Growatt Shine WiFi-X Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Growatt Shine WiFi-X (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Growatt ShineWiFi-X
码,或ShinePhone
下 并
细信 新用 手册,请 到 下 http://server.g rowatt.com
1. : 确
2. http://server-cn.growatt.com 容 。
【 】卓 苹&
400-931-3122 +86 755 2747 2131F
Step1.
备 接USB
2.
3.
Step3. 1. 线
5.线
APP Shine
Phone “+”” ,
ShineWiFi-X
ShineWiFi-X ShineWiFi-X
绿 ShineWiFi-X
Phone
光伏设
Shine
2. 行 进;ShinePhone ,
1. 备 接USB
6.
E @ W service www.growatt.comginverter.com
启光伏设备,并检查连接状态
Step2.
ShineWiFi-X
ShineWiFi-X LED色 闪
LED
LED
USB
色 灯LED
ShineWiFi-X与 连
绿色 灯LED
ShineWiFi-X与 、
色 灯LED
ShineWiFi-X与 、
a 线成,不
虑,请使线b
c
线d
3.描 外,ShineWiFi-X
4. ,提
ShineWiFi-X
7.
“+”ShinePhone “
Step4.
键 秒 KEY 6 LED
在 ““+”ShinePhone
Step5.
LED
USB
查 接USB
绿
LED
ShineWiFi-X
( 检1
( 对使2
5279,5280
色 灯LED
ShineWiFi-X与 、
WiFi
ShineWiFi-X
绿
ShineWiFi-X
( 检1
a) 线成,不
虑,请使线b)
c)
线d)
( 检2
WiFi AP于 模
退
ShineWiFi-X按钮说明
ShineWiFi-X
ShineWiFi-X ShineWiFi-
X
入 模( 模AP AP
使
ShineWiFi-X AP在 模
ShineWiFi-X ShineWiFi-
X
退出 模AP
个 长LED
使
Scan the QR code below to download ShinePhone, also you
search ShinePhone in iOS or Google Play Store,
install it.
can
download and
R
R
R
RRe
e
e
eeg
g
g
ggi
i
i
iis
s
s
sst
t
t
ttr
r
r
rra
a
a
aat
t
t
tti
i
i
iio
o
o
oon a
n a
n a
n an an
n
n
nnd a
d a
d a
d ad ad
d
d
ddd
d
d
ddi
i
i
iin
n
n
nng d
g d
g d
g dg de
e
e
eev
v
v
vvi
i
i
iic
c
c
cce
e
e
ee
Note:1. Make sure you download the latest version
2. For further information please visit server.growatt.com
【 】Android & iOS
Step3. Connect your mobile phone to the WiFi of your home 1. which the ShineWiFi-X module will be connected.
1) The router name should consist with English letters
numbers, it does not support special symbols.
2) For safety reason, please use an encrypted wireless network
3) It does not support a public network that uses a secondary
authentication.
4) It does not support bridge network.
Open ShinePhone APP, click “Register” on login page. 2.
router
of and
After install the ShineWiFi-X module, turn on the inverter, red LED
flashing indicates the inverter and ShineWiFi-X communication is
normal.
Indication
ShineWiFi-X not connected well
with inverter USB port
ShineWiFi-X and inverter
communication is OK
ShineWiFi-X, inverter and router
communication is OK
ShineWiFi-X, inverter, router and
ShineServer communication is OK
Select country and city, then clickNext” e 3.
Note: If you select a wrong country and cit
time maybe wrong.
4.Fill out the required information, then click “ ”,Next it will guide
you to the “Add datalogger” page.
Appendix A: ShineWiFi-X KEY Button Description
LED State
Indicate
Troubleshooting
All three LEDs are dark
ShineWifi-X can not find inverter via USB port
1.Try to reconnect ShineWifi-X to the inverter USB port
After configuration,
Only Green LED flashes
ShineWiFi-X already connected to the home
router, but not connected
To Growatt ShineServer
1 Check if home router is connected to the internet
2 Check if the router firewall allows to select port 5279 and 5280
After configuration,
Only Blue LED flashes
ShineWiFi-X communication OK with inverter,
home router, and Growatt ShineServer
Normal working state
Red LED always ON
ShineWiFi-X module error
Need to replace with a new ShineWiFi-X
Green LED always ON
ShineWiFi-X cant connect to the home router
1 Check router information
a) Router name should consist of English letters and numbers, it
support special symbols
b) For safety reason, please use encrypted wireless network
c) It does not support public network that use secondar y authen
2 Check if you filled in the correct name and password of the home
when configuring it
Blue LED always ON
ShineWiFi-X module is in AP mode
Debug mode, short press the KEY button to quit
Operation
Description
When ShineWiFi-X is powered on,
remove the rubber plug, and press the
KEY button. (ShineWiFi LED will
change from flash to always ON)
ShineWiFi-X will enter to AP
mode. AP mode is a debug
mode, only allowed for
professional
When ShineWiFi-X in AP mode, press
The KEY button of ShineWiFi-X
(ShineWiFi-X LED will change from
always ON to flash)
Quit AP mode
Long press the KEY button for
More than 6 sec (ShineWiFi-X
All LEDs always ON)
Reset ShineWiFi-X to
Factory settings
Growatt ShineWiFi-X
Quick Installation Guideline
For more info, please download from http://server.growatt.com
+86 755 2747 1942 +86 755 2747 2131F
service ginverter.com www. growatt.com@ WE
Rotate the datalogger locker on the upper, make sure the triangle is on the front side and in the middle.
connect the datalogger to the inverter USB port, make sure the triangle is on the front side, press the locker and rotate clockwise until it is tighten.
2.
3.
T
T
T
TTu
u
u
uur
r
r
rrn o
n o
n o
n on on i
n i
n i
n in in
n
n
nnv
v
v
vve
e
e
eer
r
r
rrt
t
t
tte
e
e
eer a
r a
r a
r ar an
n
n
nnd c
d c
d c
d cd ch
h
h
hhe
e
e
eec
c
c
cck S
k S
k S
k Sk Sh
h
h
hhi
i
i
iin
n
n
nne
e
e
eeW
W
W
WWi
i
i
iiF
F
F
FFi
i
i
ii-
-
-
--X s
X s
X s
X sX st
t
t
tta
a
a
aat
t
t
tte
e
e
ee
Step2.
5. Scan QR code or input the ShineWiFi-X barcode and checkcode,
then click “Register, it will move you to the “Set ShineWifi-X
page.
6. Fill out the wifi network and password, then clickConfiguration, after successful configuration, a note
Configured successfully, then it will move to the “my plantpage.
Note: There are 3 LEDs on ShineWiFi-X, only the blue LED flashing indicates the ShineWiFi-X module i
connected to the router and Growatt Shine Server.
7.If the pop up a message says “Failed, please refer to Appendix A of the troubleshooting guide
to solve the problem. After that, login to your account and click the +” sign on the right top side
of the page, and selectDatalogger listin the appearing dialog window. Push on the dataloggers
serial number for 3 sec, until a small dialog window appears,select Configure datalogger. It
will move to the “Set ShineWifi-Xpage,enter the home routers name and password, then click,
Set” the connection configuration process will begin.
8.After successful configuration, it will move to the
plant” page, select the inverter in the device list to
inverter update information. check
the
9.If you want to add/edit/delete/configure a datalogger, click the “+sign on the right to
my plantpage. There are 4 options in the dialog window when push on the datalogg
click the one you need.
Add datalogger” is for adding a new ShineWiFi-X module to this account.
2) Edit datalogger” is used to assign an alias name for your ShineWiFi-X module.
3) Delete datalogger” is used to remove the ShineWiFi-X module from this account.
4 Configure datalogger” is used for configuring the connection of the ShineWiFi-X
number,
1)
)
router.
my
R
R
R
RRe
e
e
ees
s
s
sse
e
e
eet S
t S
t S
t St Sh
h
h
hhi
i
i
iin
n
n
nne
e
e
eeW
W
W
WWi
i
i
iiF
F
F
FFi t
i t
i t
i ti to F
o F
o F
o Fo Fa
a
a
aac
c
c
cct
t
t
tto
o
o
oor
r
r
rry S
y S
y S
y Sy Se
e
e
eet
t
t
ttt
t
t
tti
i
i
iin
n
n
nng
g
g
ggs
s
s
ss
Step4.
When you have changed your home router password, or changed to
you need to reset ShineWiFi-X to factory settings and Press the
KEY button up, then login to your
long press this
a new router,
reconfigure it.
for 6 sec, until all three LEDs long light
ShinePhone account, click the “+on right top of this page,
datalogger serial number to reconfigure.
Troubleshooting
Turn the triangle up and center,
then turn the lock clockwise


Produktspezifikationen

Marke: Growatt
Kategorie: Nicht kategorisiert
Modell: Shine WiFi-X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Growatt Shine WiFi-X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Growatt

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-