2
4 Use the shutter cable to connect the motorized camera
head and camera. (As shown below)
1 2
3
5 Install the battery on the slider and check the signal
cable or shutter cable connecting correctly or not.
(As shown below)
1 2
3
3
3
33 Slider motion
1. Turn on the slider and wireless controller. (The slider s
LED indicator light open and blinking, the controllers
screen open as shown below)
3. Manual operation mode: Video Shot-Manual Mode
(Press the button of the controller and the orbit will act
accordingly)-choose the speed menu can adjust the
current speed.
4. Auto operation mode:
Append Point A
(Start poin t)
① : Setting the append point
A : “Video Shot-Auto Mode-Set key-Append Point A”
(Move the camera to the start point you need)-Save:Yes
(As shown below)
B : “Video Shot-Auto Mode-Set key-Append Point B
(Move the camera to the end point you need)-Save:Yes
(As shown below)
Append Point B
(End po in)
5. Time Lapse: Time Lapse Setting” - setting the “Times,
“ Photos,Stop Time,Delay Time,Set start” and “set End
-Execution(As shown below)
GVM - 2D
45
wireless
controller*1
battery*2 battery
charger*1
wireless controller
charger*1
shutter cable*1
motorized
camera head*1
signal cable*1 Carry bag*1
sketch of charge the wirel ess control lersketch of charge the batte ry
2. Bluetooth wireless connection: press Setting-
Bluetooth Setting-Searching Device-choose the device
code which start with letter D-pressOKbutton to confirm
the device(The upper right of the screen will show if
the connecting is successful) - -› ›
Video Shot
Time Lapse
Panotama Shot
Setting
Language English :
Reset No :
Versio n 1 0 0 : . .
Bluetooth Setting
Searc hing Device
Language English :
Reset No :
Versio n 1 0 0 : . .
Bluetooth Setting
1: D8B0 4CEA C83F
- -› ›
Video Shot
Time Lapse
Panotama Shot
Setting
Manua l Mode
Auto Mode
Speed 100 : %
Axis X 0 :
Axis Y 0 :
Axis Z 0 :
- - - - - -› › › › › ›
Speed 100 : %
Axis X 0 :
Axis Y 0 :
Axis Z 0 :
Speed 100 : %
Axis X 1058 :
Axis Y 0 :
Axis Z 0 :
- - - -› › › ›
Auto Loop mode:
Video Shot-Auto Mode-Auto Loop-adjust the “Speed-
setting the start point-setting the end point-setting the
Loop Count-Execution(As shown below)
Diago nal A Diagonal B
Video Shot
Time Lapse
Panotama Shot
Setting
Manua l Mode
Auto Mode
Set Key
Auto Lo op
Auto Stop
Append Point : A
Axis X : 0
Axis Y : 0
Axis Z : 0
Save : Yes
Append Point
Update Point
Delete Point
Point :
void
- - - - - -› › › › › ›
- - - - - -› › › › › ›
Append Point : B
Axis X : 0
Axis Y : 0
Axis Z : 0
Save : Yes
Append Point
Update Point
Delete Point
Point :
void
- - - - - -› › › › › ›
Set Key
Auto Lo op
Auto Stop
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execu tion
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execu tion
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execu tion
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execu tion
Speed : 100%
Set Start : A
Set End : B
Loop Count : 6
Execu tion
- - - - - -› › › › › ›
- - - - - -› › › › › ›
Video Shot
Time Lapse
Panotama Shot
Setting
Set Key
Time Lapse Setting
Times : 00:00:01.0
Photos : 1
Stop Time : 1.0
Delay Time : 0.2
Set start : A
Set End : B
TimeLapse : Status Running
Completion : 0
Remaining : 0
Run Time : 00:00:01
Battery : 0.000
- -› ›
Loop : Yes
Execu tion
- -› ›
- - - - - -› › › › › ›
Video Shot
Time Lapse
Panotama Shot
Setting
Diagonal A
Diagonal B
AxisX Photos : 4
AxisY Photos : 1
Stop Time : 1.0
Delay Time : 0.2
Execu tion
- - - - - -› › › › › ›
6. panorama shot: Setting the “Diagonal A” and “Diagonal B”
- Setting the Axis X photos(As shown below), then press
“Execution


Produktspezifikationen

Marke: GVM
Kategorie: Nicht kategorisiert
Modell: 2D

Brauchst du Hilfe?

Wenn Sie Hilfe mit GVM 2D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert GVM

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-